1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Cada MOC Dinosaur Skeleton Building Blocks. This product line offers a choice of three distinct dinosaur skeleton models: C59012 (Triceratops), C59013 (Stegosaurus), and C59014 (Raptor). The blocks feature a unique fluorescent property, allowing the assembled models to glow in the dark after exposure to light, creating an "Incredible Museum" display effect.
Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building experience.
2. Safety Information
- Choking Hazard: This product contains small parts and is not suitable for children under 3 years old.
- Recommended Age: Suitable for ages 14 years and older. Adult supervision is recommended for younger builders.
- Material: Made from high-quality plastic.
- Handling: Keep building blocks away from extreme heat or open flames.
- Cleaning: Refer to the Maintenance section for proper cleaning instructions.
3. Package Contents
Each Cada MOC Dinosaur Skeleton Building Blocks set includes:
- Building block pieces for one specific dinosaur skeleton model (C59012, C59013, or C59014).
- Assembly instruction booklet specific to the chosen model.
- Display base.
Figure 1: Overview of the Cada MOC 3-in-1 Dinosaur Skeleton Building Blocks set.
4. Assembly Instructions
Each dinosaur model (C59012, C59013, C59014) comes with its own detailed, step-by-step instruction booklet. Follow the instructions provided in the booklet for the specific model you wish to assemble.
- Unpack: Carefully open the box and lay out all the building block bags. It is recommended to open bags one at a time as needed to avoid mixing pieces.
- Identify Parts: Refer to the parts list in your instruction booklet to familiarize yourself with the different types of blocks.
- Follow Steps: Assemble the model by following the numbered steps in the instruction booklet. Pay close attention to the diagrams and piece orientation.
- Secure Connections: Ensure all blocks are firmly pressed together to create a stable and durable structure.
- Display Base: Once the dinosaur skeleton is complete, attach it to the provided display base as indicated in the instructions.
Figure 2: Example packaging for Model C59012 (Triceratops).
Figure 3: Example packaging for Model C59013 (Stegosaurus).
Figure 4: Example packaging for Model C59014 (Raptor).
5. Operating Instructions (Fluorescent Feature)
The dinosaur skeleton models are designed with fluorescent properties, allowing them to glow in the dark. To activate this feature:
- Exposure to Light: Place the assembled dinosaur skeleton under a bright light source (e.g., sunlight, strong room light, UV light) for several minutes. The longer the exposure, the brighter and longer the glow will last.
- Dark Environment: Move the model to a dark room or area to observe the glowing effect.
Figure 5: Assembled dinosaur skeletons showcasing their fluorescent properties.
6. Maintenance
- Cleaning: To clean the building blocks, gently wipe them with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry immediately. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the building blocks and assembled models in a cool, dry place away from direct sunlight to prevent discoloration or damage to the plastic.
- Disassembly: If disassembling a model, do so carefully to avoid breaking or bending pieces. Store disassembled pieces in their original bags or a suitable container to prevent loss.
7. Troubleshooting
- Problem: Pieces do not fit together.
- Solution: Double-check the instruction booklet to ensure you are using the correct pieces and orienting them correctly. Apply firm, even pressure when connecting blocks. If a piece is consistently difficult, ensure there are no obstructions or manufacturing defects.
- Problem: Model is unstable or falls apart.
- Solution: Review the assembly steps to ensure all connections are secure. Some pieces may require a stronger press to fully engage. Ensure the model is placed on a flat, stable surface. If the issue persists, re-examine the structural integrity of key joints.
- Problem: Fluorescent feature is not glowing brightly.
- Solution: Ensure the model has been exposed to a bright light source for a sufficient amount of time (at least 5-10 minutes). The glowing effect is most noticeable in complete darkness. UV light sources can enhance the glow.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Cada |
| Model Numbers | C59012, C59013, C59014 |
| Material | Plastic |
| Certification | CE |
| Recommended Age | 14+ years |
| Battery Included | No |
| Electronic Components | No |
| Package Length | 27 cm |
| Package Width | 16 cm |
| Package Height | 8 cm |
| Package Weight | 0.307 kg |
9. User Tips
- Organize Pieces: Before starting, sort pieces by color or shape into small containers or trays to make assembly easier and faster, especially for complex models.
- Lighting for Glow: For the best fluorescent effect, expose the models to direct sunlight or a strong UV light for at least 15-30 minutes before viewing in a completely dark room. The glow will gradually fade over time.
- Display Creativity: Experiment with different poses for your dinosaur skeletons on their display bases to create dynamic and engaging scenes for your collection.
10. Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.