KBDcraft 01001 Adam

Contents

KBDcraft 01001 Adam Mechanical Keyboard User Manual

Model: 01001 Adam | Brand: KBDcraft

Introduction

The KBDcraft 01001 Adam is a unique DIY mechanical keyboard kit designed with a building block aesthetic, offering a highly customizable and engaging assembly experience. It features a Gasket structure for enhanced typing feel, hot-swappable switches for easy customization, and supports QMK/VIAL firmware for advanced key mapping. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

KBDcraft 01001 Adam Kit main image, showing the 60% keyboard with building block aesthetic and small figures.
Figure 1: KBDcraft 01001 Adam Kit (60% layout)

Package Contents

Your KBDcraft 01001 Adam keyboard kit includes the following components:

  • Keyboard case components (ABS material, building block style)
  • PCB (Printed Circuit Board)
  • POM plate
  • Hot-swappable switches (S² Engine Gen.2 switches, if included in kit)
  • Keycaps (English layout)
  • Assembly tools (if included)
  • USB cable
Detailed breakdown of KBDcraft 01001 Adam keyboard components for assembly.
Figure 2: Exploded view of keyboard components

Setup and Assembly

The KBDcraft 01001 Adam keyboard is designed for DIY assembly. Follow these steps carefully:

  1. Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
  2. Prepare the PCB: Ensure the PCB is clean and free from any debris.
  3. Install Stabilizers: If not pre-installed, attach the stabilizers to the PCB for larger keys (Spacebar, Shift, Enter, Backspace).
  4. Mount the Plate: Place the POM plate onto the PCB. The Gasket structure design ensures a flexible and comfortable typing experience.
  5. Install Switches: Align each hot-swappable switch with the sockets on the PCB and plate. Press firmly until the switch clicks into place. Ensure the pins are straight to avoid bending.
  6. Attach Keycaps: Once all switches are installed, place the keycaps onto their respective switches.
  7. