Product Overview
The VIVOHOME Smart Bathroom Exhaust Fan is designed to provide efficient ventilation, intelligent climate control, and enhanced ambiance for your bathroom or other suitable rooms. It features an energy-saving EC motor, automatic humidity sensing, multi-color RGB lighting, adjustable CCT LED light, a built-in Bluetooth speaker, and convenient remote control.
Specifications
| Feature | Detail |
|---|---|
| Electric Fan Design | Exhaust Fan |
| Power Source | EC Motor (45W) |
| Room Type | Bathroom, Bedroom, Gaming Room, Home Cinema |
| Mounting Type | Ceiling Mount |
| Airflow (CFM) | 30 / 110 / 160 CFM (Auto-switching based on humidity), Manual 6-speed control (up to 150 CFM) |
| Noise Level | 0.1 - 1.5 Sones |
| RGB Light | 7 Static Colors, Color-cycle Mode, Dynamic Mode, Breathing Mode, Music-sync Light Show |
| LED Light (CCT) | 2700K, 4000K, 5700K (6-level adjustable brightness, 1500LM max) |
| Night Light | 200LM, 2700K (Glare-free) |
| Special Features | Bluetooth Speaker, Humidity Sensor, Remote Controlled, Timer (0.5/1/1.5 H), Memory Function |
| Housing Material | Lightweight, rust-proof ABS and PP |
| Housing Dimensions | 8.9 × 8.9 × 5.7 inches |
| Panel Dimensions | 11.8 × 11.8 inches |
| Duct Diameter | 4 inches |
| Recommended Cutout | New Install: 10.2 × 10.2 inches; Replacement: Fits existing 10 - 10.4 inch cutouts |
| Package Size | 13.4 × 12.6 × 7.5 inches |
| Package Weight | 6.4 lb |
Setup and Installation
This section provides general guidelines for installing your VIVOHOME Smart Bathroom Exhaust Fan. It is recommended to consult a qualified electrician for wiring and installation to ensure safety and compliance with local building codes.
Before Installation:
- Ensure the power supply to the installation area is turned OFF at the circuit breaker.
- Verify that the ceiling opening dimensions are compatible with the fan's housing and panel.
- Gather all necessary tools: screwdriver, wire strippers, drill, measuring tape, safety glasses, gloves.
- Unpack the fan and inspect for any damage.
Installation Steps:
- Prepare Ceiling Opening: For new installations, create a 10.2 x 10.2 inch cutout in the ceiling. For replacements, ensure the existing cutout is between 10 and 10.4 inches.
- Mount Fan Housing: Secure the fan housing (8.9 × 8.9 × 5.7 inches) into the ceiling opening using appropriate fasteners. Ensure it is firmly attached to ceiling joists or blocking.
- Connect Ducting: Attach a 4-inch diameter duct to the fan's exhaust port. Ensure a tight seal to prevent air leakage.
- Electrical Wiring: Connect the fan's electrical wires to your household wiring according to local electrical codes. Typically, this involves connecting live, neutral, and ground wires. Refer to the detailed wiring diagram in the included instructions.
- Install Face Panel: Once wiring is complete and tested, attach the 11.8 × 11.8 inch decorative face panel to the fan housing.
- Restore Power: Turn the power supply back ON at the circuit breaker.
Note: Detailed instructions are included in the product packaging to ensure a quick and hassle-free setup. Please refer to these for specific wiring diagrams and safety information.
Operating Instructions
Your VIVOHOME Smart Bathroom Exhaust Fan can be controlled via the included smart remote control.
Fan Control:
- Automatic Humidity Sensing: The fan will automatically switch between 3 speeds (30/110/160 CFM) based on detected humidity levels.
- Manual Speed Control: Use the 'Fan Speed +' and 'Fan Speed -' buttons on the remote to adjust the fan speed manually across 6 levels.
- AUTO Button: Press the 'AUTO' button to activate or deactivate the automatic humidity sensing mode.
