1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Kailh Raptor Series Purple Kite Mini Silent Switches. These low-profile linear switches are designed for mechanical keyboards, offering a quick trigger and silent operation, ideal for applications like hitbox gaming.
2. Specifications
The Kailh Raptor Series Purple Kite Mini Silent Switch features the following technical specifications:
| Feature | Specification |
|---|---|
| Product Name | Purple Kite Mini Silent Switch |
| Model Number | CPG1353D01D01-40 |
| Switch Type | MICRO SWITCH |
| Material | Plastic (PC for top cover, POM for stem, Nylon for base) |
| Trigger Force | 30 ± 10gf |
| Trigger Stroke | 0.8 ± 0.30mm |
| Total Travel | 1.8 +0.4/-0mm |
| Resilience | 10gf min |
| Mechanical Lifespan | 50 million cycles |
| Noise Level | 25dB |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Certification | RoHS, CE |
| Origin | Mainland China |
Force-Travel Diagram:

This diagram illustrates the force required versus the travel distance of the switch, showing the operating point and return point.
3. Component Breakdown
The Kailh Raptor Series Purple Kite Mini Silent Switch is composed of several key parts:

An exploded view showing the individual components: Top Cover (PC material), Stem (POM material), Silencer Ring (high-quality rubber), Moving Contact (static sheet-beryllium copper, moving sheet-phosphor bronze), Stainless Steel Spring (15mm length), and Base (Nylon material).
4. Installation Instructions
Follow these steps to properly install your Kailh Raptor Series Purple Kite Mini Silent Switches:
- Remove the Keycap: Use a professional keycap remover tool to carefully pull out the existing keycap from the switch.
- Remove the Old Switch (if applicable): If replacing an existing switch, use a switch puller to gently pull the old switch vertically upwards until it detaches from the PCB.
- Prepare the New Switch: Align the new switch with the installation position on the PCB.
- Check Pins: Before installation, carefully check that the metal pins on the bottom of the new switch are not bent or crooked. If they are, use small pliers or similar tools to gently straighten them.
- Install the New Switch: Place the new switch into the slot on the PCB and press it down vertically. Apply even pressure until you hear a click, indicating it is securely seated.
- Reattach the Keycap: Once the switch is installed, place the keycap back onto the stem of the new switch and press down firmly.
Visual Guide for Installation:

Image showing the Kailh Purple Kite Mini Silent Switch, highlighting its low-profile design and readiness for installation.
5. Operation
The Kailh Raptor Series Purple Kite Mini Silent Switches are designed for linear, quick-trigger action with minimal noise. Simply press the keycap to actuate the switch. The low actuation force and short travel distance ensure a responsive and comfortable typing or gaming experience.
Key Features in Operation:
- Silent Operation: With a noise level of 25dB, these switches provide a quiet experience, suitable for environments where noise reduction is desired.
- Quick Trigger: An actuation distance of 0.8mm allows for rapid key presses, beneficial for fast-paced gaming.
- Linear Feel: Provides a smooth, consistent keystroke without a tactile bump or audible click.
Silent Operation Visual:

This image emphasizes the silent nature of the switch, rated at 25dB, allowing for quiet operation at any time.
Short Stroke Comparison:

A visual comparison showing the 0.8mm trigger stroke of the Purple Kite Mini switch versus a regular switch with a 3.8mm total travel, illustrating the quick trigger advantage.
6. Maintenance
To ensure the longevity and optimal performance of your Kailh Raptor Series Purple Kite Mini Silent Switches, follow these maintenance guidelines:
- Regular Cleaning: Periodically remove keycaps and use compressed air to clear dust and debris from around the switches. A soft brush can also be used for stubborn particles.
- Avoid Liquid Spills: Liquids can damage the internal components of the switches. In case of a spill, immediately disconnect the keyboard, remove affected keycaps, and allow the switches to dry completely before reassembly.
- Gentle Handling: When removing or installing switches, always use appropriate tools and apply gentle, vertical force to avoid bending the pins or damaging the switch housing.
- Storage: If storing switches separately, keep them in a clean, dry, and dust-free environment.
7. Troubleshooting
Here are some common issues and their solutions:
- Switch not actuating or inconsistent actuation:
- Ensure the switch is fully seated in the PCB. Press down firmly until it clicks into place.
- Check the switch pins for bends or damage. If bent, carefully straighten them with pliers.
- Clean any debris or dust that might be obstructing the switch mechanism.
- Test the switch in another slot or with a different keycap to isolate the problem.
- Keycap feels loose or wobbly:
- Ensure the keycap is correctly aligned and pressed down firmly onto the switch stem.
- Inspect the keycap's cross-mount for any cracks or damage.
- Increased noise from a switch:
- Clean the switch to remove any foreign particles that might be causing friction or noise.
- Ensure the silencer ring is properly seated within the switch components.
8. User Tips
- When installing multiple switches, it's good practice to test each switch after installation to ensure proper functionality before installing all keycaps.
- For optimal performance in gaming, ensure your keyboard's firmware is up-to-date to take full advantage of the quick trigger response.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Kailh website or contact your retailer. Keep your proof of purchase for warranty claims.
A user manual in PDF format is available for download from the seller's documentation section. This document provides additional details and diagrams for your reference.