KAWA D9

Contents

KAWA Dash Cam D9 User Manual

Better life, safer and smarter.

1. Product Overview

The KAWA Dash Cam D9 is a high-performance automotive camera designed to record your driving experiences in ultra-clear 4K resolution. It features voice control, built-in GPS, Wi-Fi 6, G-sensor, and 24/7 parking monitoring capabilities.

KAWA D9 Dash Cam with key features: 4K (2160P), Voice Control, 2K DHR, Tiny Rear Camera, and 2 Year Warranty.

Figure 1: KAWA Dash Cam D9 with highlighted features.

Product Components

Refer to the diagram below for an overview of the dash cam's parts:

Diagram showing front, side, and top views of the KAWA Dash Cam D9 with numbered components: 1. Cooling hole, 2. Holder, 3. Rear camera interface, 4. Display, 5. LED, 6. TF Card Slot, 7. Power Port, 8. MIC, 9. Function Button, 10. Speaker, 11. Lens.

Figure 2: KAWA Dash Cam D9 Component Diagram.

  1. Cooling hole: For heat dissipation.
  2. Holder: Mounting point for the dash cam.
  3. Rear camera interface: Port for connecting the rear camera.
  4. Display: Small screen for live view and playback.
  5. LED: Status indicator light.
  6. TF Card Slot: For inserting the microSD card.
  7. Power Port: USB Type-C port for power supply.
  8. MIC: Microphone for audio recording.
  9. Function Button: Multi-purpose button for controls.
  10. Speaker: For audio output.
  11. Lens: Main camera lens.

2. Setup

2.1 Package Contents

Please check the package to ensure all items are present:

Contents of the KAWA Dash Cam D9 package: Dash Cam, Rear Cam, Car Charger, Power Cord, User Manual, Crowbar, Anti-static Film.

Figure 3: Package Contents.

  • Front Camera (Dash Cam)
  • Rear Camera
  • User Manual
  • Car Charger
  • Crowbar (Pry Tool)
  • Electrostatic Sticker (for mounting)
  • USB Cable (Power Cord)

2.2 Important Power Notice

WARNING: Always use the original car charger or hardwire kit provided with the device. Connecting the dash cam directly to the car's USB port or using a phone charger may cause unstable power output, damage the main board, and void your warranty.

Important Notice warning against using non-original power sources like car USB ports or phone chargers, as it can damage the dash cam and void the warranty.

Figure 4: Important Power Supply Warning.

2.3 TF Card Installation

The KAWA Dash Cam D9 supports 32GB-256GB capacity with Class 10 or higher speed rating. For optimal performance, use a genuine U3 high-speed card from a reputable brand. Low-quality TF cards may cause abnormal video recording or TF card failure.

  1. Ensure the dash cam is powered off.
  2. Locate the TF Card Slot on the side of the dash cam.
  3. Insert the microSD card into the slot until it clicks into place.
Close-up of the KAWA Dash Cam D9 showing a 64GB microSD card being inserted into the TF card slot.

Figure 5: Inserting the TF Card.

2.4 Front Camera Installation

Follow these steps to install the front dash cam:

  1. Clean the area on your windshield where you intend to mount the dash cam.
  2. Remove the electrostatic sticker from its backing and place it on the cleaned windshield area.
  3. Peel off the adhesive paper from the dash cam holder.
  4. Stick the dash cam onto the electrostatic sticker, ensuring a secure fit.
  5. The cover plate features a detachable design for easy adjustment or removal.
  6. Route the power cord along the edge of the windshield and dashboard to the car charger, using the pry tool if necessary to tuck the cable neatly.
Eight-step visual guide for dash cam installation: 1. Clean windshield, 2. Apply electrostatic sticker, 3. Attach dash cam to sticker, 4. Insert TF card, 5. Attach rear camera, 6. Connect power to dash cam, 7. Route power cable, 8. Plug car charger into power outlet.

Figure 6: Front Camera Installation Steps.

2.5 Rear Camera Installation

For optimal viewing, position the rear camera on your vehicle's rear window. Connect the angled USB connector to the rear camera and the straight connector to the front unit.

  1. Clean the area on your rear window where you intend to mount the rear camera.
  2. Apply the small electrostatic sticker to the cleaned area.
  3. Attach the rear camera to the electrostatic sticker. Ensure the camera is oriented correctly for the best view behind the vehicle.
  4. Route the rear camera cable to the front dash cam and connect it.

2.6 APP Installation

The KAWA AUTO app allows you to control your dash cam, view footage, and adjust settings.

  1. Scan the QR code below to download the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.