Introduction
The AULA SC360 SE is a versatile three-mode wireless mouse designed for various applications, including office work, general use, and e-sports gaming. It features a lightweight, ergonomic design, low latency, and a long-lasting battery, offering flexible connectivity options (wired, 2.4G wireless, and Bluetooth).

Setup Instructions
The AULA SC360 SE mouse supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. Choose the mode that best suits your device and needs.
1. Wired Connection
- Connect the provided Type-C USB cable to the mouse's charging port.
- Plug the other end of the USB cable into an available USB port on your computer.
- The mouse will automatically be recognized and ready for use.
2. 2.4G Wireless Connection
- Locate the 2.4G USB receiver stored in the compartment on the bottom of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- On the bottom of the mouse, slide the mode switch to the "2.4G" position.
- The mouse should connect automatically. If not, try turning the mouse off and on again.
3. Bluetooth Connection
- On the bottom of the mouse, slide the mode switch to the "BT" (Bluetooth) position.
- The mouse will enter pairing mode (indicated by a flashing light, if applicable).
- On your computer or device, open Bluetooth settings and search for new devices.
- Select "AULA SC360 SE" (or similar name) from the list of available devices to pair.
- Once paired, the mouse is ready for use.

Operating Instructions
DPI Adjustment
The mouse features a 6-level adjustable DPI setting, allowing you to customize cursor sensitivity for different tasks or games. The DPI button is located on the bottom of the mouse (as shown in the setup image) or may be accessible via a dedicated button on the top/side, depending on the specific model variant.
Available DPI settings: 800 - 1600 - 2400 - 3200 - 6400 - 10000.

Ergonomic Design
The AULA SC360 SE is designed with ergonomics in mind, providing a comfortable grip for various hand sizes and grip styles (palm, claw, fingertip). This design aims to reduce fatigue during extended use.

High Report Rate
The mouse supports a report rate of up to 1000Hz, which ensures ultra-low latency and smooth, precise tracking, particularly beneficial for gaming and fast-paced applications. Default report rates include 125Hz, 250Hz, 500Hz, and 1000Hz.

Maintenance
Charging Instructions and Precautions
To ensure the longevity of your mouse's battery and internal components, please follow these charging guidelines:
- Recommended Charging: Always use a computer's USB interface for charging the device.
- Avoid Heat: Keep the mouse away from high-temperature devices during charging.
- Long-Term Storage: If the mouse will not be used for an extended period, please turn off the power switch to conserve battery life.
Important Warnings:
- DO NOT use fast chargers designed for mobile phones to charge the device.
- DO NOT use inferior or non-standard power adapters to charge the device.
- DO NOT use over-voltage/over-current power adapters to charge the device.

Cleaning
To clean the mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components. Avoid using harsh chemicals or abrasive materials.
Troubleshooting
If you encounter issues with your AULA SC360 SE mouse, try the following steps:
- No Response/Connectivity Issues:
- Ensure the mouse is charged.
- Check the connection mode switch (Wired, 2.4G, BT) is set correctly.
- For 2.4G, ensure the USB receiver is securely plugged in. Try a different USB port.
- For Bluetooth, ensure Bluetooth is enabled on your device and the mouse is paired. Try re-pairing the mouse.
- Try restarting your computer or device.
- Lagging/Choppy Movement:
- Ensure the mouse is fully charged.
- Check for interference in 2.4G or Bluetooth mode (e.g., other wireless devices).
- Adjust the DPI setting to a lower value if movement is too sensitive.
- Ensure the mouse sensor is clean and free from debris.
- Buttons Not Responding:
- Ensure the mouse is powered on and connected.
- Test the buttons in a different application or on another computer to rule out software issues.
Specifications

| Feature | Detail |
|---|---|
| Model | SC360 SE |
| Dimensions | 119 × 62 × 40 ± 0.2mm |
| Weight | Approx. 54.5g (naked, without receiver) |
| Connection Modes | Wired, 2.4G Wireless, Bluetooth Wireless |
| DPI Adjustment | 6 levels: 800-1600-2400-3200-6400-10000 |
| Stable Current | 9mA (wireless), 200mA (wired) |
| Battery Capacity | 800mAh |
| Charging Interface | Type-C |
| Report Rate | 125-250-500-1000Hz (default) |
| Micro-motion Switches | 50 million clicks |
| IPS | 300 |
| Acceleration | 35G |
| Power Source | Battery |
| Operation Mode | Opto-electronic |
| Certification | CE |
| Ergonomics Support | Yes |
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the official AULA website or contact your retailer. Keep your proof of purchase for any warranty claims.
User Tips
- To maximize battery life, remember to switch the mouse off when not in use, especially for extended periods.
- Experiment with different DPI settings to find the sensitivity that best suits your tasks, whether it's precise graphic design or fast-paced gaming.
- If experiencing wireless interference, try moving the 2.4G receiver closer to the mouse or using a different USB port.
- Regularly clean the mouse sensor and surface to ensure optimal tracking performance.