1. Product Overview
This Cada MOC building block set allows you to construct three different fluorescent dinosaur skeletons: a Tyrannosaurus Rex, a Triceratops, and a Stegosaurus. The design adheres to universal connection system standards, ensuring compatibility with other major building block brands. All parts are made from food-grade ABS environmental protection plastic, free from harmful substances such as bisphenol A (BPA) and phthalates. The product has passed international safety certifications including ASTM F963-23 (USA), EN 71 (EU), and GB 6675 (China), ensuring safe use.

1.1 Target Audience
This building block set is suitable for children aged 14 and above, and adults. For younger children aged 3-6, adult supervision is required during use, especially with smaller parts.
2. Specifications
2.1 Basic Size Definitions
- Lego Unit: 1 unit for small bricks = 8mm.
- Studs: Protruding connections on the top of blocks, with a diameter of 5.0mm and a center distance of 8.0mm between adjacent studs.
- Anti-studs: Grooves on the bottom of blocks for precise engagement with studs to achieve fixation.
2.2 Common Part Sizes (Small Bricks)
| Part Type | Specification (L x W x H) | Actual Size | Application |
|---|---|---|---|
| Standard Brick | 2×4×1 | 31.8×15.4×12.7mm | Basic construction, structural support |
| Standard Brick | 2×2×1 | 15.9×15.9×12.7mm | Detail filling, small structures |
| Thin Plate | 1×2×1/3 | 15.8×7.7×3.2mm | Detail decoration, laminating reinforcement |
| Tile (Smooth Surface) | 2×4×1/3 | 31.8×15.4×3.2mm | Smooth surface decoration |
| Base Plate (Basic) | 32×32 studs | 25cm×25cm | Construction base, scene fixation |
| Base Plate (Large) | 48×48 studs | 38cm×38cm | Large scenes, multi-person collaborative construction |
2.3 Product Attributes
- Material: Plastic (ABS)
- Is Electric: No Battery
- Barcode: Yes
- Certification: CE
- Gender: Unisex
- Origin: Mainland China
- High-concerned chemical: None
2.4 Package Dimensions
- Length: 28 cm
- Width: 16 cm
- Height: 8 cm
- Weight: 0.304 kg
3. Assembly Guide
3.1 Preparations
- Part Classification: Unpack parts sequentially according to the bag labels in the manual (e.g., "Step 1-XX"). For unpackaged parts, sort them by color and shape. Store special parts like gears, axles, and ball joints separately.
- Tool Preparation: Basic tools include a brick separator (for tightly fitted parts) and a soft brush (for cleaning dust). Optional parts sorting boxes and magnetic storage trays can improve efficiency.
- Environmental Requirements: Choose a spacious and flat tabletop or floor, preferably with a non-slip mat. Avoid assembling in humid or narrow areas.
3.2 Basic Assembly Skills
- Connection Method: Align the anti-studs of the upper block with the studs of the lower block. Press vertically downward until fully engaged. A "click" sound indicates successful fixation.
- Structural Reinforcement:
- Vertical Stacking: For every 5 additional layers, it is recommended to add horizontal supports (e.g., 1×2 plates) to enhance stability.
- Horizontal Splicing: Adopt the "interlocking structure" (upper bricks covering gaps of lower bricks) to increase bending resistance by 30%.
- Use of Special Parts:
- Cross Pins: Select the appropriate size by comparing with the length marking in the manual.
- Movable Parts: Reserve a 1-2mm gap for ball joints to avoid jamming. Add 1 idler gear for every 5 gears in gear transmission to reduce wear.
3.3 Interpretation of Manual Symbols
| Symbol | Meaning | Operation Tips |
|---|---|---|
| Unnumbered | Special/large parts (without independent packaging) | Find and set aside before assembly |
| Arrow Guide | Hint for part installation angle | Align and splice according to the arrow direction |
| n times | Repeat assembly n times | Complete the same components in batches before overall assembly |
| Rotation Symbol | Need to adjust the angle for continued splicing | Rotate the part to the appropriate position |
| Length Mark | Comparison of cross pin lengths | Align the part with the mark to confirm the size |
3.4 Advanced Assembly Suggestions
- Color Matching: Follow the "7:2:1 Rule" (70% main color + 20% auxiliary color + 10% accent color) to avoid messy colors.
