CARABC CX-3GQ7

Contents

CARABC Wireless CarPlay & Android Auto Adapter

User Manual for Audi A6 Q7 (2010-2015) MMI 3G System

1. Product Overview

The CARABC Wireless CarPlay & Android Auto Adapter (Model: CX-3GQ7) is designed to upgrade your Audi A6 or Q7 (2010-2015) with MMI 3G system, enabling seamless integration of CarPlay, Android Auto, Mirror Link, and other smart features. This module allows you to retain original car controls while enhancing your in-car entertainment and navigation experience.

CARABC Wireless CarPlay Android Auto Adapter and Audi MMI 3G system integration

Figure 1: Product overview and in-car display example.

Key Features:

  • Wireless and Wired CarPlay & Android Auto
  • Mirror Link functionality
  • Built-in 2.4G and 5.8G WIFI, Bluetooth 5.0
  • Supports USB Flash drive for media playback
  • Control via original steering wheel, touch (if applicable), and knob controls
  • Voice control support (e.g., "Hey Siri...")
  • GPS navigation apps (Google Maps, Waze, Apple Maps) with real-time traffic
  • Built-in DSP for adjustable audio EQ
  • 2 RCA inputs for rear and front PAL, NTSC, and CVBS AHD cameras
  • Supports HD 360 panoramic cameras and dynamic guidance lines
  • Plug-and-play, non-destructive installation
  • Seamless switching between original car system and CarPlay/Android Auto display

2. Specifications

AttributeValue
ModelCX-3GQ7
Operating Voltage9-16V
Operating Temperature-30°C to +75°C
Stored Temperature-30°C to +85°C
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Power Consumption500mA (rated), 3A (Max)
Shutdown Current3mA (Clock is on)
Quiescent CurrentLess than 3mA
Charging Current≤2A (Host activates circuit protection if current >1A)
Dimensions (Module)135mm x 70mm x 20mm (approx.)
Package Weight1.0 kg
OriginMainland China

Compatibility:

This adapter is compatible with Audi A6 and Q7 models from 2010-2015 equipped with the MMI 3G system and a 6.5" or 7" screen.

Compatibility table for Audi MMI 3G models and screen sizes, with visual guides for MMI system identification

Figure 2: Compatible models and MMI 3G system identification guide.

To ensure compatibility, verify your car's MMI system version. Navigate to 'Setup' -> 'Informazioni versione' (or 'Version information') on your car's display. Look for software versions like BNav_EU_K0260_1_D1 (MMI 3G Low/Basic) or HNav_EU_K0253_D1 (MMI 3G High). The system is NOT compatible if your car has an 'Audi CD changer' button, but IS compatible if it has an 'AC' button.

3. Installation

Pre-Installation Steps:

  1. Before entering the installation system, connect your phone to the original car's Bluetooth for both call and media. Select the original car audio on the Bluetooth stereo interface.
  2. Alternatively, switch the original car sound channel to the AUX channel before installation.

Wiring Diagram:

Detailed installation diagram showing wiring connections for the CX-3GQ7 adapter to the Audi MMI 3G system, including power, LVDS, antenna, microphone, camera inputs, and USB. Also shows steering wheel and central control knob instructions.

Figure 3: CX-3GQ7 Installation Diagram.

Refer to the diagram for precise connections. Key connections include:

  • LVDS: Connect to LVDS from the original head unit.
  • ANT: Connect the Wi-Fi antenna. Note: Antennas cannot be attached to hardware surfaces.
  • POWER: Connect the power cable.
  • Power Cable Wires: Yellow (B+), Red (ACC), Black (GND), Blue (Camera power supply).
  • Brown Wire: Re detect.
  • White and Black Wires: 360-RX.
  • MIC: Extra Mic Port.
  • REAR-CVBS: Rear view input.
  • FRONT-CVBS: Front view input.
  • AUX: Audio output.
  • USB: Connect phone, USB disk, software update.

Attention: When plugging into the host end, ensure all parts are securely fastened.

Dip Switch Configuration:

CAUTION: Please ensure CarPlay POWER is disconnected when adjusting the dip switches. Once the dip switches are set, then connect CarPlay POWER.

Switch12345678Car Model / Screen Size
Setting 1OFFONOFFONOFFOFFOFFOFF09-11 A6, 09-15 Q7 (6.5"/7"/8")
Setting 2OFFOFFOFFOFFOFFOFFOFFON09-18 A1/Q3 (NAV)
Setting 3OFFOFFONOFFOFFOFFOFFOFF12-15 A6/A7
Setting 4OFFONONOFFOFFOFFOFFOFF11-15 A6 RMC

4. Operation

Dual System Switch:

The adapter allows seamless switching between the original car system and the CarPlay/Android Auto interface. This ensures you can always access your car's native functions.

