1. Introduction
Welcome to the KUGOO M3 PRO E-Scooter user manual. This guide provides essential information for the safe operation, maintenance, and optimal performance of your new electric scooter. Please read this manual thoroughly before your first ride and keep it for future reference.
The KUGOO M3 PRO is designed for urban mobility, featuring a powerful 600W brushless motor, a long-range 48V 13Ah battery, 10-inch pneumatic tires, and advanced safety features like dual braking and an integrated LED lighting system.
2. Important Safety Warnings
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
- Do not ride in heavy rain, snow, or icy conditions.
- Avoid riding on uneven or slippery surfaces.
- Ensure all bolts and quick releases are securely tightened before each ride.
- Do not allow children under the age of 16 to ride the scooter.
- Adhere to local traffic laws and regulations.
- Do not perform stunts or sudden maneuvers.
- Maintain a safe distance from other vehicles and pedestrians.
- Do not operate the scooter under the influence of alcohol or drugs.
- Regularly check tire pressure, brakes, and overall condition of the scooter.
3. Package Contents
Please check the box for the following items:
- 1 x KUGOO M3 PRO E-Scooter
- 1 x Charger
- 1 x Combination Tool
- 1 x Instruction Book
- 1 x Bell
- 1 x Gloves
- 2 x NFC Card
4. Setup and Initial Preparation
4.1 Unfolding the Scooter
- Place the scooter on a flat surface.
- Release the folding mechanism latch, usually located near the base of the handlebar stem.
- Carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged.
- Adjust the handlebar height if applicable and secure it.
4.2 Checking Tire Pressure
The KUGOO M3 PRO is equipped with 10-inch pneumatic rubber tires. For optimal performance and safety, ensure the tire pressure is maintained at 50 PSI. Use a suitable pump with a pressure gauge to check and adjust the pressure before your first ride and periodically thereafter.
4.3 Initial Charging
Before your first ride, fully charge the scooter's battery. The charging time is approximately 9 hours with the included charger. The charger input is 100-240V and output is 54.6V, 1.5A.
- Locate the charging port on the scooter.
- Connect the charger to the charging port.
- Plug the charger into a power outlet.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- Disconnect the charger once charging is complete.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the power button on the handlebar display to turn the scooter on or off. The LED display will illuminate upon powering on.
5.2 NFC Smart Unlocking
The M3 PRO supports NFC unlocking for easy access and anti-theft security. To unlock, simply tap one of the provided NFC cards against the designated NFC reader area on the display panel.
5.3 Speed Modes
The scooter offers three adjustable speed modes to suit different riding conditions and preferences:
- Eco Mode: Up to 22 km/h
- Sport Mode: Up to 35 km/h
- Race Mode: Up to 46 km/h (Max Speed)
You can switch between these modes using the control button on the handlebar. The current speed mode will be indicated on the LED display.
5.4 Braking System
The M3 PRO is equipped with a comprehensive braking system for confident and safer rides:
- Electric Brake: Engaged by the throttle lever.
- Front and Rear Disc Brakes: Operated by brake levers on the handlebar.
Always use both braking systems simultaneously for maximum stopping power and control, especially at higher speeds or in emergency situations.
5.5 LED Lighting System
The integrated LED lighting system ensures visibility and safety, particularly during night rides or in low-light conditions. It includes:
- Bright Headlight
- Taillight
- Dual Turn Signals
Ensure the lights are functional before riding in low visibility conditions.
6. Maintenance
6.1 Cleaning
Regularly clean your scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents, as this can damage electrical components and bearings. Ensure the charging port cover is securely closed during cleaning.
6.2 Battery Care
- Charge the battery fully after each use, especially if it will be stored for an extended period.
- Avoid completely draining the battery, as this can reduce its lifespan.
- Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
- The battery has a protection system and a waterproof level of IP65.
6.3 Tire Maintenance
Check the tire pressure regularly and maintain it at 50 PSI. Inspect tires for wear, punctures, or damage. Replace worn tires promptly to ensure safe riding.