- Modular Construction: Split complex models into independent subsystems (foundation, main body, decoration) first, then assemble them as a whole to reduce error rate.
- Dynamic Structures: Balance flexibility and stability at the connection points of movable parts to avoid excessive looseness or tightness.
3.5 Model Examples



4. Safety Precautions
4.1 Usage Specifications
- Do not put blocks (especially small ones) into the mouth, nostrils, or ears to avoid suffocation risk.
- Do not use blocks as projectiles or weapons, and prohibit use during horseplay.
- Children aged 3-6 must be accompanied by adults during use, and unsafe behaviors should be corrected in a timely manner.
- Avoid playing while running or jumping to prevent falling and injury from stepping on scattered blocks.
4.2 Prohibited Scenarios
- Electronic parts (if applicable to other sets, though this set is "No Battery") are prohibited from contacting water sources to avoid short circuits, damage, and safety risks.
- Do not immerse assembled mechanical components (such as gearboxes) in water to prevent internal mold growth.
- Do not use metal tools to forcefully pry or disassemble parts to avoid fragmentation and sharp edges.
- It is not recommended to use blocks as decorations in aquariums or fish tanks.
4.3 Regular Inspection
- Inspect the integrity of blocks weekly. Immediately stop using and replace any damaged, cracked, or deformed parts.
- Store small and large bricks separately to prevent young children from accessing small bricks.
- If parts are lost, contact customer service for replacement according to the part number in the manual's parts list.
4.4 Warning
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
5. Maintenance
5.1 Cleaning Methods
- Regular Cleaning: Soak in mild soapy water, wipe gently with a soft cloth or sponge. Avoid using chlorine bleach or strong corrosive cleaners.
- Gap Cleaning: Use a soft brush or a hair dryer on low temperature to clean dust in part gaps.
- Thoroughly dry after cleaning to prevent moisture residue and bacterial growth.
5.2 Storage and Preservation
- Store in a dry and well-ventilated place to avoid part aging due to humid environments.
- Use sorting boxes or storage bags to organize parts by type to prevent loss.
- Avoid direct sunlight to prevent color fading and material embrittlement.
- For long-term non-use, it is recommended to disassemble large assembled models to reduce part fatigue and wear.
5.3 Service Life
- Under normal use conditions, the blocks can maintain good performance for many years. They have passed rigorous bite strength, impact, and pressure tests (can withstand 15kg pressure and 1.5m drop impact).
- Avoid long-term heavy pressure or high-temperature environments to extend service life.
6. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for building block enthusiasts include:
- Always double-check the instruction manual for specific part orientations.
- Organizing parts before starting assembly can significantly speed up the building process.
- If a connection feels too loose or too tight, ensure you are using the correct parts as per the instructions.
7. Troubleshooting
If you encounter any issues during assembly or with the finished model, consider the following:
- Missing or Damaged Parts: Refer to the "Regular Inspection" section (4.3) for guidance on contacting customer service for replacements.
- Loose Connections: Ensure parts are fully pressed together until a "click" is heard. Check if the correct parts are used as per the manual.
- Model Instability: Review the "Structural Reinforcement" suggestions (3.2) to ensure adequate support is built into the model.
For further assistance, please refer to the "Product Information and Support" section.
8. Product Information and Support
8.1 Executive Standards
This product complies with the following standards:
- GB 6675-2014 (China)
- ASTM F963-23 (USA)
- EN 71 (EU)
8.2 Customer Support
For part replacement, technical consultation, or creative inspiration, please contact the customer service hotline provided by the seller or manufacturer. A detailed user manual in PDF format is also available for download: User Manual (PDF).
8.3 Copyright Statement
This product follows universal connection standards and is designed for compatibility. It is not an official Lego brand product.