Car display showing both CarPlay and Android Auto interfaces, illustrating the dual system switch capability.

Figure 4: Dual System Switch - CarPlay and Android Auto interfaces.

Wireless CarPlay Connection:

  1. On your iPhone, open Wi-Fi and Bluetooth settings.
  2. Click 'Discover and connect device'.
  3. Select the Bluetooth device name starting with "CX_BT..." (e.g., CAR-BT-5334).
  4. Pair your iPhone with the device.
iPhone screen showing CarPlay interface with navigation, voice call, and music apps. Also shows connection steps for Wireless CarPlay.

Figure 5: Wireless CarPlay interface and connection steps.

Wireless Android Auto Connection:

  1. On your Android phone, open Wi-Fi and Bluetooth settings.
  2. Click the Bluetooth device name starting with "CX-BTXXXX".
  3. Pair your Android phone with the device.
Android phone screen showing Android Auto interface with navigation, voice call, and music apps. Also shows connection steps for Wireless Android Auto.

Figure 6: Wireless Android Auto interface and connection steps.

Control Methods:

The system supports multiple control methods, allowing you to interact with CarPlay/Android Auto conveniently:

  • Touch Screen: Directly interact with the display (if your car has a touch-enabled screen).
  • Steering Wheel Control: Use your car's original steering wheel buttons for functions like volume adjustment.
  • Central Control Knob: Long press to switch systems, rotate to move the cursor, short press to confirm, long press to activate voice control, short press up/down for song selection.
  • Voice Control: Use voice assistants like Siri or Google Assistant for navigation, calls, music, and other commands.
Images showing touch screen, steering wheel controls, and central control knob being used to operate the car's infotainment system.

Figure 7: Original car control methods for the adapter.

Driver using voice commands to control the car's system, with examples like 'Call Tom', 'Navigate to the airport', and 'Easy on me' on Spotify.

Figure 8: Voice control functionality.

Navigation and Media:

  • Online Navigation: Supports various map options like Waze, Google Maps, Apple Maps, NAVER Maps, and T Maps, providing real-time traffic information.
  • Music Playback: Enjoy mobile music and USB music synchronously with Hi-Fi sound quality.
  • Mirror Link: Stream content from your smartphone directly to the car's display.
Car display showing various navigation apps like Waze, Google Maps, and Apple Maps.

Figure 9: Online Navigation options.

Icons representing USB Play Music and APP Plays Music, indicating different sources for audio playback.

Figure 10: Music Playback options.

A smartphone mirroring its screen content, a car, to the car's infotainment display.

Figure 11: Mirror Link functionality.

Camera Support:

The adapter supports both factory original and aftermarket reverse cameras, parking radar, and 360 cameras. It provides dynamic guidance lines and OEM parking style display.

  • Adding Reversing Camera Wiring: Connect 'cam-power' to the camera power supply. Connect 'rear-CVBS/AHD720P' to the camera input.
Car display showing a rear camera view with parking guidelines, indicating support for HD rear cameras.

Figure 12: HD Rear Camera display.

5. Car Settings (Post-Installation)

After installation, you may need to adjust certain settings within the car's system to optimize the adapter's functionality.

Audio Settings:

  • If your original car has Bluetooth phone functionality, an additional microphone may not be needed.
  • Navigate to 'Setup' -> 'Audio settings'.
  • Ensure 'Use the original Bluetooth audio' is set to 'OFF' for the adapter's audio to function correctly.
  • For cell phone Bluetooth connection to the original car Bluetooth audio, select 'Bluetooth audio playback' and set 'Use the original Bluetooth audio' to 'ON'.
  • Select 'AUX' for original multimedia selection.

Camera Settings:

The system allows configuration for parking guidelines, original camera, park distance control, 360 panoramic view, AHD camera type, and reverse exit delay.

  • The adapter supports the original camera being turned off when a reverse camera is added.

6. Troubleshooting

  • Screen not displaying normally: Check the LVDS cable connection and verify the DIP Switch settings according to your car model.
  • Sound problems: Ensure the Multimedia and install system settings of the original car are correctly configured. Check if the original car audio channel is set to Bluetooth or AUX as per pre-installation steps.
  • Mainframe pilot lamp not working: Inspect the power cable connection and check if the fuse is normal.

7. Maintenance and Support

To maintain optimal performance, ensure all connections remain secure and free from moisture or damage. Regularly check for software updates if available from the manufacturer.

For detailed instructions and further assistance, you can refer to the official user manual PDF:

View User Manual (PDF)

For any technical support or warranty inquiries, please contact CARABC Official Store customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.