1. Product Introduction
The ANDELI MCT-416P is a versatile 4-in-1 multiprocess welding machine designed for a wide range of applications, from hobbyists to experts. This machine integrates MIG (Gas/No Gas, Pulse, Synergy, Manual), TIG (HF), CUT (Plasma), and MMA (Stick) welding functions into a single unit. It features full digital control technology for strong welding performance and is capable of welding carbon steel, stainless steel, alloy steel, and galvanized steel, as well as cutting various metals.
Key features include a 5-inch LED display for real-time parameter monitoring, HF Arc Start for TIG and Plasma Cutting, 110V/220V dual voltage compatibility, and advanced safety features like VRD (Voltage Reduction Device).


2. Safety Notes
Always prioritize safety when operating welding and cutting equipment. Failure to follow safety precautions can result in serious injury or death.
- This product is NOT explosion-proof. Do not use in flammable or explosive environments.
- Disconnect power before wiring or making any adjustments. Reverse wiring may damage the module.
- Keep away from strong electromagnetic interference sources.
- Do not disassemble or modify the product yourself; this will void the warranty.
- Always follow industrial safety standards during installation and use.
- Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
- Ensure proper ventilation to avoid inhaling fumes.
- The VRD (Voltage Reduction Device) ensures operator safety in idle mode.
- Ensure the machine is properly grounded.
3. Package Contents
Upon receiving your ANDELI MCT-416P, please verify that all the following items are included:
- 1 x ANDELI MCT-416P Multiprocess Welder
- 1 x Gas Pipe
- 1 x Ground Clamp
- 1 x MMA Holder
- 1 x Air Pressure Regulator
- 1 x Knurl Groove Drive Roller
- 1 x Hose Hoop
- 1 x Pneumatic Joint
- 1 x Hose Barb
- 1 x Graphene Liner
- 1 x Gas Hose for MIG Welding
- 1 x TIG Torch
- 1 x Power Adapter Cord
- 1 x Plasma Cutting Torch
- 1 x MIG Gun
- 1 x User Manual (this document)


4. Setup Instructions
Before operating the machine, ensure it is properly set up according to the following steps:
4.1 Power Connection
- Ensure the machine is switched off.
- Connect the power adapter cord to the machine and a suitable 110V or 220V power outlet. The machine supports dual voltage.
- Verify the power source matches the machine's requirements.
4.2 Front Panel Overview

4.3 Connecting Accessories
- Ground Clamp: Connect the ground clamp cable to the appropriate terminal on the machine and securely attach the clamp to the workpiece.
- MIG Gun: Connect the MIG gun to the front panel. If using gas-shielded MIG, connect the gas hose from the MIG gun to the gas hose for MIG welding, and then to the air pressure regulator and gas cylinder.
- TIG Torch: Connect the TIG torch to the designated terminal. For HF TIG, ensure the gas hose is connected to the air pressure regulator and gas cylinder.
- Plasma Cutting Torch: Connect the plasma cutting torch. Ensure the air pressure regulator is connected to an external air compressor for consistent airflow.
- MMA Holder: Connect the MMA electrode holder for stick welding.
- Wire Feeder (MIG): Install the appropriate welding wire (Φ 0.8 or Φ 1.0, 1kg or 5kg) and the knurl groove drive roller.
5. Operating Instructions
The MCT-416P features a large 5-inch LED digital display for easy parameter adjustment and mode selection.

