Retekess TR643

Contents

Retekess TR643 Record Player User Manual

Model: TR643

Brand: Retekess

1. Introduction

Welcome to the world of vinyl with your new Retekess TR643 Record Player. This manual provides detailed instructions for setting up, operating, and maintaining your turntable to ensure years of enjoyable listening. Please read this manual thoroughly before using the product.

Retekess TR643 Record Player with dust cover
Retekess TR643 Record Player with dust cover.

2. Package Contents

Upon opening the package, you should find the following items:

  • TR643 Retro Bluetooth Phonograph (Turntable) x1
  • Product Manual x1
  • Power Cable x1
  • AUDIO OUT Cable (RCA) x1
  • AUX IN Cable x1
  • Counterweight x1
  • Platter Mat x1
  • 45 RPM Adapter x1
Image showing all items included in the Retekess TR643 package: turntable, product manual, power cable, audio out cable, AUX in cable, and packaging box.
All items included in the TR643 package.

3. Product Features

  • Three-Speed Precision Drive: Supports 33⅓, 45, and 78 RPM for full-format vinyl playback.
  • High-Resolution Moving Magnet Cartridge: Professional-grade Audio-Technica ATN3600L stylus for rich detail and record protection.
  • Dual Connection Modes: Bluetooth wireless transmission and RCA wired output for versatile audio setups.
  • Wireless Listening: Stream vinyl sound without tangled cables within a 10m range.
  • AUX Input Mode: Connect external devices like phones or tablets via the AUX interface.
  • Headphone Jack: Standard 3.5mm headphone port for private listening.
  • Auto-Stop Playback: Automatically stops when playback ends to protect your vinyl and stylus.
  • Tonearm Lift Lever: Soft-release lever for stable and controlled tonearm descent, preventing damage.
  • Easy-to-Press Buttons: Intuitive control panel for speed selection, function switching, and Bluetooth pairing.
Close-up of the moving magnet cartridge and stylus on a vinyl record, highlighting crisp sound and precision crafting.
Crisp Sound, Precision Crafted: Moving magnet cartridge for rich, warm analog sound.
Image illustrating the auto-stop playback feature, showing a record player with a play/pause icon and an 'A' indicating automatic stop.
Auto-Stop Playback: Automatically stops to protect your vinyl and stylus.

4. Setup Guide

4.1 Initial Placement and Power Connection

  1. Ensure the phonograph is on a flat, stable surface to avoid vibrations.
  2. Plug the included 12V/2A adapter into the '12V DC IN' port on the back of the turntable and then into a power source.
Six-step visual guide on how to play music with the TR643 record player, including placement, power, record/stylus check, power/volume, tonearm lowering, and tonearm return.
Visual guide for playing music with TR643.

4.2 Counterweight Adjustment

The counterweight adjusts the pressure of the stylus. Incorrect pressure can lead to distorted sound or skipping. The optimal pressure is 2.5G.

  1. Move the tonearm clip from left to right to release the tonearm.
  2. Carefully move the tonearm slightly to the left from its rest.
  3. Rotate the counterweight forwards or backwards until the tonearm is balanced horizontally.
  4. Once balanced, hold the yellow rear part of the counterweight and rotate the white numbered ring until the '0' mark aligns with the 12 o'clock position. Ensure the counterweight itself does not rotate during this step.
  5. Finally, from the '0' reference position, hold both the yellow rear part and the white numbered ring of the counterweight. Rotate the counterweight counter-clockwise until the '2.5' mark on the dial aligns with the 12 o'clock position.

Note: Always adjust the counterweight before playing records to ensure optimal sound and prevent damage to your records and stylus.

5. Operating Instructions

5.1 Playing Vinyl Records

  1. Place the platter mat on the turntable platter.
  2. Place a vinyl record on the platter, aligning the center hole with the platter spindle.
  3. Select the appropriate playback speed (33⅓, 45, or 78 RPM) using the speed selector switch located near the tonearm. For 45 RPM records, use the included 45 RPM adapter if necessary.
  4. Turn the Power/Volume knob clockwise to power on the turntable and adjust the volume.
  5. Gently lift the tonearm using the lift lever and move it to the desired starting position on the record.
  6. Lower the tonearm using the lift lever to begin playback.
  7. When the record finishes, the auto-stop function will stop the platter rotation. Gently lift the tonearm and return it to its rest, securing it with the tonearm clip.

