Dyness XC003

Contents

Dyness High Voltage LiFePO4 Solar Battery System

Model: XC003

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Dyness High Voltage LiFePO4 Solar Battery System. This intelligent photovoltaic energy storage and control inverter system is designed for both off-grid and hybrid grid applications, offering reliable power storage with advanced safety features and flexible expansion capabilities.

XULICHI Intelligent Photovoltaic Energy Storage and Control Inverter System
Figure 1: XULICHI Intelligent Photovoltaic Energy Storage and Control Inverter System

2. Safety Information

Please read and understand all safety instructions before installing or operating the system. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

  • Installation must be performed by qualified personnel.
  • Do not attempt to open or disassemble the battery modules or inverter.
  • Ensure proper grounding of the system.
  • Keep the system away from flammable materials and sources of heat.
  • Do not expose the system to water or excessive moisture unless specifically rated for such conditions.
  • In case of fire, use a Class D fire extinguisher.

3. Package Contents

Verify that all components are present and undamaged upon receipt:

  • Dyness High Voltage LiFePO4 Battery Module(s)
  • Inverter Control Panel
  • Battery Module Control Panel(s)
  • Interconnection Cables (Power and Communication)
  • Mounting Hardware (if applicable)
  • User Manual (this document)

4. Product Overview

The Dyness system features a modular, stackable design for easy installation and maintenance. It integrates advanced LiFePO4 battery technology with a smart Battery Management System (BMS) and an inverter for comprehensive energy management.

4.1. Key Components

Product Structure Diagram
Figure 2: Product Structure Diagram
  • Inverter Control Panel: Top unit, manages power conversion and system control.
  • Battery Module Control Panel: Located on each battery module, provides local status and control.
  • Ventilation Hole: Ensures proper heat dissipation.
  • Lithium Battery Pack: Individual LiFePO4 battery modules.

4.2. Battery Management System (BMS)

The integrated BMS provides comprehensive protection and communication capabilities:

BMS Communication and Protection Features
Figure 3: BMS Communication and Protection Features
  • Over-heat protection
  • Over current protection
  • Short circuit protection
  • Over charge protection
  • Over voltage protection
  • Prevention of charge reverse
  • Voltage balance
  • Over discharge protection
  • Supports Bluetooth, RS485, and RS232 communication functions.

4.3. Modular Design

The system features an integrated stacked design, simplifying installation, disassembly, and subsequent operation and maintenance. Battery capacity can be expanded at any time by adding more modules.

Integrated Stacked Design for Easy Installation
Figure 4: Integrated Stacked Design

5. Specifications

FeatureSpecification
Brand NameDyness (XULICHI)
Model NumberXC003
Battery TypeLiFePO4 (Lithium Iron Phosphate)
System Voltage48V / 51.2V
Output Power Range10-20KWH (expandable up to 409.6KWh)
Grid ConnectionOff-grid, Hybrid grid
System TypeStackable, All-In-One
Dimensions (L*W*H per module)73cm * 60cm * 25cm
Weight (approx.)114 kg
Communication PortRS485, RS-232, Wifi, Bluetooth (CAN-shaped)
Protection ClassIP65 (also IP64, IP54, IP66, IP55)
Cycle Life8500+ cycles
Operating Temperature-20°C to 60°C
CertificationsCE/ROHS/UN38.3/MSDS
OriginMainland China (Shandong)
Product Dimensions and Expandability
Figure 5: Product Dimensions (LWH: 73x60x25 cm per module)
EU Test Attestation of Conformity Certificate
Figure 6: EU Test Attestation of Conformity Certificate

6. Setup and Installation

The system's integrated stacked design simplifies installation. Ensure the installation site is dry, well-ventilated, and within the specified operating temperature range.

6.1. Site Preparation

  • Choose a location that is easily accessible for maintenance.
  • Ensure the mounting surface can support the total weight of the system.
  • Maintain adequate clearance around the unit for ventilation.

6.2. Stacking Modules

Modules are designed to stack vertically. Carefully align and secure each module according to the provided mounting instructions. The system is similar in size to a vertical air conditioner, requiring no wall-mounting installation and preventing wall damage.

6.3. Wiring Connections

Refer to the detailed wiring diagrams for proper connection of photovoltaic panels, the power grid, and household loads. Ensure all connections are secure and correctly polarized.

System Charging Solution Wiring Diagram
Figure 7: System Charging Solution Wiring Diagram. This diagram illustrates the connection of photovoltaic panels (DC), the power grid (AC), the integrated energy storage battery and inverter, and the distribution to family loads (AC) and critical loads (AC). An RS485 connection and mutual inductor are also shown.
Detailed Wiring Diagram for Communication and Power Ports
Figure 8: Detailed Wiring Diagram for Communication and Power Ports. This diagram highlights connection points for parallel connection, RS232, BMS/RS485, NC G NO terminals, PV1 and PV2 inputs, and general CAN, RS485, RTU485 ports.

The system is compatible with 99% of inverter brands, including Deye, Growatt, Megarevo, Atess, SRNE, Voltronic Power, Solax Power, Goodwe, Hypontech, Epever, and Kehua Tech.

Inverter Compatibility List
Figure 9: Inverter Compatibility List

7. Operating Instructions

7.1. Initial Power-Up

After all connections are verified, follow the inverter's specific power-up sequence. The system will perform self-diagnostics.

7.2. Smart App Management

The system can be monitored and controlled via a dedicated mobile application. This app provides real-time system monitoring, smart control, and Over-The-Air (OTA) upgrades.

Video 1: Dyness Powerbox G2 Product Features. This video demonstrates the system's power output, safety features like automatic self-heating and fire suppression, IP65 protection, modularity, and smart app management capabilities.

7.3. Automatic Self-Heating

The system is equipped with automatic self-heating functionality, allowing it to charge properly even at temperatures as low as -20°C.

7.4. Fire Suppression

In the event of an internal thermal incident, the system's fire suppression mechanism reacts within 5 seconds, automatically relieving pressure to enhance safety.

8. Maintenance

  • Regular Inspection: Periodically check all cables and connections for signs of wear or damage.
  • Cleaning: Keep the exterior of the system clean and free from dust and debris. Ensure ventilation holes are unobstructed.
  • Software Updates: Regularly check for and apply firmware updates via the smart app to ensure optimal performance and security.
  • Environmental Conditions: Ensure the operating environment remains within the specified temperature and humidity ranges. The system offers IP65 protection, adapting to various weather conditions.

9. Troubleshooting

If you encounter issues, consult the following common problems and solutions:

ProblemPossible CauseSolution
System not powering onLoose power connections, tripped breaker, low battery voltageCheck all power cables, reset breakers, ensure sufficient solar input or grid power.
No power output to loadsInverter fault, overload, incorrect wiring to loadsCheck inverter status indicators, reduce load, verify load wiring.
Battery not chargingNo solar input, grid power issue, BMS fault, high/low temperatureVerify solar panel connection and output, check grid connection, monitor battery temperature, consult app for BMS errors.
Communication issues (Bluetooth/RS485/RS232/Wifi)Loose communication cables, incorrect settings, signal interferenceCheck communication cable connections, verify settings in the app, reduce interference sources.

For issues not listed here, please contact customer support.

10. User Tips

  • Scalability: The modular design allows for flexible expansion. You can connect up to 40 units in parallel, achieving a total capacity of 10.24KWh to 409.6KWh, making it suitable for various energy demands, including larger requirements like 40kW.
  • App Monitoring: Utilize the smart app for real-time monitoring of your system's performance, battery status, and energy flow. This helps in optimizing energy usage and identifying potential issues early.
  • Temperature Resilience: Thanks to its automatic self-heating feature, the system can operate and charge effectively even in cold environments down to -20°C.

11. Warranty and Support

The Dyness High Voltage LiFePO4 Solar Battery System comes with a 10-year warranty, ensuring long-term reliability and peace of mind. For technical support, warranty claims, or any inquiries, please contact your authorized dealer or the manufacturer directly.

Manufacturer Contact:

  • WhatsApp: +86 19176692407
  • Email: 1799483840@qq.com

© 2024 Dyness. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.