TaskStar 2-in-1 Electric Pole Saw & Cordless Chainsaw

1. Product Overview

The TaskStar 2-in-1 Electric Pole Saw and Cordless Chainsaw is a versatile tool designed for efficient tree cutting, gardening trimming, small branch shearing, and bush pruning. It features an 8-inch cutting diameter, a powerful brushless motor, and an adjustable telescopic pole for extended reach. This tool can be used as a handheld mini chainsaw or attached to the extension pole for high-reach tasks.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x 8-inch Mini Chainsaw Unit
• 2 x 4000mAh 21V Lithium-Ion Batteries
• 1 x Telescopic Extension Pole (adjustable up to 9.4ft)
• 2 x Chains (one pre-mounted)
• 1 x Battery Charger
• 1 x Goggles
• 1 x Gloves
• 1 x User Manual (this document)

3. Safety Information

WARNING: Always wear appropriate personal protective equipment (PPE) including safety goggles, gloves, and hearing protection when operating the chainsaw. Read and understand all safety instructions before use.

3.1 General Safety Features

• Safety Lock Design: Prevents accidental activation of the chainsaw.
• Large Handguard: Provides protection for your hand during operation.
• Splash Guard: Helps prevent wood chips and debris from splashing towards the user.
• Anti-Slip Grip: Ensures a firm and comfortable hold on the tool.

3.2 Personal Protective Equipment (PPE)

• Goggles: Protect your eyes from flying wood chips and debris.
• Gloves: Protect your hands from cuts, splinters, and vibrations.
• Hearing Protection: Recommended for prolonged use to prevent hearing damage.
• Sturdy Footwear: To maintain balance and protect feet.

4. Setup and Assembly

4.1 Battery Charging and Installation

1. Ensure the battery charger is connected to a power outlet.
2. Insert the 4000mAh battery into the charger. The charging time is approximately 2 hours per battery.
3. Once fully charged, remove the battery from the charger.
4. Align the charged battery with the battery slot on the chainsaw unit (either mini chainsaw or pole saw handle) and push firmly until it clicks into place.

4.2 Chain Installation and Tensioning

The chainsaw comes with one chain pre-mounted. If you need to replace or adjust the chain:

1. Ensure the battery is removed from the chainsaw for safety.
2. Loosen the two nuts securing the side cover of the chainsaw.
3. Carefully remove the side cover and the old chain (if replacing).
4. Place the new chain around the guide bar, ensuring the cutting teeth are facing the correct direction.
5. Re-attach the side cover and hand-tighten the nuts.
6. Use the tool-free chain tensioning knob to adjust the chain tension. Turn the knob to achieve proper tension – the chain should be snug but still able to be pulled slightly away from the guide bar.
7. Once tensioned, fully tighten the two nuts to secure the side cover.

4.3 Automatic Oiling System Setup

The chainsaw features an automatic oiling system for continuous lubrication.

1. Locate the oil reservoir cap on the chainsaw unit.
2. Unscrew the cap and pour up to 30ml of appropriate chainsaw bar and chain oil into the reservoir.
3. Tighten the cap securely.
4. Before starting, squeeze the bulb a few times to prime the system and ensure oil reaches the chain.

4.4 Telescopic Pole Assembly

To convert the mini chainsaw into a pole saw:

1. Ensure the battery is removed from the mini chainsaw unit.
2. Attach the mini chainsaw unit securely to the end of the telescopic extension pole. Follow the locking mechanism instructions to ensure a firm connection.
3. Adjust the pole to your desired length, up to 9.4ft, by extending the sections and locking them in place. This allows for a reach of up to 15ft.
4. The cutting head can be adjusted up to 120 degrees for optimal cutting angles.

5. Operating Instructions

5.1 Pre-Operation Checklist

• Ensure battery is fully charged and securely installed.
• Check chain tension and ensure it is properly lubricated.
• Verify all connections (for pole saw) are secure.
• Wear all recommended PPE (goggles, gloves, etc.).
• Clear the work area of bystanders, pets, and obstacles.

5.2 Starting and Stopping the Chainsaw

1. To start, press the safety lock button and then squeeze the trigger simultaneously.
2. To stop, release the trigger. The safety lock will automatically reset.

5.3 Cutting Techniques

• Mini Chainsaw Use: Hold the chainsaw firmly with both hands, ensuring a stable grip. Position the chainsaw against the wood and engage the trigger. Allow the saw to do the work; do not force it.
• Pole Saw Use: Maintain a balanced stance. Extend the pole to the appropriate length, ensuring you have control. Use the 120° adjustable head to find the best cutting angle. Make cuts in a controlled manner, avoiding overreaching.
• For branches, make an undercut first to prevent bark stripping, then complete the cut from above.
• The 800W brushless motor provides a chain speed of 8m/s (26ft/s), allowing for efficient cuts, typically cutting branches in 8 seconds (actual time may vary).

6. Maintenance

6.1 General Cleaning

• Always remove the battery before cleaning.
• Use a dry cloth or soft brush to remove sawdust and debris from the chainsaw body, guide bar, and chain.
• Do not use water or solvents that could damage the tool.

6.2 Chain Lubrication

• Regularly check the oil level in the automatic oiling system. Refill as needed with appropriate bar and chain oil.
• Ensure the oiling system is functioning correctly by observing oil on the chain during operation.

6.3 Chain Tension and Sharpening

• Check chain tension before each use and adjust using the tool-free tensioning knob if necessary.
• A dull chain will reduce cutting efficiency and increase strain on the motor. Sharpen the chain regularly or replace it when necessary.

6.4 Storage

• Store the chainsaw and batteries in a dry, cool place, away from direct sunlight and moisture.
• Ensure the battery is removed from the tool before storage.
• Keep out of reach of children.

7. Troubleshooting

8. Specifications

9. User Tips

• For optimal battery life and performance, fully charge batteries before first use and store them in a cool, dry place when not in use.
• Always ensure the chain is sharp and properly tensioned for clean, efficient cuts and to prevent kickback.
• When using the pole saw, take advantage of the 120° adjustable head to achieve the best cutting angle without straining yourself.
• Keep the automatic oiling system reservoir filled to ensure continuous lubrication and extend the life of your chain and guide bar.
• The tool is lightweight, but for extended pole saw use, consider using the included shoulder strap to reduce fatigue.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: TaskStar

Please refer to the official TaskStar website or your purchase documentation for the most up-to-date contact information and warranty details.