Note: The turntable automatically enters record playback mode upon power-on. To switch from other modes to record playback, press the 'FUNC' button repeatedly until the correct mode is selected.

Close-up of the 3-speed selector knob and different vinyl record types (33 1/3, 45, 78 RPM).
3-Speed Turntable for All Vinyls: Easy speed selector knob supports 33⅓, 45, and 78 RPM speeds.

5.2 Bluetooth Mode (Receiving Audio)

  1. Press the 'FUNC' button to switch to Bluetooth mode. The blue Bluetooth indicator light will start flashing, indicating the turntable is in pairing mode.
  2. On your external device (e.g., smartphone, tablet), enable Bluetooth and search for available devices.
  3. Select "PLAY PRO" from the list of devices to pair. If prompted for a password, enter "0000" or "1234".
  4. Once connected, the blue Bluetooth indicator light will turn solid.
  5. Start playing music on your external device.
  6. To disconnect, short press the Mute/Pairing button until the blue indicator light starts flashing again.

Note: The effective operating distance for Bluetooth is within 10 meters. Switching to another mode will disconnect Bluetooth. When returning to Bluetooth mode, the turntable will automatically attempt to reconnect to the last paired device.

Image showing a person listening to a record player wirelessly with a 10m range indicator.
Wireless Freedom: Stream vinyl sound without tangled cables within a 10m range.

5.3 Bluetooth Transmission (Sending Audio)

The TR643 can also transmit audio to external Bluetooth speakers or headphones.

  1. Ensure your external Bluetooth speaker/headphone is in pairing mode.
  2. In Vinyl or AUX mode, long press the 'FUNC' button. The red LED will turn off, and the blue LED will slow flash, indicating transmission pairing mode.
  3. Once connected, the blue LED will turn off, and a voice prompt "Bluetooth transmission connected" will be heard. The red LED will turn solid.

Note: Bluetooth transmission and RCA connection cannot be used simultaneously.

5.4 AUX Input Mode

  1. Connect one end of an AUX cable (not included) to the 'AUX IN' socket on the back of the turntable.
  2. Connect the other end to the audio output port of your external device (e.g., phone, tablet).
  3. Press the 'FUNC' button to switch the turntable to AUX mode.
  4. Start playing audio from your external device.

Note: If an AUX cable is inserted while in Vinyl or Bluetooth mode, the turntable will continue in its current mode, and AUX input will not function. You must explicitly switch to AUX mode.

Image showing a smartphone connected to the AUX IN port of the record player, illustrating AUX Input Mode.
AUX Input Mode: Route audio from your phone or tablet through the player via AUX.

5.5 Headphone Output

  1. Before inserting headphones, turn the turntable's volume to the minimum to prevent hearing damage.
  2. Plug your headphones (not included) into the 3.5mm headphone jack on the back of the turntable.
  3. Adjust the volume to your preference.

Note: When headphones are plugged in, the turntable's built-in speakers will be muted. The Mute/Pairing button only affects the turntable's speakers, not headphone volume.

Image showing a person wearing headphones connected to the record player, illustrating private listening.
Plug In and Enjoy Quiet Moments: Standard 3.5mm headphone port for direct listening.

5.6 RCA Stereo Output

Connect your turntable to external speakers or an amplifier for enhanced audio.

  1. Ensure the turntable's volume is set to minimum before connecting.
  2. Connect the red and white RCA plugs of the AUDIO OUT cable to the corresponding 'LINE OUT' sockets on the back of the turntable.
  3. Connect the other end of the RCA cable to the input of your amplifier or powered speakers.
  4. Adjust the volume on your external audio system.

Note: Ensure correct color-matching (red to red, white to white). Wireless (Bluetooth transmission) and RCA output cannot be used simultaneously.

Close-up of the rear panel of the record player showing LINE OUT (RCA) and AUX IN ports.
RCA Output for Stereo Sound: Connect to external speakers via RCA output.
Video demonstrating the setup and basic operation of the Retekess TR643 Record Player, including power connection, volume adjustment, tonearm handling, speed selection, and Bluetooth pairing.