6.4 Brake System Check
Periodically check the responsiveness of both the electric and disc brakes. Ensure brake levers are not loose and brake pads are not excessively worn. Adjust or replace components as needed.
6.5 General Inspection
Before each ride, perform a quick check:
- Ensure all screws and fasteners are tight.
- Check for any loose parts or unusual noises.
- Verify that the folding mechanism is securely locked.
- Inspect the frame for any cracks or damage.
7. Troubleshooting
If you encounter issues with your KUGOO M3 PRO, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Loose connections; Faulty power button | Charge the battery; Check all cable connections; Contact support if button is faulty. |
| Reduced range or power | Under-inflated tires; Low battery charge; Overload; Extreme temperatures | Inflate tires to 50 PSI; Fully charge battery; Reduce load; Avoid riding in extreme cold. |
| Brakes not responsive | Worn brake pads; Loose brake cables; Air in hydraulic system (if applicable) | Inspect and replace brake pads; Adjust brake cable tension; Seek professional service. |
| Unusual noises during ride | Loose components; Bearing issues; Debris in wheels | Inspect and tighten all fasteners; Clean wheels; Contact support if bearings are faulty. |
| NFC unlocking not working | Incorrect card placement; Damaged NFC card; System error | Ensure correct placement over reader; Try another NFC card; Restart scooter. |
8. Specifications
| Category | Specification |
|---|---|
| General | Brand: KUGOO Model: M3 PRO Color: Black & Yellow Certification: CE |
| Dimensions & Weight | Unfolded Size: 1310 x 655 x 1310 mm Folded Size: 1310 x 280 x 525 mm Net Weight (N.W.): 26.2 kg Length of Handlebar (Unfolded): 655 mm Length of Handlebar (Folded): 280 mm Footboard Top to Ground: 230 mm Footboard Bottom to Ground: 165 mm Size of Footboard: 490 x 190 mm Package Size: 1345 × 300 × 595 mm Gross Weight (G.W.): 30.5 kg |
| Performance | Max Load: 120 kg Recommended Rider Heights: 150-200 cm Uphill: 12°/21% Max Range: 64 km Max Speed: 46 km/h Speed Modes: 22/35/46 km/h (Eco/Sport/Race) |
| Motor | Type: One-piece Hub Motor Power: 600W Rated Power & Voltage: 600W, 48V Peak Power: 773W Max RPM: 1000rpm Max Output Torque: 22N.M |
| Battery | Capacity & Voltage: 13Ah, 48V Power Capacity: 624Wh Charging Time: 9h (By One Charger) Protection System: Yes Waterproof Level: IP65 |
| Charger | Input: 100-240V Output: 54.6V, 1.5A |
| Tires | Size: 10" x 2.5" Type: Pneumatic, Rubber Tire Best Tire Pressure: 50 PSI |
| Braking System | Electric Brake + Front and Rear Disc Brakes Brake Disc: 140 mm (Outside Diameter) |
| Suspension | Spring Suspension (Front and Rear) |
| Display | Type: LED NFC: Yes (for unlocking) |
| Material | Frame: Aluminium Alloy |
| Waterproof Level | IP54 (Scooter), IP65 (Battery) |
9. User Tips
- Pre-Ride Check: Always perform a quick safety check before each ride, including brakes, tires, and folding mechanism.
- Tire Pressure: Maintaining the recommended 50 PSI tire pressure is crucial for both ride comfort and battery range.
- Battery Longevity: Avoid fully discharging the battery and try to charge it regularly to prolong its lifespan.
- Visibility: Utilize the integrated LED lighting system, especially at dusk or night, to enhance your visibility to others.
- Smooth Acceleration: For a smoother ride and better battery efficiency, accelerate gradually rather than abruptly.
- Folding for Transport: When folding the scooter for transport, ensure all locking mechanisms are engaged to prevent accidental unfolding.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.
