MOBAPAD CHITU 2 Bluetooth Controller User Manual

1. Introduction

Thank you for choosing the MOBAPAD CHITU 2 Bluetooth Controller. This manual provides detailed instructions on how to set up, operate, and maintain your new wireless gamepad. The CHITU 2 controller is designed for a versatile gaming experience across multiple platforms, including Nintendo Switch, PC, Android, and iOS devices.

For a comprehensive guide, you may also refer to the official user manual PDF: MOBAPAD CHITU 2 User Manual (PDF)

2. Product Layout

Familiarize yourself with the various buttons and components of your MOBAPAD CHITU 2 controller.

Figure 2.1: Front view of the MOBAPAD CHITU 2 Controller, highlighting key features like TMR Glide Sticks and Silent D-pad.

Figure 2.2: Ergonomic design of the controller in use.

2.1 Button and Port Identification

1. Minus Button (-)
2. Left Joystick
3. Screenshot Button
4. D-pad
5. Setting Button (Gear icon)
6. Custom Button (M icon)
7. LOGO Light
8. USB-C Charging Port
9. Plus Button (+)
10. ABXY Buttons
11. Home Button
12. Right Joystick
13. R Button (Right Shoulder)
14. L Button (Left Shoulder)
15. ZR Button (Right Trigger)
16. ZL Button (Left Trigger)
17. Mode Switch (on the back, labeled NS / Android/iOS/PC)
18. GR Button (Rear Right Paddle)
19. GL Button (Rear Left Paddle)
20. Reset Hole
21. Charging Contacts

Figure 2.3: Internal structure of the TMR Glide Stick, showing the inverted snap-fit joystick and LSR track.

Figure 2.4: Cross-section of Microswitch Triggers (0.7±mm response) and Shoulder Buttons (tactile switch).

3. Basic Functions

3.1 General Operations

• Power On: Slide the mode switch to the corresponding platform position (NS or Android/iOS/PC) and briefly press the HOME button.
• Power Off: Slide the mode switch to the OFF position.
• Pair: Briefly press the Home button to power on, then press and hold the Home button for 3 seconds to initiate pairing mode.
• Standby: If the controller remains idle for 10 minutes while connected, it will automatically power off.
• Wake Up: Short-press the Home button to wake up the controller.
• Low Battery: When the battery level is below 15%, the LOGO light will flash rapidly as a reminder.
• Charging:
  • When charging while powered off, the LOGO light will stay solid red and turn off when fully charged.
  • When charging while powered on, the LOGO light will flash twice quickly and then return to the current lighting effect.

3.2 Connection Status Indicators

4. Connection Instructions

4.1 Nintendo Switch Connection

Bluetooth Connection

1. On the Switch home screen, tap the "Controllers" icon and select "Change Grip/Order".
2. While the controller is powered off, slide the mode switch to the "NS" position. Briefly press the "Home" button to power on, then press and hold the "Home" button for 3 seconds. The LOGO light will flash rapidly, indicating it is in pairing mode.
3. Once the LOGO light stays solid, press the "B" button to return to the home screen.

Reconnect and Wake Up (Switch)

After a successful connection, if the Switch enters sleep mode, press the "Home" button on the controller (with the mode switch in the "NS" position) to reconnect and wake up the console.

Wired Connection (Switch)

*Before using a wired connection, ensure the controller is powered on or in sleep mode and enable the Pro Controller's wired connection in Switch settings.

1. While the controller is powered off, slide the mode switch to the "NS" position.
2. Use a USB-C cable to connect the controller to the Switch dock.
3. The LOGO light on the controller will stay solid, indicating a successful connection.

4.2 PC Connection

Bluetooth Connection (Xbox Mode)

1. Power off the controller and slide the mode switch to the "Android/iOS/PC" position.
2. Press Home to power on, then hold Home for 3 seconds to enter pairing mode.
3. On your PC, go to Bluetooth settings and select "Xbox Wireless Controller" from the available devices.
4. The Logo light stays on when connected.

Bluetooth Connection (Pro Controller Mode)

1. Slide the mode switch to the "NS" position.
2. Press Home to power on, then hold Home for 3 seconds to enter pairing mode.
3. On your PC, go to Bluetooth settings and select "Pro Controller" from the available devices.
4. The Logo light stays on when connected.

Wired Connection (Xbox Mode)

1. Slide the mode switch to the "Android/iOS/PC" position.
2. Connect the controller to your PC with the included Type-C cable.
3. The Logo light stays on when connected.

