1. Introduction
The RIGOL MHO984 is a professional digital oscilloscope designed for various electronic measurement and development applications. This product is a specialized electronic module/development board. Due to the diverse application scenarios and wiring methods, a single, unified printed manual cannot cover all specific configurations.
Important Note: For specific wiring diagrams, driver files, or detailed technical documentation tailored to your application, please contact RIGOL customer service. They will provide full technical support and guidance for your specific model and setup.
Figure 1: RIGOL MHO984 Digital Oscilloscope
2. Setup
- Unpacking: Carefully remove the oscilloscope and all accessories from the packaging. Inspect for any signs of damage.
- Power Connection: Connect the appropriate power cord (available in US, EU, UK, AU plug types) to the oscilloscope and a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
- Probe Connection: Connect your oscilloscope probes (e.g., passive voltage probes, logic analyzer probes like PLA2216) to the input channels. Ensure a secure connection.
- Initial Power-On: Turn the power switch to the ON position. The device should boot up and display the main interface on the 7-inch HD touch screen.
- External Connections: If using external devices, connect them via the standard USB2.0 Device & Host, LAN (100M), or HDMI interfaces as required.
Note: For detailed wiring instructions specific to your application or for connecting optional accessories like the PLA2216 logic analyzer probe or AFG50 function generator, refer to the specific documentation provided by RIGOL or contact customer support.
3. Operating the Oscilloscope
The MHO984 offers a wide range of features for signal analysis. Utilize the 7-inch HD touch screen and the intuitive Flex knob for navigation and parameter adjustment.
Key Features and Capabilities:
- High Resolution: 12-bit vertical resolution for precise measurements.
- Bandwidth & Channels: Max. 800 MHz analog bandwidth with 4 analog channels.
- Digital Channels: Supports 16 digital channels with the optional 200 MHz PLA2216 logic analyzer probe.
- Sampling Rate: Real-time sample rate up to 4 GSa/s.
- Memory Depth: Max. memory depth of 500 Mpts (optional) for capturing long waveforms.
- Vertical Sensitivity: Adjustable from 200 μV/div to 10 V/div.
- Waveform Capture Rate: High waveform capture rate of 1,000,000 wfms/s for observing transient events.
- Display: Digital phosphor display with real-time 256-level intensity grading for visualizing signal density.
- Integrated Generator (Optional): Optional 2-channel, 50 MHz/100 MHz Function/Arbitrary Waveform Generator (Bode plot supported).
- Analysis Tools: Supports histogram, digital signal analysis, waveform search, and navigation functions for faster debugging of signal anomalies.
- User Interface: 7" (1024x600) HD touch screen and Flex knob for user-friendly operation.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the oscilloscope. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents.
- Environmental Conditions: Operate and store the device in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Ventilation: Ensure that the ventilation openings are not obstructed to prevent overheating.
- Software Updates: The device supports online upgrade of software versions. Regularly check for and install updates to ensure optimal performance and access to new features.
5. Troubleshooting
If you encounter issues with your RIGOL MHO984, consider the following basic troubleshooting steps:
- No Power: Check the power cord connection to both the oscilloscope and the power outlet. Ensure the power switch is ON.
- No Signal Display: Verify that probes are correctly connected to both the oscilloscope and the circuit under test. Check probe settings and channel input settings on the oscilloscope.
- Unresponsive Screen/Controls: Try restarting the device. If the issue persists, contact support.
- Software Glitches: Ensure your firmware is up to date. Perform a factory reset if necessary (consult support documentation for instructions).
For complex issues, technical assistance, or specific error messages, please contact RIGOL customer service.
6. Specifications
| Feature | Specification |
|---|---|
| Resolution | 12-bit |
| Analog Bandwidth | Max. 800 MHz |
| Analog Channels | 4 |
| Digital Channels | 16 (with optional PLA2216) |
| Real-time Sample Rate | Up to 4 GSa/s |
| Memory Depth | Max. 500 Mpts (option) |
| Vertical Sensitivity | 200 μV/div to 10 V/div |
| Waveform Capture Rate | 1,000,000 wfms/s |
| Display | 7" (1024x600) HD Touch Screen |
| Function Generator | Optional 2-channel, 50 MHz/100 MHz (Bode plot supported) |
| Interfaces | USB2.0 Device & Host, LAN (100M), HDMI |
| Dimensions (L x W x H) | 15 cm x 10 cm x 7 cm (approximate package size) |
| Weight | 0.3 kg (approximate package weight) |
7. Warranty and Support
For any questions regarding the use of your RIGOL MHO984 Digital Oscilloscope, or if you require specific wiring diagrams, driver files, technical documentation, or troubleshooting assistance, please contact RIGOL customer service.
RIGOL is committed to providing full technical support and guidance for your specific model and application needs. Please refer to your purchase documentation for warranty details and contact information.
Seller: ChipBoard Development Store