1. Introduction
Thank you for choosing the TYT UVL-15W Dual Band Two Way Radio. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.
2. Safety Information
To ensure safe operation, always follow these guidelines:
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not transmit without an antenna attached.
- Keep the radio away from medical devices, as it may interfere with their operation.
- Use only TYT-approved batteries and chargers.
- Avoid exposing the radio to direct sunlight for extended periods or to extreme temperatures.
- Do not attempt to disassemble or modify the radio. Servicing should only be performed by qualified technicians.
- Maintain a safe distance from the antenna during transmission to avoid RF exposure.
3. Product Overview
The TYT UVL-15W is a rugged, high-power dual-band two-way radio designed for long-range communication. It features a 2.4-inch dot-matrix LCD display and supports various advanced functions.
Key Features:
- High Output Power: 15W (Hi) / 5W (Low)
- Dual Band, Dual Display, Dual Standby (V+V, U+U, V+U)
- AM Receive: 108-136MHz
- FM Radio: 64-108MHz (24 storage channels)
- AI Noise Cancellation
- Bluetooth Functionality (Optional)
- GPS (including location information and map) (Optional)
- Cross-band Repeater Function
- Scan Frequency and CTCSS/DTCS Scan
- 1000 Channel Capacity
- DTMF, 2 Tone/5 Tone
- VOX/VOX, Compandor, Scrambler, TOT
- 1750 Tone
- IPx4 Water Resistance Level
- 12-month Warranty
Visual Guide:
Product Video:
4. Setup
- Battery Installation and Charging:
The UVL-15W uses a 3500-4000mAh battery. Connect the provided Type-C charger to the radio's Type-C port (if available on your model) or use the charging cradle. Ensure the battery is fully charged before first use. - Antenna Attachment:
Screw the antenna clockwise onto the antenna connector on top of the radio until it is finger-tight. Do not overtighten. - Powering On/Off:
Rotate the power/volume knob clockwise to turn on the radio. Continue rotating to adjust the volume. To turn off, rotate the knob counter-clockwise until it clicks. - Initial Check:
Upon powering on, the display will show the model name and firmware version (e.g., "TYT UVL-15W Firmware Version: 2.07.04").
5. Operating Instructions
Basic Operation:
- Channel/Frequency Selection: Use the up/down arrow keys or the rotary knob to navigate through channels or adjust frequencies in VFO mode.
- Volume Adjustment: Rotate the power/volume knob to increase or decrease the audio output.
- Transmitting: Press and hold the Push-to-Talk (PTT) button on the side of the radio to transmit. Release it to receive.
Advanced Features:
- Dual Band / Dual Receiver: The radio can monitor two frequencies simultaneously (VHF-VHF, UHF-UHF, or VHF-UHF). Use the A/B button to switch the primary operating frequency.
- AM Receive (108-136MHz): Access this mode to listen to aviation band communications. Refer to the full user manual for specific steps to enable AM receive.
- Cross-band Repeater: This function allows the radio to act as a temporary repeater, retransmitting signals received on one band to another. Configuration details are in the advanced settings.
- AI Noise Cancellation: Activate this feature to reduce background noise during transmission and reception, improving audio clarity.
- Bluetooth Function (Optional): If your model includes Bluetooth, pair with compatible Bluetooth earphones or PTT devices for hands-free operation.
- GPS (Optional): Models with GPS can display location information and maps on the screen.
- Scanning: The radio supports frequency scanning and CTCSS/DTCS tone scanning to find active channels or tones.
- 1750 Tone: Used for accessing repeaters that require a 1750Hz burst tone.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: Avoid fully discharging the battery frequently. Charge the battery in a well-ventilated area. If storing the radio for a long period, remove the battery and store it separately in a cool, dry place.
- Antenna: Regularly check the antenna for damage. A damaged antenna can reduce performance and potentially damage the radio.
- Storage: Store the radio in a dry, dust-free environment when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio won't turn on | Low or dead battery | Charge or replace the battery. |
| No reception or poor audio | Incorrect frequency/channel; Antenna loose or damaged; Out of range | Verify frequency/channel settings. Check antenna connection. Move closer to other radios or repeater. |
| Cannot transmit | PTT button not pressed correctly; Frequency busy; TX power too low | Ensure PTT is fully pressed. Wait for the channel to clear. Increase TX power setting. |
| Display is blank or frozen | Software error; Battery issue | Remove and reinsert the battery to reset. If problem persists, contact support. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | UVL-15W |
| Output Power | 15W (Hi), 5W (Low) |
| Storage Channels | 1000 channels |
| Talk Range | 5-15 KM |
| Frequency Range | VHF & UHF |
| Battery Capacity | 3500-4000mAh |
| Operating Language | English |
| Water Resistance Level | IPx4 |
| Communication Type | Wireless |
| Certification | CE |
| Dimensions | 20 x 15 x 9 cm (approximate) |
| Working Voltage | 7.4VDC |
| Working Temperature | -20°C ~ +50°C |
| Weight (incl. battery & antenna) | 250g |
9. User Tips
- For optimal range, ensure your antenna is securely attached and unobstructed.
- Experiment with different power settings (Hi/Low) to conserve battery life when high power is not necessary.
- Familiarize yourself with the programmable function buttons to quickly access frequently used features.
- When using optional Bluetooth accessories, ensure they are fully charged and properly paired for reliable communication.
- Regularly check for firmware updates from the manufacturer to ensure optimal performance and access to new features.
10. Warranty and Support
The TYT UVL-15W Two Way Radio comes with a 12-month warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For technical support, warranty claims, or service inquiries, please contact your original point of purchase or refer to the official TYT website for authorized service centers and contact information.