Light Control (3CCT & Night Light):
- Light Switch: Use the dedicated light switch button to turn the main LED light ON/OFF.
- Brightness Adjustment: Use 'Brightness +' and 'Brightness -' buttons to adjust the brightness across 6 levels.
- Color Temperature (CCT): Cycle through 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White) using the 'K' button.
- Night Light: Activate the 200LM, 2700K night light mode using the 'Night Light' button.
- Memory Function: The fan remembers your last preferred color temperature, brightness, and manual fan speed settings.
RGB Light Control:
- RGB ON/OFF: Short press to switch RGB modes, long press to turn RGB light OFF.
- Static Colors: Choose from 7 static colors.
- Color-Cycle Mode: Activates a continuous cycle through colors.
- Dynamic Mode: Provides a lively, changing light effect.
- Breathing Mode: Creates a soft, pulsating light effect.
- Music-Sync RGB Light: Syncs the RGB lights to the beat of the music playing through the Bluetooth speaker.
Bluetooth Speaker:
- Bluetooth ON/OFF: Use the dedicated Bluetooth button on the remote to turn the speaker ON/OFF.
- Pairing: Once Bluetooth is ON, search for the fan's Bluetooth name on your device (e.g., smartphone, tablet) and pair.
- Music Playback: Play audio from your paired device through the fan's speaker.
Timer Function:
- Use the 'Timer' button to set the fan to turn off automatically after 30, 60, or 90 minutes.
Buzzer Control:
- The remote allows you to turn off the buzzer sound for silent operation.
Maintenance
Regular maintenance ensures optimal performance and longevity of your exhaust fan.
Cleaning:
- Power Off: Always turn off the power to the fan at the circuit breaker before cleaning.
- Remove Face Panel: Carefully detach the decorative face panel.
- Clean Fan Grille and Blades: Use a soft cloth or brush to remove dust and debris from the fan grille and blades. A mild detergent solution can be used for stubborn dirt, but ensure no liquid enters the motor housing.
- Clean Light Diffuser: Wipe the light diffuser with a soft, damp cloth.
- Reassemble: Once all parts are dry, reattach the face panel and restore power.
General Care:
- Do not use abrasive cleaners or solvents on any part of the fan.
- Ensure the fan's air intake and exhaust are not obstructed.
- Periodically check for any unusual noises or vibrations, which may indicate a need for professional inspection.
Troubleshooting
If you encounter issues with your exhaust fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply Loose wiring Remote battery low | Check circuit breaker and wall switch Inspect wiring connections (consult electrician) Replace remote battery |
| Fan is noisy or vibrates | Loose mounting Debris in fan blades Motor issue | Ensure fan housing is securely mounted Clean fan blades and grille Contact support if motor issue suspected |
| Light does not turn on | No power supply Loose wiring Light module issue | Check power and wiring Contact support |
| Bluetooth speaker not connecting | Bluetooth off on fan or device Device too far Already paired to another device | Ensure Bluetooth is enabled on both fan and device Move device closer to fan Disconnect from other devices and try again |
| Humidity sensor not working | Sensor obstructed Sensor malfunction | Ensure sensor area is clear Contact support |
| Remote control not responding | Battery low/dead Obstruction between remote and fan | Replace remote battery Ensure clear line of sight to fan |
For issues not listed here or if problems persist, please contact VIVOHOME customer support.
User Tips
- For optimal humidity sensing, ensure the fan is installed in a location where it can accurately detect moisture levels, typically near the shower or bath.
- Experiment with the different RGB light modes and CCT settings to find the perfect ambiance for various activities, from relaxing baths to bright morning routines.
- Utilize the timer function to ensure the fan runs long enough to clear humidity after a shower without unnecessary continuous operation.
- Keep the remote control in a convenient, dry location within the bathroom for easy access to all features.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official VIVOHOME website. Keep your purchase receipt as proof of purchase for any warranty claims.