5.1 General Operation
- Power On: Turn on the main power switch. The LED display will illuminate.
- Mode Selection: Use the 'Modes Selection' knob (8 in Figure 4.1) to choose between MIG, TIG, CUT, or MMA.
- Parameter Adjustment: Use the 'MIG parameters adjustment' (2), 'MMA parameters adjustment' (6), and other controls to set the desired welding current, voltage, wire feed speed, and other parameters. The 5-inch LED screen provides real-time display of these settings.
- Material/Gas Selection: Select the appropriate material and gas type (7) for MIG or TIG welding.
- Torch Process Methods: Choose between 2T (non-self-lock) for quick fixes and tacking, or 4T (self-lock) for production welding and consistent beads (3).
- Start Welding/Cutting: Initiate the process according to the specific mode's requirements.
5.2 Specific Welding/Cutting Modes
- MIG Welding (GAS/NO GAS/PULSE/SYN/MAN):
- For gas-shielded MIG, ensure CO2 or mixed gas is connected. For Flux-cored, no gas is needed.
- The machine supports Φ 0.8 and Φ 1.0 welding wire (1kg and 5kg spools).
- Pulse MIG is ideal for advanced materials, thin metals, and applications requiring high aesthetics.
- Synergy MIG simplifies settings by automatically adjusting parameters based on material and wire diameter. - TIG Welding (HF):
- HF Arc Start provides precise control for impeccable welds on thin metals and stainless steel (above 0.8mm).
- Non-contact spot welding is available to reduce tungsten electrode contamination. - Plasma Cutting (CUT):
- HF Pilot Arc Start supports plasma cutting with an external air compressor.
- Cutting thickness: 1-25mm. Max cutting: 15mm (0.59") at 220V, 12mm (0.47") at 110V. - MMA Welding (Stick):
- Suitable for electrodes within the range of 1.6-4.0mm.
- Offers portability and versatility for challenging environments.
5.3 Advanced Features
- AutoSave and AutoRecover: The machine automatically saves current parameters and restores them after a power outage.
- Adjustable Hot Start: Enhances arc ignition for stable starts on challenging materials.
- Adjustable Arc Force Current: Optimizes welding performance by stabilizing the arc during voltage fluctuations.
- Parameter Fine-Tuning: Adjust slow wire feeding time, burn-back time, pre-gas time, and after-gas time for optimal results.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Regularly clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
- Connections: Periodically check all cable connections (power, ground, torch) for tightness and signs of wear or damage. Replace any damaged cables immediately.
- Consumables: Inspect and replace consumables such as MIG contact tips, TIG electrodes, plasma cutting nozzles, and diffusers as they wear out.
- Wire Feeder: Keep the wire feeder mechanism clean and free of debris. Ensure the drive roller is appropriate for the wire size and is not worn.
- Intelligent Fan: The intelligent fan system activates based on real-time temperature monitoring, ensuring precise cooling. Keep the fan vents clear.
- Storage: Store the machine in a dry, clean environment when not in use.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
- No Power:
- Check power cable connection.
- Verify power outlet is functional.
- Check circuit breaker. - No Arc/Poor Arc:
- Ensure ground clamp is securely attached to a clean metal surface.
- Check torch connections and consumables for wear or damage.
- Verify correct parameters are set for the chosen welding mode.
- For gas-shielded processes, check gas supply and flow rate. - Wire Feeding Issues (MIG):
- Check wire spool for tangles.
- Ensure drive roller is correctly tensioned and matches wire size.
- Inspect contact tip for blockage or wear. - Plasma Cutting Issues:
- Ensure adequate air pressure from the external compressor.
- Check plasma torch consumables (nozzle, electrode, shield cup) for wear. - Overheating:
- Allow the machine to cool down. The intelligent fan should activate.
8. Specifications
| Feature | Description |
|---|---|
| Model Number | MCT-416P |
| Brand Name | ANDELI |
| Working Principle | Inverter (IGBT) |
| Input Voltage | 110V / 220V Dual Voltage |
| Rated Output Current | Up to 160A (Welding), Up to 40A (Cutting) |
| Max Wire Diameter | 1.2mm |
| Applicable Welding Wire | Φ 0.8, Φ 1.0 (1kg and 5kg spools) |
| Applicable MMA Electrode | 1.6mm - 4.0mm |
| Cutting Thickness | 1-25mm (Max 15mm/0.59" @220V, 12mm/0.47" @110V) |
| Welding Material Thickness | 1-8mm |
| Material | High strength steel |
| Certification | CE |
| Key Selling Points | Portable, Multifunctional |
| Display | MAX 5-inch LED Digital Display (114mm/4.49 inch width, 60mm/2.36 inch height) |
| Cooling Mode | Fan Cooling |
| Insulation Grade | F |
| Protection Level | IP21S |
8.1 Detailed Welding Parameters

9. Warranty and Support
The ANDELI MCT-416P comes with a two-year warranty and free replacement parts for non-human quality defects. For any issues or technical support, please contact customer service.
9.1 Contact Information
For assistance, please reach out to our customer service:
- WhatsApp: +86 16633953613
- Email: jinpin13@126.com

10. User Tips
- Aluminum Welding: While the machine is capable of Pulse MIG for aluminum, ensure you use the correct wire and shielding gas (typically 100% Argon) for optimal results.
- Thin Materials: For very thin materials, especially with TIG, utilize the HF Arc Start and fine-tuning options for pre-gas and after-gas to prevent warping and ensure a clean finish.
- Plasma Cutting Precision: For precise plasma cuts, maintain a consistent standoff distance and ensure your external air compressor provides stable, dry air.
- Parameter Recall: Take advantage of the AutoSave and AutoRecover feature to quickly resume work with your preferred settings after interruptions.
- Safety First: Always double-check your PPE and work area ventilation before starting any welding or cutting operation.