6. Maintenance

Proper care will extend the life of your record player and vinyl collection.

  • Do not leave vinyl records on the turntable after use. Always return them to their original packaging.
  • After each use, return the tonearm to its rest and secure it with the tonearm lock.
  • Unplug the power cable and any other connected cables when the turntable is not in use for extended periods.
  • The stylus is delicate; handle it with extreme care to avoid damage.
  • Clean the dust cover and turntable surface with a soft, dry cloth. Avoid harsh chemicals.
  • Regularly clean your records with a dedicated vinyl cleaning brush to remove dust and static.
Close-up of the cartridge and stylus, emphasizing its precision and delicate nature.
Cartridge and Stylus: Featuring a specially polished, high-grade diamond tip for precise sound reproduction.

7. Troubleshooting

Common Issues and Solutions:

  • No Power: Ensure the power adapter is securely connected to both the turntable and a working power outlet. Check if the Power/Volume knob is turned ON.
  • No Sound:
    • Vinyl Playback: Ensure the volume is turned up. If using external speakers, check their power and connections.
    • Bluetooth: Ensure the turntable is in Bluetooth receiving mode (blue light solid) and correctly paired with your device. Check volume on both turntable and external device.
    • AUX Input: Ensure the turntable is in AUX mode and the AUX cable is securely connected to both devices. Check volume on both turntable and external device.
    • Headphones: Ensure headphones are fully plugged in and volume is adjusted.
  • Skipping Records: Adjust the counterweight to the optimal 2.5G pressure. Ensure the turntable is on a stable, level surface. Clean the record and stylus.
  • Bluetooth Pairing Issues: Ensure the turntable is in Bluetooth pairing mode (blue light flashing). Try forgetting "PLAY PRO" on your device and re-pairing. Ensure you are within the 10-meter operating range.
  • Turntable Not Spinning: Ensure the turntable is in record playback mode.
  • Bluetooth Transmission Not Working: Ensure the turntable is in Vinyl or AUX mode before long-pressing FUNC to initiate transmission. Ensure the receiving Bluetooth device is in pairing mode.

8. Specifications

CategorySpecification
Model NumberTR643
Brand NameRetekess
MaterialABS + Wood
Turntable MaterialPlastic
Power SourceDC
Power InputDC-in 12V/0.25A
Power Consumption10W
MotorDC servo motor
Drive SystemBelt drive
Speeds33⅓, 45, 78 RPM
Cartridge (Cherry Caddy)Audio-Technica ATN3600L
Cartridge TypeMoving Magnetic
S/N Ratio55DB (AUX-IN)
Output ConnectorsRCA
RCA Output200-280MV (5 CM/SEC AT KHZ)
Headphone Jack3.5MM
Bluetooth VersionV5.1
Bluetooth Transmission Range10 M
Bluetooth ConfigurationA2DP, AVRCP
Operating Temperature-20°C ~ 55°C / -4°F ~ 104°F
Dimensions (W x D x H)407mm x 337mm x 119mm
Weight3.5KG
DC Cable Length1M
Voltage RangeHigh voltage (50-1000V DC, 75-1000V AC)
Inbox AdaptorYes
CertificationCE, FCC

Note: The TR643 is compatible with 220V power supplies (UK, EU, AU versions available).

9. User Tips

  • For the best sound quality, ensure your turntable is placed on a perfectly level and stable surface to minimize vibrations.
  • Always handle records by their edges to avoid leaving fingerprints, which can affect playback quality.
  • Regularly clean your stylus with a soft brush designed for turntable styli to remove dust and debris.
  • When connecting to external speakers via RCA, remember that wireless (Bluetooth transmission) and RCA output cannot be used simultaneously. Choose your preferred connection method before playback.
  • If you experience skipping, double-check your counterweight adjustment. The recommended optimal pressure is 2.5G.

10. Warranty and Support

Your Retekess TR643 Record Player comes with the following:

  • 1-Year Warranty: Covers any manufacturing defects.
  • 30-Day No-Reason Return: If you are not completely satisfied with your purchase.

For further assistance or inquiries, please refer to the official Retekess support channels.

A detailed user manual in PDF format is available for download: Retekess TR643 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.