1. Introduction
The WJCOOLMAN Sky Curtain Plus is a high-performance ATX PC gaming case designed for enthusiasts seeking both aesthetics and functionality. Featuring a distinctive curved glass design, it offers a panoramic view of your internal components. This chassis supports a wide range of hardware, including ATX, MicroATX, and ITX motherboards, large graphics cards, and extensive cooling solutions. This manual provides essential information for the proper setup, operation, and maintenance of your new PC case.
Note: This product includes only the chassis. All internal components such as the motherboard, CPU, GPU, power supply, storage drives, and cooling fans must be purchased separately.
2. Setup and Component Installation
Before beginning installation, ensure you have all necessary components and tools. Work on a clean, static-free surface.
2.1 Unpacking
Carefully remove the chassis from its packaging. Inspect for any damage during transit. Keep all packaging materials for future transport or warranty claims.
2.2 Accessing the Interior
The Sky Curtain Plus features a quick-release side panel buckle design for easy access. Gently press the buckle to detach the side panels, typically the tempered glass panel, to access the interior for component installation.

Image: Side panel buckle press for quick release, simplifying disassembly.
2.3 Motherboard Installation
The case supports ATX, MicroATX (M-ATX), and ITX form factor motherboards. Install the necessary standoffs for your motherboard size before securing the motherboard with screws.

Image: Diagram illustrating compatibility with ITX, M-ATX, and ATX motherboards.
2.4 Power Supply Installation
The chassis supports power supplies with lengths of 140mm, 160mm, or 200mm. Install your power supply in the designated compartment, typically at the bottom rear of the case, and secure it with screws.

Image: Internal layout diagram indicating maximum CPU cooler height (157mm), GPU length (400mm), and power supply length (200mm).
2.5 Storage Drive Installation
The case provides dedicated bays for storage:
- Two (2) 3.5" HDD bays for traditional hard drives.
- Three (3) 2.5" SSD bays for solid-state drives.
Utilize the hard drive bracket for flexible expansion and secure installation.

Image: Visual representation of HDD dual-position stable storage and SSD three-disk display speed.

Image: Detailed view of HDD and SSD mounting locations.
2.6 Graphics Card (GPU) Installation
The chassis supports graphics cards with a maximum length of 400mm. It also features 7 available PCIE slots for expansion cards.
2.7 CPU Cooler Installation
The case accommodates CPU coolers with a maximum height of 157mm.
2.8 Cooling System Installation (Fans & Radiators)
The Sky Curtain Plus offers extensive cooling support:
- Top: Supports up to three (3) 120mm fans, compatible with a 360mm radiator.
- Rear: Supports one (1) 120mm fan.
- Front side of motherboard: Supports up to three (3) 120mm fans, compatible with a 360mm radiator.
- Bottom panel: Supports up to three (3) 120mm fans.

Image: Diagram detailing fan support for the front side of the motherboard (3x 120mm, 360mm radiator compatible) and bottom panel (3x 120mm).
2.9 Front Panel I/O Connections
Connect the front panel cables (USB, audio, power, reset, LED) to the corresponding headers on your motherboard. The front panel features:
- 1x HD Audio port
- 1x USB 3.0 port
- 1x USB 2.0 port
- Light Key
- Restart Button
- Power Switch

Image: Close-up of the front panel interface, highlighting the Light Key, Restart Button, Headphone audio, USB 2.0, USB 3.0, and Power switch.

Image: Another detailed view of the front panel I/O ports.
3. Operating Instructions
Once all components are installed and connected, you can power on your system.
- Power On: Press the Power Switch on the front panel to turn on your computer.
- Restart: Use the Restart Button for a soft reboot of your system.
- LED Control: The 'Light Key' button on the front panel is typically used to cycle through or control the lighting effects of compatible RGB components connected to your motherboard or a dedicated RGB controller (if installed).
- USB Ports: Use the USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices.
- Audio Ports: Connect your headphones or speakers to the HD Audio port.
Video: A product showcase demonstrating the WJCOOLMAN Sky Curtain Plus PC case with various internal components and RGB lighting effects.
4. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC components.
- Dust Filter Cleaning: The case is equipped with a top magnetic dust filter and a bottom pull-out dust filter. Regularly remove and clean these filters to prevent dust buildup inside the chassis, which can impede airflow and component cooling.

Image: Close-up view highlighting the top magnetic dust filter and the convenient pull-out design of the bottom dust filter.
- Exterior Cleaning: Use a soft, damp cloth to clean the exterior surfaces, especially the curved tempered glass panels. Avoid abrasive cleaners that could scratch the finish.
- Internal Dust Removal: Periodically use compressed air to remove dust from internal components and hard-to-reach areas within the case.
5. Troubleshooting
If you encounter issues with your PC build, consider the following general troubleshooting steps:
- No Power: Double-check all power connections from the power supply to the motherboard, CPU, and graphics card. Ensure the power switch on the power supply unit is in the 'ON' position.
- No Display: Verify that your monitor is connected to the graphics card (not the motherboard's integrated graphics, unless intended) and that the monitor is powered on and set to the correct input. Reseat the graphics card and RAM modules.
- Component Not Detected: Ensure all components (storage drives, RAM, expansion cards) are properly seated in their respective slots and securely connected. Check motherboard BIOS/UEFI settings to confirm detection.
- Overheating: Ensure all fans are spinning correctly and are oriented for optimal airflow. Clean dust filters and internal components. Verify CPU cooler installation and thermal paste application.
For specific component issues, refer to the manuals provided with those individual components.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | Sky Curtain Plus |
| Chassis Type | Desktops (Horizontal) |
| Case Size (L*W*H) | 453*280*435mm (including 25mm foot pad height) |
| Case Weight | 8kg |
| Material | SPCC Steel Plate, Tempered Glass, others |
| Motherboard Form Factor Support | ATX, MicroATX, ITX |
| Power Supply Model Support | ATX (140/160/200MM power supply) |
| Max CPU Cooler Height | 157mm |
| Max GPU Length | 400mm |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 3 |
| PCIE Expansion Slots | 7 |
| Front Panel I/O | Top HD Audio, 1x USB 3.0, 1x USB 2.0, Light Key, Restart Button, Power Switch |
| Fan Support (120mm) | Top: 3 (supports 360 radiator) Rear: 1 Front side of motherboard: 3 (supports 360 radiator) Bottom panel: 3 |
| Dust Filters | Top magnetic, Bottom pull-out |
| Side Panel Window | Yes (Curved Tempered Glass) |
| RGB Support | No built-in RGB strips (supports RGB fans via motherboard/controller) |

Image: Detailed chassis parameters including size, motherboard compatibility, power supply, CPU cooler, GPU, hard drive support, PCIE, and panel interface.

Image: Highlights of the Sky Curtain Plus style, including curved glass, USB 3.0, ATX/M-ATX/ITX support, GPU length limit, CPU height limit, and fan support.
7. User Tips
While no specific user reviews or Q&A were provided, general tips for PC case users include:
- Cable Management: Take time to route cables neatly behind the motherboard tray. This improves airflow, makes future upgrades easier, and enhances the aesthetic appeal through the tempered glass panel.
- Fan Orientation: Experiment with fan intake and exhaust configurations to achieve the best thermal performance for your specific components. A common setup is front/bottom intake and top/rear exhaust.
- Component Compatibility: Always double-check the dimensions of your chosen CPU cooler, graphics card, and power supply against the case's maximum limits to ensure a smooth build process.
8. Support
For further assistance or detailed diagrams, please refer to the official user manual PDF:
If you require technical support, please contact the manufacturer or your retailer.