4.3 Android/iOS Connection

1. While the controller is powered off, slide the mode switch to the "Android/iOS/PC" position.
2. Briefly press the "Home" button to power on, then press and hold the "Home" button for 3 seconds. The LOGO light will flash rapidly, indicating it is in pairing mode.
3. On your phone, go to the Bluetooth settings and find the device named "Xbox Wireless Controller". Tap to connect.
4. Once connected, your phone will display "Connected", and the LOGO light on the controller will stay solid.
5. For future use, press the "Home" button to reconnect to your phone.

5. Advanced Features

5.1 Vibration Level Adjustment (Switch)

To adjust the vibration intensity on Nintendo Switch:

• Press and hold the "L" button, then press the "D-pad Down" button to decrease vibration.
• Press and hold the "L" button, then press the "D-pad Up" button to increase vibration.
• The controller will provide vibration feedback at the current intensity level to confirm the change.

5.2 Turbo Function

The Turbo function allows a button to be repeatedly pressed automatically while held down or toggled. The following buttons are Turbo-mappable: A, B, X, Y, L, R, ZL, ZR, Minus (-), Plus (+), D-pad Up, Down, Left, Right, R3, L3, Screenshot, GL (Mapping), GR (Mapping), Custom (Mapping).

Turbo Mode Switch LED Indicators

• Low: LOGO light flashes once.
• Medium: LOGO light flashes twice.
• High: LOGO light flashes three times.

5.3 Macro Function

The Macro function allows you to record a sequence of button presses and assign them to a single button. Assignable buttons include: A, B, X, Y, L, R, ZL, ZR, L3, R3, Minus (-), Plus (+), Screenshot, Home, Custom Button, D-pad, and joysticks (joysticks only support eight directions, no analog input).

• Macro Programming: Press and hold the "Setting" button for 3 seconds until the LOGO light turns solid purple and the controller vibrates briefly. Then perform the actions to be recorded. Press GL, GR, or "M" (Custom Button) to complete the recording (e.g., pressing GL stores the macro to GL). After successful setup, the LOGO light will return to its default state.
• Clear Macros: Long press the "Setting" button for 3 seconds; the LOGO light will turn solid purple, and the controller will vibrate shortly. Then press GL, GR, or "M" to clear the recorded macro for that button. (User-customized button operations will be deleted.)
• Macro Loop:
  • Press "Setting" + GL/GR/ "M" to enable the macro loop.
  • Press "Setting" + GL/GR/ "M" again to disable the macro loop.
  • Alternatively, press any button except the joysticks to terminate the macro loop.

6. Specifications

7. Safety Precautions

• Contains small parts. Keep out of reach of children under 3 years old. If accidentally swallowed or inhaled, seek immediate medical attention.
• Do not use the product near fire or heat sources.
• Do not expose the product to direct sunlight or high-temperature environments.
• Do not place the product in humid or dusty environments.
• Do not impact or drop the product.
• Do not directly touch the USB port, as it may cause a malfunction.
• Do not forcefully bend or pull the cables.
• Clean with a soft, dry cloth. Do not use chemicals such as gasoline or thinner for cleaning.
• Do not disassemble, repair, or modify the product yourself.
• Do not use the product for purposes other than its intended design. We are not responsible for accidents or damages caused by improper use.
• Do not look directly at the light beam, as it may harm your eyes.

8. Troubleshooting

• Controller not connecting: Ensure the mode switch is set to the correct platform (NS or Android/iOS/PC). Make sure the controller is in pairing mode (rapidly flashing LOGO light) and your device's Bluetooth is enabled. Try restarting both the controller and your device.
• Input lag or disconnection: Ensure the controller is fully charged. Move closer to your device to minimize interference. Check for any software updates for your device or the controller (if applicable via MOBAPAD APP).
• Buttons not responding: Check if the controller is properly connected. If specific buttons are not working, try resetting the controller using the reset hole.
• Charging issues: Ensure the USB-C cable is securely connected to both the controller and a power source. Check if the charging contacts are clean.
• Controller unresponsive: Use a thin object (like a paperclip) to press the reset hole on the back of the controller to perform a hard reset.

9. Warranty and Support

The MOBAPAD CHITU 2 Bluetooth Controller comes with a 1-Year Limited Warranty.

If you encounter any concerns or issues with your MOBAPAD controller, please do not hesitate to reach out to us. We are here to help.

• Email Support: service@mobapad.com
• Address: Longgang District, Shenzhen
• Online Resources:
  • Mobapad APP
  • Mobapad Facebook
  • Mobapad Subreddit
  • Mobapad Discord

10. Product Overview Video