Introduction
Thank you for choosing the Heimerdinger LB339 Lithium Battery Powered Brushless Cordless Framing Nail Gun. This powerful and versatile tool is designed for efficient fastening in various materials, including concrete, wood, and steel. Featuring a brushless motor, it offers enhanced performance and durability. This manual provides essential information for the safe and effective operation and maintenance of your new tool.
Safety Information
Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operation.
- Wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves.
- Ensure the work area is clean, well-lit, and free from obstructions.
- Keep children and bystanders away while operating the tool.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
- Use only the specified nails and accessories for this tool.
Setup
1. Battery Installation
The Heimerdinger LB339 is compatible with Makita 18V B-series lithium batteries (e.g., BL1850B, BL1840B, BL1830B). Ensure the battery is fully charged before use.
- Align the battery pack with the battery port on the bottom of the nail gun handle.
- Slide the battery pack into the port until it clicks securely into place.
- To remove, press the release button on the battery pack and slide it out.
2. Nail Loading
The nail gun uses 15-40mm straight nails with a gauge of 2.6-3.0mm.
- Ensure the tool is disconnected from the battery.
- Locate the hard nail slot/magazine on the front of the tool.
- Pull back the nail pusher until it locks into place.
- Insert a strip of nails into the magazine, ensuring the nail heads are properly seated.
- Release the nail pusher, allowing it to push the nails forward until they are firmly against the firing mechanism.

Figure 1: Hard oxidized nail clamps and improved nail insertion method.
3. Nozzle Changing
The tool features a rotary knob design for easy nozzle changes, allowing adaptation to different nail types and applications.
- Ensure the tool is disconnected from the battery.
- Rotate the knob at the front of the tool to loosen the current nozzle.
- Carefully remove the nozzle.
- Select the appropriate nozzle for your task (e.g., wire clamp, mount, ride a horse, hoist gun nozzle).
- Insert the new nozzle and rotate the knob to secure it firmly.

Figure 2: Rotary knob design for convenient gun nozzle changes.
Operating Instructions
1. Powering On/Off
Locate the power on/off key on the tool's handle. Press it to turn the tool on or off. The tool may also feature a lighting lamp for improved visibility in dimly lit areas.

Figure 3: Key components of the Heimerdinger LB339 nail gun.
2. Driving Nails
The LB339 features a single-shot burst trigger for controlled nail driving. It can drive nails at a rate of 2 pieces per second.
- Ensure the battery is installed and the tool is powered on.
- Place the nozzle firmly against the workpiece where the nail is to be driven.
- Press the trigger to drive a nail.
- Release the trigger to prepare for the next nail.

Figure 4: The straight nail gun can hit deeper, penetrating powerfully.
3. Applications
This tool is suitable for a wide range of applications in home decoration and industrial settings, including:
- Concrete floor ceilings
- Floor laying
- Formwork fixing
- Wall installations
- Fastening into multi-layer wood board and density board
- Driving into cement ground and steel (up to 5mm thickness)

Figure 5: Versatile applications on various materials.
Video 1: Demonstration of the Heimerdinger LB339 nail gun in action on different surfaces and with various attachments.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your nail gun.
- Cleaning: Keep the tool clean and free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
- Nail Magazine: Periodically inspect the nail magazine for any obstructions or damage. Ensure nails feed smoothly.
- Nozzle: Check the nozzle for wear or damage. Replace if necessary to ensure proper nail driving.
- Storage: Store the tool in a dry, secure place, out of reach of children. Remove the battery pack before storage.
Troubleshooting
If you encounter issues with your nail gun, refer to the following common troubleshooting tips:
- Nail Jamming: If nails are jamming, ensure the correct nail size and type are being used. Check the nail magazine for bent nails or debris. Ensure the nail pusher is functioning correctly.
- Tool Not Firing: Verify that the battery is fully charged and properly installed. Check if the power switch is in the 'ON' position. Ensure the nozzle is firmly pressed against the workpiece.
- Reduced Power: A partially discharged battery can lead to reduced power. Ensure the battery is fully charged.
- Unusual Noise/Vibration: Discontinue use immediately and inspect the tool for any loose parts or damage. If the issue persists, contact customer support.
Specifications
| Attribute | Value |
|---|---|
| Model Number | LB339 |
| Brand Name | Heimerdinger |
| Type | Framing Nail Gun |
| Power Source | Electricity (Cordless, Battery Powered) |
| Motor Type | Brushless |
| Voltage | DC18-21V |
| Rated Power | 1800W |
| Nail Length | 15-40 mm |
| Nail Gauge (Diameter) | 2.6-3.0 mm |
| Nail Driving Speed | 2 pieces/second |
| Max Iron/Steel Thickness | 5mm |
| Handheld | Yes |
| Battery Included | Varies by package option (available with 1 or 2 batteries of 2A, 4A, or 6A capacity, or without battery) |
| High-concerned chemical | none |
| Origin | Mainland China |
| Use | Renovation Team |

Figure 6: Heimerdinger LB339 with key specifications.
User Tips
- Always test the nail gun on a scrap piece of material before working on your main project to ensure proper depth and function.
- Keep the tool's ventilation openings clear to prevent overheating, especially during prolonged use.
- For optimal performance and battery life, use genuine Heimerdinger or compatible Makita 18V B-series batteries.
- When working overhead or in tight spaces, utilize the portable hook for temporary storage or to keep the tool within reach.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the Heimerdinger Official Store directly. Keep your proof of purchase for warranty claims.