1. Introduction
Thank you for choosing the SKMEI 2475 Digital Electronic Watch. This manual provides essential information for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and to enjoy all the features your new watch has to offer.
2. Key Features
- Movement: Digital
- Display Type: Digital
- Functions: 2 Time (Dual Time), Chronograph (Stopwatch), Countdown Timer, Alarm, Date/Week Display, EL Light (Backlight)
- Water Resistance: 3 Bar (30 meters)
- Case Material: Resin
- Band Material Type: Stainless steel or Silica gel (depending on variant)
- Clasp Type: Bracelet Clasp
3. Initial Setup
3.1. Removing Protective Film
Before first use, carefully remove any protective film from the watch face and back cover.
3.2. Band Adjustment
If your watch has a stainless steel band, you may need to adjust its length for a comfortable fit. This typically involves removing links. It is recommended to have this done by a professional watchmaker or jeweler to avoid damage.
4. Operating Instructions
The SKMEI 2475 watch features several buttons for various functions:
- MODE Button: Cycles through different modes (Time, Stopwatch, Countdown, Alarm, Dual Time).
- LIGHT Button: Activates the EL backlight.
- START Button: Used to start/stop functions in Stopwatch and Countdown modes, and to adjust settings.
- RESET Button: Used to reset functions in Stopwatch and Countdown modes, and to adjust settings.
4.1. Setting Time and Date
- Press the MODE button repeatedly until you reach the Time Setting mode (usually indicated by flashing digits).
- Use the START or RESET buttons to adjust the flashing digit (seconds, minutes, hours, date, month, day of week).
- Press the MODE button to move to the next setting field.
- Once all settings are correct, press the MODE button again to exit Time Setting mode.
4.2. Using the Stopwatch
- Press the MODE button until you reach the Stopwatch mode.
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to clear the stopwatch to zero.
4.3. Setting the Alarm
- Press the MODE button until you reach the Alarm mode.
- Use the START or RESET buttons to set the desired alarm time.
- Press the MODE button to confirm and exit.
- To turn the alarm on/off, typically a combination of START and RESET or a dedicated button press in Alarm mode is used (refer to on-screen indicators).
4.4. Activating the EL Light
Press the LIGHT button to illuminate the display for a few seconds, making it visible in low-light conditions.
4.5. Product Demonstration Video
5. Care and Maintenance
5.1. Water Resistance
Your SKMEI 2475 watch is 3ATM water-resistant. This means it is suitable for daily use such as washing hands, sweating, or light rain. It is NOT suitable for showering, swimming, diving, or any prolonged water immersion. Do not press any buttons while the watch is wet.
5.2. Cleaning
Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For stubborn grime, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, which can damage the watch's finish.
5.3. Battery Replacement
The watch uses a CR2016 battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified technician to ensure the water resistance seal is properly maintained.
6. Troubleshooting
6.1. Display is blank or dim
- The battery may be low. Consider replacing the battery.
- Ensure no buttons are stuck in a pressed position.
6.2. Time is inaccurate
- Re-set the time following the instructions in Section 4.1.
- Extreme temperatures or strong magnetic fields can affect accuracy. Avoid exposing the watch to such conditions.
6.3. Water appears inside the watch
- Immediately stop using the watch.
- This indicates a breach in the water resistance. Seek professional repair to prevent further damage.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Skmei |
| Model Number | SKMEI 2475 |
| Item Type | Digital Wristwatches |
| Movement | Digital |
| Display Type | Digital |
| Case Material | Resin |
| Dial Window Material Type | Resin |
| Band Material Type | Stainless steel |
| Clasp Type | Bracelet Clasp |
| Water Resistance Depth | 3Bar (30 meters) |
| Case Thickness | 10.2mm |
| Dial Diameter | 33.4mm |
| Band Width | 22.5mm |
| Band Length | 22.5cm |
| Case Shape | Rectangle |
| Feature | Stop Watch, Luminous, Led Display, Chronograph, Complete Calendar, Alarm, Week Display |
| Battery Included | Yes |
| Voltage | <36V |
| Wireless | N |
| Certification | CE |
8. User Tips
- Color Variation: Due to shooting equipment and lighting, there might be slight color differences between the actual watch and product images.
- Manual Measurements: All dimensions are measured manually, so slight errors may occur.
- Water Resistance Reminder: While 3ATM water-resistant, avoid submerging the watch or pressing buttons underwater to prevent damage.
- Unisex Style: The watch's design is versatile and suitable for both men and women.
9. Warranty and Support
For any issues, questions, or support needs regarding your SKMEI 2475 watch, please contact the seller or manufacturer directly. Keep your purchase records for any warranty claims.
