1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your VEVOR UV Flatbed Printer. This versatile printer is designed for high-resolution printing on a wide range of materials, including plastics, metals, glass, ceramics, wood, and stone, making it suitable for various applications such as phone cases, bottles, and promotional items.
Please read this manual thoroughly before operating the printer and keep it for future reference.
2. Safety Instructions
- Always operate the printer in a well-ventilated area to avoid inhaling ink fumes.
- Wear appropriate personal protective equipment (PPE), such as gloves and safety glasses, when handling UV inks.
- Avoid direct exposure to the UV lamp. The printer is equipped with safety features, but exercise caution.
- Ensure the printer is connected to a grounded power outlet with the correct voltage (AC100-230V).
- Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.
- Keep children and pets away from the printer during operation.
- In case of emergency, immediately disconnect the power supply.
3. Product Overview
The VEVOR UV Flatbed Printer is a robust and efficient printing solution. It features an intuitive design for ease of use and high-quality output.
3.1 Main Components
- Ink Placement: Area for ink cartridges or CISS system.
- Detection Window: For monitoring internal processes.
- Coolant Filling Position: For the water-cooled UV lamp system.
- Infrared Ray Height Inductor: Automatically measures product height to prevent nozzle impact.
- Touch Screen: User interface for controlling printer functions.
- Printing Platform: Area for placing items to be printed.
- Control Panel: Buttons for power, ink, and paper feed.
3.2 Key Features
- Infrared Automatic Height Measurement: Protects the print head by automatically adjusting to the product height (up to 12cm, printing distance 3mm).
- High-Resolution Printing: Achieves up to 2880*1440 DPI for clear and detailed prints.
- Fast and Efficient Production: High-speed printing technology for improved productivity.
- Easy-to-Use Interface: Simple, one-click operation via touch screen, no complex settings required.
- Multiple Printing Modes: Supports flat printing and 3D printing. Rotary printing is available on some models.
- Versatile Material Compatibility: Prints on plastics, metals, glass, ceramics, wood, stone, and more.
4. Setup
4.1 Unpacking and Placement
- Carefully remove the printer and all accessories from the packaging.
- Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources.
- Ensure there is enough space around the printer for operation and maintenance.
4.2 Connecting Power and USB
- Connect the power cable to the printer and then to a grounded electrical outlet.
- Connect the USB cable from the printer to your computer.
4.3 Software Installation
- Insert the provided U disk (or download from the official website) containing the AcroRIP software and drivers.
- Follow the on-screen instructions to install the printer drivers and AcroRIP software on your Windows operating system (Apple software is not supported).
- Ensure the software is correctly installed and activated using the provided dongle, if applicable.
4.4 Ink System Setup (CISS)
- Carefully fill the CISS (Continuous Ink Supply System) ink tanks with the appropriate UV inks (six colors: C, M, Y, K, W, W).
- Follow the specific instructions in the software or a dedicated ink setup guide to prime the ink system and ensure ink flows correctly to the print head.
- Ensure the ink sacs are properly installed.
4.5 Loading Media
- Place the item to be printed onto the printing platform.
- For rotary printing (if your model supports it), install the bottle holder and secure the cylindrical object.
- Use the infrared height measurement feature to automatically adjust the platform height, ensuring optimal printing distance.
5. Operating Instructions
5.1 Power On/Off
- To power on, press the green power button on the control panel.
- To power off, press and hold the power button until the printer shuts down, or use the software's shutdown function.
5.2 Preparing a Print Job
- Open the AcroRIP software on your computer.
- Load your image file (TIFF, BMP, PDF, EPS, JPEG, JPG, etc.).
- Adjust print settings such as resolution, color configuration (e.g., simultaneous white and chromatic color input), and print mode (flat or 3D).
- Position the image on the virtual print bed to match the physical placement of your item.
5.3 Starting a Print
- Once all settings are configured and the item is correctly placed on the platform, initiate the print job from the AcroRIP software.
- The printer will automatically adjust the height and begin printing.
- Monitor the printing process to ensure proper ink flow and print quality.
6. Maintenance
6.1 Regular Cleaning
- Use a non-dust cloth to regularly clean the printer's exterior and printing platform.
- Clean the print head and nozzle area using recommended cleaning solutions and procedures to prevent clogging. The printer has an intelligent infrared collision system and ink pad preservative solution to help prevent clogging.
- Ensure the UV lamp and its cooling system (water-cooled + air-cooled) are free from dust and debris for optimal performance and longevity.
6.2 Ink System Maintenance
- Monitor ink levels regularly and refill tanks before they run completely dry to prevent air bubbles in the system.
- Perform nozzle checks and head cleaning cycles through the software as needed to maintain print quality.
7. Troubleshooting
This section addresses common issues you might encounter. For more complex problems, please contact VEVOR customer support.
7.1 Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor print quality (streaks, missing colors) | Clogged nozzles, low ink levels, incorrect print settings. | Perform a nozzle check and head cleaning. Refill ink tanks. Verify print settings in AcroRIP. |
| Printer not recognized by computer | Loose USB connection, driver issues, printer not powered on. | Check USB cable and connections. Reinstall printer drivers. Ensure printer is powered on. |
| Ink not curing properly | UV lamp issue, incorrect ink type, print speed too fast. | Check UV lamp operation. Ensure correct UV ink is used. Reduce print speed. |
| Printer not feeding material | Material obstruction, incorrect platform height, sensor issue. | Clear any obstructions. Re-adjust platform height using infrared sensor. |
8. Specifications
8.1 A4 UV Printer Specifications
| Feature | Specification |
|---|---|
| Working Voltage | 110V / 220V |
| Power | 90W |
| Usable Ink Type | LED UV ink |
| Print Thickness | 0-50mm (0-2") |
| Printing Speed | 4*6 inches/12s |
| Printing Height | 2" (50mm) |
| Max Printing Size | 6.5"*12" (165*300mm) |
| Language | English, Chinese |
| Connection | USB 2.0 port |
| Working Condition | 68~86°F (20-30℃), humidity 40%-70% |
| Ink System | CISS System, easy for refilling |
| Print Technology | Non-touch piezoelectric type inkjet printing |
| Operation System | Windows 7-10 |
| Software | AcroRip 10.3 |
| Image Format | TIFF (RGB&CMYK), BMP, PDF, EPS, JPEG, JPG, etc |
| Gross Weight | 34kg (74.8lbs) |
| Package Dimensions | 750*560*520mm (30"*22"*20") |
8.2 A3 UV Printer Specifications (Variant)
| Feature | Specification |
|---|---|
| Sprinkler Head | ESPON L805 (6*90 nozzles) |
| Print Size | A3 320*500mm |
| Vacuum Platform Size | Width 330*Length 500mm |
| Max Descendible Height | 150mm (electric platform) |
| Cylinder Diameter | 50-110mm |
| Cylinder Length | ≤ 320mm (Small diameter rotary printing not supported) |
| Printer Dimensions | Length 838mm * Width 630mm * Height 518mm |
| Net Weight | 51kg |
| Gross Weight (incl. wooden case) | 68kg |
| Driver | Epson L1800 |
| Software | Rip 10.3 |
9. User Tips
- For best results, always perform a test print on a similar material before printing on your final product.
- Keep your workspace clean and free of dust to prevent contamination of the print head and materials.
- Regularly update your printer drivers and AcroRIP software to ensure compatibility and access to the latest features.
- When printing on dark materials, ensure sufficient white ink is applied as a base layer for vibrant colors.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact VEVOR customer service directly. Keep your purchase receipt and product serial number handy when contacting support.