VARSTROM MAGMOVE City Bike

Contents

VARSTROM x MAGMOVE 700C EBIKE User Manual

Model: MAGMOVE City Bike

1. Introduction

Welcome to the VARSTROM x MAGMOVE 700C EBIKE user manual. This electric city bicycle is designed for adult riders seeking an effortless, efficient, and enjoyable urban commuting experience. Featuring a powerful BAFANG M200 mid-motor, a long-lasting removable battery, and an 8-speed Shimano gear system, the MAGMOVE City EBIKE combines performance with intelligent design for a smooth and responsive ride.

MAGMOVE City EBIKE in black, side view
Figure 1: The MAGMOVE City EBIKE (Men's version in Black)

2. Important Safety Information

Please read this section carefully before operating your e-bike. Failure to follow these instructions may result in serious injury or damage to the product.

  • Fire Risk Warning: Please mind potential fire risk and strictly follow the instruction manual for charging and storage of the battery.
  • Protective Equipment: While using the product, please wear appropriate protective equipment, including a helmet, and fully comply with all applicable local laws and regulations regarding e-bike operation.
  • Pre-Ride Check: Always perform a pre-ride safety check, including brakes, tires, battery level, and lights, before each use.
  • Weight Limit: Do not exceed the maximum load capacity of 150kg for the bicycle and 15kg for the rear rack.
  • Charging: Only use the charger provided with your e-bike. Do not leave the battery charging unattended for extended periods.
  • Water Exposure: Avoid submerging the e-bike or its electrical components in water. Do not use high-pressure washers directly on electrical parts.

3. E-Bike Components Overview

Familiarize yourself with the main parts of your MAGMOVE City EBIKE:

  • 3.1 BAFANG M200 Mid-Drive Motor

    The heart of your e-bike, providing powerful and quiet assistance. It features a torque sensor for a natural pedaling feel.

    Close-up of BAFANG M200 Mid Motor System
    Figure 2: BAFANG M200 Mid Motor System with pedals and chainring.
  • 3.2 36V 13Ah 468Wh Li-ion Battery

    A high-capacity battery integrated into the downtube for a sleek design. It is removable and lockable for convenient charging and security.

    Hidden 36V 13Ah Li-ion Battery inside e-bike frame
    Figure 3: Side-access hidden battery design within the frame.
  • 3.3 BAFANG DPC13 LCD Display

    A clear black and white display providing essential riding information such as speed, mileage, and battery level. It allows selection of 0-5 pedal assist levels.

    BAFANG DP C13 LCD Display showing speed, mileage, and battery
    Figure 4: BAFANG DP C13 LCD Display on handlebars.
  • 3.4 SHIMANO 8-Speed Gear System

    Provides smooth and reliable gear changes, adapting to various urban terrains and inclines.

    Close-up of SHIMANO 8-speed rear derailleur and shifter
    Figure 5: SHIMANO 8-Speed Transmission System (RD-M310-L ALTUS and SL-M315 shifter).
  • 3.5 KENDA 700C × 38C Tires & Front Suspension

    Wide, puncture-resistant tires offer grip and cushioning. The front coil suspension absorbs bumps for a smoother ride.

    KENDA 700C x 38C tire and front fork suspension
    Figure 6: KENDA Quality Tires and front fork suspension detail.
  • 3.6 Integrated LED Head & Rear Lights

    For enhanced visibility and safety during day and night riding, and in various weather conditions.

    LED Head and Rear Lights on e-bike
    Figure 7: Integrated LED Head and Rear Lights for safety.
  • 3.7 Rear Rack & Basket Fixing Points

    The e-bike comes with an integrated rear rack (Max Load: 15KG) for carrying cargo. Additionally, there are fixing points on the head tube (9.3cm height, 3.7cm width) for adding an optional front basket (basket not included).

    Rear rack on e-bike with a box
    Figure 8: Rear rack for cargo, max load 15KG.
    Basket fixing points on the head tube of the e-bike
    Figure 9: Head tube with basket fixing points (9.3cm x 3.7cm).

4. Initial Setup and Assembly

Your MAGMOVE City EBIKE may require some minor assembly upon arrival. Please follow these general steps:

  1. Unpacking: Carefully remove the e-bike and all components from the packaging. Retain packaging for future transport or returns.
  2. Handlebar Installation: Attach the handlebars to the stem, ensuring they are centered and tightened securely.
  3. Pedal Installation: Identify the left (L) and right (R) pedals. Thread the 'L' pedal counter-clockwise into the left crank arm and the 'R' pedal clockwise into the right crank arm. Tighten firmly.
  4. Seatpost and Saddle: Insert the seatpost into the frame and adjust the saddle height to a comfortable riding position. Secure the quick-release or bolt.
  5. Front Wheel Installation: If the front wheel is not pre-installed, attach it to the front fork, ensuring the quick-release or axle nuts are securely fastened and the brake rotor is correctly aligned with the caliper.
  6. Battery Insertion: Insert the fully charged battery into its hidden compartment in the downtube and lock it securely with the key.
  7. Pre-Ride Safety Check: Before your first ride, thoroughly check all bolts, nuts, and quick releases for tightness. Verify brake functionality, tire pressure, and ensure the lights are working.

5. Operating Your E-Bike

5.1 Powering On/Off and Display Functions

  • Power On: Press and hold the power button on the BAFANG DPC13 display to turn on the e-bike system.
  • Power Off: Press and hold the power button again to turn off the system.
  • Display Information: The display shows current speed, total mileage (ODO), trip distance, and battery charge level.
  • Assist Levels: Use the '+' and '-' buttons on the display to cycle through the 0-5 pedal assist levels. Level 0 provides no motor assistance, while Level 5 provides maximum assistance.

