Lishui Controller LSW06-MINIAFSB-U

Contents

Electric Bicycle Brushless Motor Controller

Model: LSW06-MINIAFSB-U

Manufactured by Lishui Controller

1. Introduction

This manual provides essential information for the safe and efficient use of your Lishui Controller LSW06-MINIAFSB-U brushless motor controller. This controller is designed for electric bicycles, electric scooters, fat bikes, and MTBs, offering reliable power management and signal processing for your e-bike system.

Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

2. Safety Information

  • Always disconnect power before installing or performing maintenance on the controller.
  • Ensure all connections are secure and properly insulated to prevent short circuits.
  • Avoid exposing the controller to water or extreme temperatures.
  • Do not attempt to open or modify the controller, as this may void the warranty and cause damage.
  • If you are unsure about any installation steps, consult a qualified technician.

3. Package Contents

The package typically includes:

  • 1 x Lishui Controller LSW06-MINIAFSB-U Brushless Motor Controller
  • Integrated wiring harness with various connectors
Lishui Controller LSW06-MINIAFSB-U with integrated wiring harness

Image: Lishui Controller LSW06-MINIAFSB-U with its integrated wiring harness.

4. Specifications

Feature Specification
Model LSW06-MINIAFSB-U
Type Brushless Motor Controller
Rated Voltage (Vrated) 36V
Rated Current (Irated) 7A
Maximum Current (Imax) 15A
Voltage Cutoff (Vcutoff) 31V
Dimensions (L x W x H) 86mm x 40mm x 25mm
Weight 243g
Control Type Sine Wave (Common for Lishui controllers)
Certifications IPX5, EN ISO 13849-1:2015, UL Certified (Applicable to various Lishui controllers)

Note: PCB and shell size may be updated regularly. All products could have a dimensional tolerance of 2 millimeter. Please consult Lishui Sales team for more detail.

Close-up of controller label showing specifications

Image: Controller label with detailed specifications including model number, voltage, and current ratings.

Controller dimensions: 86mm length, 40mm width, 25mm height

Image: Diagram illustrating the physical dimensions of the controller.

5. Setup and Installation

Proper installation is crucial for the controller's performance and safety. Follow these steps carefully:

  1. **Verify Model Compatibility**: Before installation, ensure the controller's model number (LSW06-MINIAFSB-U) and firmware (e.g., LSW1538-04-15EA) are compatible with your e-bike system. Incompatible protocols can lead to errors and non-functionality.
  2. **Identify Connectors**: Refer to the diagram below to identify each connector on the controller's wiring harness.
  3. **Power Supply (1)**: Connect the main power cables to your e-bike's battery. Ensure correct polarity (red to positive, black to negative).
  4. **E-bike Main Cable (2)**: Connect this to the main wiring harness of your e-bike, which typically includes connections for the display, throttle, and other components.
  5. **Headlight (3)**: Connect your e-bike's headlight to this connector.
  6. **Communication Signal Interface (4)**: This connector handles communication signals, often for the display or other smart components.
  7. **Sensor (5)**: Connect any additional sensors your system may use, such as brake sensors.
  8. **Motor/Motor Hall/Speed Sensor Signal (6)**: Connect the motor's main power and hall sensor wires to this connector. Ensure all motor phase wires (usually green, blue, yellow) and hall sensor wires are correctly matched.
  9. **Secure Connections**: Double-check all connections to ensure they are firm and properly insulated. Avoid loose wires that could short circuit or disconnect during operation.
  10. **Mounting**: Securely mount the controller in a protected area on your e-bike, away from direct impact, water, and excessive heat.
Controller with labeled connectors: 1 Power supply, 2 E-bike Main Cable, 3 Headlight, 4 Communication Signal Interface, 5 Sensor, 6 Motor/Motor Hall/Speed Sensor Signal

Image: Diagram showing the various connectors on the controller and their functions.

Video: Visual guide demonstrating the controller and its connections.

6. Operating Instructions

Once the controller is correctly installed and all connections are secure, you can operate your e-bike system:

  • **Power On/Off**: Use your e-bike's main power switch or display unit to turn the system on or off.
  • **Throttle Control**: If your e-bike is equipped with a throttle, gently twist or press it to engage motor assistance.
  • **Pedal Assist System (PAS)**: For e-bikes with PAS, the motor will provide assistance based on your pedaling input and the selected assist level on your display.
  • **Display Interaction**: Your e-bike's display unit will show information such as speed, battery level, assist level, and potentially error codes. Refer to your display's manual for specific operations.
  • **Headlight Control**: The headlight can typically be controlled via the e-bike's display or a dedicated switch.

Lishui controllers support advanced features like Hall-Sensorless Motor Technology for smooth zero-start and Interior Permanent Magnet Synchronous Motor (IPMSM) for high efficiency and wider speed range, depending on your e-bike's motor configuration.

7. Maintenance

  • **Keep Dry**: Ensure the controller remains dry and protected from moisture.
  • **Inspect Connections**: Periodically check all electrical connections for tightness and signs of wear or corrosion.
  • **Cleanliness**: Keep the controller free from dirt, dust, and debris. Use a soft, dry cloth for cleaning.
  • **Avoid Overheating**: Ensure the controller has adequate ventilation and is not covered, especially during prolonged use.
  • **Software Updates**: If your system supports it, check for firmware updates from your e-bike manufacturer or Lishui Controller for improved performance and features.

8. Troubleshooting

If you encounter issues with your controller, consider the following:

  • **Controller Not Responding**: Check all power connections, including the battery and main e-bike cable. Ensure the battery is charged.
  • **Error Codes on Display**: If your display shows an error code, consult your e-bike's display manual for the meaning of the code. Common issues include motor hall sensor errors, throttle errors, or communication errors.
  • **Motor Not Engaging**: Verify that the throttle or PAS is correctly connected and functioning. Check motor phase and hall sensor connections.
  • **Incompatible Protocols**: If the controller is not working properly after installation, especially if it's a replacement, verify that its firmware protocol (e.g., LSW1538-04-15EA) is compatible with your e-bike's existing components (display, motor, sensors). Incompatible protocols are a common cause of non-functionality.
  • **Loose Connections**: Re-check all wiring connections as loose contacts can cause intermittent issues or complete failure.

If problems persist, contact your e-bike manufacturer or Lishui Controller support for assistance.

9. User Tips

  • **Firmware Matching**: Always confirm the exact model and firmware version of your existing controller before purchasing a replacement. Sending photos of your controller's label and connectors to customer service can help ensure you receive a compatible unit.
  • **Customization Software**: Lishui Controller offers customization software for EPAC controllers, allowing users to easily change programs to match different parameters of their e-bike components (pedal, display, torque sensor, motors). This can be a valuable tool for fine-tuning your e-bike's performance.
  • **IoT Module & App**: Consider integrating Lishui's IoT module and app for advanced features like speed/range monitoring, battery capacity display, light control, PAS level adjustment, GPS tracking, and riding activity records.

10. Warranty and Support

For warranty information, technical support, or to inquire about specific compatibility details, please contact Lishui Controller directly or refer to their official website. Lishui Controller has a dedicated R&D team and offers active pre-sales service and quick response after-sales support.

You can find more information and contact details on the official Lishui Controller website: www.lsdzs.com

A user manual in PDF format is also available for download from the manufacturer's website, which may contain more detailed instructions and diagrams.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.