1. Product Overview
The SEJOY Air Humidifier and Essential Oil Diffuser combines humidification with aromatherapy, featuring a unique LED flame effect. It is designed to create a relaxing and comfortable atmosphere in various indoor environments.
Figure 1: SEJOY Air Humidifier with LED flame effect.
Package Contents:
- 1 x 300ML Aroma Diffuser
- 1 x USB Cable
- 1 x User Manual
- 1 x Cleaning Brush
Figure 2: Included accessories: Diffuser, USB Cable, User Manual, Cleaning Brush.
2. Setup Instructions
-
Unboxing and Placement:
Carefully remove all components from the packaging. Place the diffuser on a stable, flat surface, away from direct sunlight, heat sources, and electronic devices that may be sensitive to moisture.
Video 1: Unboxing and initial setup of the diffuser.
-
Filling the Water Tank:
- Lift up the top cover of the diffuser.
- Fill the water tank with clean tap water up to the 'MAX' line (300ML capacity). Do not overfill.
- Add 2-3 drops of your preferred essential oil directly into the water tank. Adjust the amount based on desired fragrance intensity.
- Replace the top cover securely.
-
Connecting Power:
Insert the USB power cable into the designated port on the diffuser and connect the other end to a 5V USB power source (e.g., a USB wall adapter, computer USB port, or power bank). The device operates on 5V and is not compatible with higher voltage sources like car 12-24V outlets without a suitable adapter.
Figure 3: Step-by-step guide for product use.
3. Operating Instructions
The diffuser features mechanical button switches for easy control.
-
Power On/Off and Mist Control:
Press the 'ON' button to start the mist and flame effect. Press again to turn off. The device uses ultrasonic atomization technology for a fine mist.
-
Timer Settings:
Short press the timer button to cycle through the available timing options: 2 hours, 4 hours, or 6 hours of continuous diffusion. The diffuser will automatically shut off once the selected time expires or when the water runs out.
Figure 4: Timer options for automatic shut-off.
-
LED Flame and Atmosphere Lights:
The diffuser features a realistic LED flame effect with 6 kinds of light effects (including blue and orange light). The light can be set to a constant color, gradient color, or turned off completely. Refer to the specific light control button (often marked 'L' or a light icon) to cycle through these modes.
Figure 5: Examples of the 6 atmosphere light options.
-
Automatic Shut-off:
For safety, the diffuser is equipped with a water-shortage power-off protection feature. It will automatically turn off when the water level is too low or completely depleted, preventing dry burning.
Figure 6: Waterless auto shut-off safety feature.
4. Maintenance
Regular cleaning ensures optimal performance and extends the lifespan of your diffuser.
-
Daily Cleaning:
After each use, empty any remaining water from the tank. Wipe the inside of the water tank with a soft, damp cloth. Do not use harsh detergents or abrasive materials.
-
Weekly Deep Cleaning:
Unplug the diffuser. Use the provided cleaning brush to gently clean the ultrasonic plate (the small ceramic disc at the bottom of the water tank). This helps remove essential oil residue and mineral buildup. You can also use a cotton swab dipped in white vinegar to clean hard-to-reach areas, then rinse thoroughly with clean water.
-
Storage:
If not in use for an extended period, ensure the diffuser is clean and completely dry before storing it in a cool, dry place.
5. Troubleshooting
-
No Mist or Low Mist Output:
- Check if there is enough water in the tank. The diffuser will automatically shut off if water is low.
- Ensure the top cover is properly seated.
- Clean the ultrasonic plate with the provided brush to remove any residue that might be blocking mist production.
-
Device Not Turning On:
- Verify that the USB cable is securely connected to both the diffuser and a working 5V power source.
- Check if the power source (e.g., wall adapter) is functioning correctly.
-
Unusual Noise:
- Ensure the diffuser is placed on a flat, stable surface.
- Check for any foreign objects in the water tank or near the ultrasonic plate.
- The device is designed for quiet operation (as low as 29.9dB), so persistent loud noise may indicate an issue.
-
Water Leakage:
- Do not overfill the water tank beyond the 'MAX' line.
- Ensure the top cover is correctly and tightly closed.
- Avoid moving the diffuser while it is operating or contains water.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | sejoy |
| Capacity | 300 ml |
| Product Type | Aromatherapy diffuser |
| Product Dimensions (L*W*H) | 230mm * 100mm * 115mm (approx. 9in * 4in * 4.4in) |
| Rated Power | 7W |
| Rated Voltage | 5V |
| Rated Current | 2A |
| Power Source | USB |
| Length of Power Cord | 1.2m |
| Switching Mode | Mechanical button switch |
| Housing Material | PP, ABS, AS |
| Atomizing Quantity | 13±5mL/h |
| Diffusion Time | 16-23 hours (continuous) |
| Light Effects | 6 kinds of LED flame/atmosphere lights |
| Timer Settings | 2H, 4H, 6H |
| Noise Level | <36dB (as low as 29.9dB) |
| Humidification Method | Mist Discharge |
| Installation Type | Mini, Household |
| Certification | CE, EMC, ROHS |
| Package Weight | 0.8 kg |
| Package Dimensions | 27cm x 14cm x 14cm |
Figure 7: Product dimensions and capacity.
7. User Tips
- For optimal fragrance diffusion, use high-quality essential oils.
- The diffuser's quiet operation (<29.9dB) makes it ideal for bedrooms and offices without disturbing sleep or work.
- The waterless auto shut-off feature provides peace of mind, allowing you to use it overnight without worry.
- Experiment with different essential oil blends to create various moods and atmospheres.
- Always ensure the diffuser is connected to a stable 5V USB power source for proper function.
8. Frequently Asked Questions (FAQ)
- Q: Can this diffuser be used without a power source (electrical plug or USB connection)?
- A: No, the SEJOY Air Humidifier requires a 5V USB power connection to operate. It does not have an internal battery.
- Q: Is it suitable for use in a car (12-24V)?
- A: The device operates on 5V. While it uses a USB connection, standard car outlets provide 12-24V. To use it in a car, you would need a compatible 12-24V to 5V USB adapter to prevent damage to the diffuser.
9. Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty purposes.