5.2 Charging the Battery

  • The 36V 13Ah battery can be charged while installed on the bike or removed.
  • Connect the charger to the battery charging port, then plug the charger into a standard wall outlet.
  • A full charge typically takes 5-6 hours. The charger indicator light will change when charging is complete.
  • Always use the original charger provided.

5.3 Gear Shifting

  • Your e-bike is equipped with a SHIMANO 8-speed gear system.
  • Use the shifter on the right handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or descents.
  • Shift gears smoothly and avoid shifting under heavy pedaling load to prevent damage to the drivetrain.

5.4 Braking

  • The e-bike features dual hydraulic disc brakes for reliable stopping power.
  • The right lever controls the rear brake, and the left lever controls the front brake (standard European configuration).
  • Apply both brakes simultaneously for optimal stopping power and control.

5.5 Lights

  • The integrated LED head and rear lights can be turned on/off via the display unit or a dedicated button (refer to display manual for specific operation).
  • Ensure lights are on when riding in low-light conditions or at night.

6. Maintenance and Care

  • Regular Cleaning: Clean your e-bike regularly with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
  • Tire Pressure: Check tire pressure before each ride. Maintain pressure within the range indicated on the tire sidewall (e.g., 40-65 PSI for 700C x 38C tires).
  • Brake Inspection: Regularly check brake pads for wear and brake levers for proper function. Adjust or replace as needed.
  • Chain Lubrication: Keep the chain clean and lubricated for smooth shifting and to prolong its lifespan.
  • Bolt Tightness: Periodically check all bolts and fasteners, especially on the handlebars, seatpost, and wheels, to ensure they are securely tightened.
  • Battery Care: Store the battery in a cool, dry place. If storing for an extended period, charge it to 50-70% every few months. Avoid fully discharging the battery.
  • Professional Service: For complex repairs or electrical issues, consult a qualified e-bike technician.

7. Troubleshooting Common Issues

ProblemPossible CauseSolution
E-bike does not power on.Battery not charged, battery not properly seated, loose connection, display issue.Charge battery fully. Ensure battery is securely inserted and locked. Check all cable connections. If problem persists, contact support.
Motor assist is not working.Assist level set to 0, brake levers engaged, sensor issue, motor error.Increase assist level on display. Ensure brake levers are fully released. Check for error codes on display. Contact support if no solution found.
Gears are not shifting smoothly.Dirty or unlubricated chain, misaligned derailleur, damaged shifter cable.Clean and lubricate the chain. Have a bike shop adjust the derailleur.
Brakes feel weak or noisy.Worn brake pads, contaminated rotors, air in hydraulic lines, loose caliper.Inspect brake pads and replace if worn. Clean rotors. Consult a bike technician for hydraulic system issues.

8. Technical Specifications

FeatureSpecification
Brand Namevarstrom
Model NumberMAGMOVE City Bike
CertificationCE
Rated Passenger CapacityOne Seat
StyleStandard Type
Max Speed<25km/h (25 km/h)
Range per Power> 60 km (60-120km)
Wattage200 - 250w
Power SupplyLithium battery
Voltage36V
Power SourceLithium battery
Motor TypeBrushless (250W Bafang M200 mid-drive)
OriginMainland China
FoldedNo
Wheel Size28” (28 × 2.0 inches)
Frame MaterialAluminum alloy (6061 aluminum alloy)
Rating Modes2 (Pedal/ Electric Assist)
No. of Assist Levels5
Battery Capacity36V 13AH (468Wh)
Charging Time5-6 hrs
Battery Life1000 Cycles
BrakesDual hydraulic disc brakes
SuspensionFront oil shock absorption
Max Load150kg
TransmissionShimano 8S gear system
DisplayLCD (BAFANG DPC13)
Sit and Hand Bar HeightAdjustable
Certificates for Motor and Battery
Figure 10: Attestation of Conformity and EMC Test Report for Motor and Battery.

9. Warranty and Support

VARSTROM provides comprehensive warranty coverage for your MAGMOVE City EBIKE:

ItemWarranty Period
E-Bike Frame24 Months
Motor & Battery12 Months
Parts & Accessories1 Month

Under Warranty Conditions:

  • If there is any quality problem within 6 months (Based on Delivery Date), all warranty costs (repair cost, material cost, shipping cost, etc.) are the responsibility of the seller.
  • If there is any quality problem more than 6 months but not more than 12 months (Based on Delivery Date), the repair cost and material cost are the responsibility of the seller, while the shipping cost is the responsibility of the buyer.

Out of Warranty Conditions:

  • If the warranty period is exceeded, for products from our store, we can continue to provide after-sales service, but the cost will be the responsibility of the buyer. The exact cost depends on the specific issue.

For warranty claims or technical support, please contact Varstrom EU Store directly. Our network of certified service centers across the EU and UK ensures prompt repairs and support.

Warranty Service table with icons for E-Bike Frame, Motor & Battery, Parts & Accessories
Figure 11: Visual representation of warranty periods for different components.

10. User Tips

  • DDP Assurance: For customers in France, Spain, Netherlands, Italy, Bulgaria, Belgium, Latvia, Poland, Denmark, Finland, Portugal, Sweden, Slovakia, Slovenia, Greece, Hungary, Czech Republic, Lithuania, Luxembourg, Romania, Ireland, Estonia, Croatia, all taxes and import duties are pre-paid, ensuring a hassle-free delivery experience.
  • Island Deliveries: For logistical reasons, delivery to island addresses is not possible. Please provide an alternative mainland address if applicable.
  • Battery Range: The stated range of 60-120km is under ideal conditions. Actual range may vary based on terrain, rider weight, assist level, and weather.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.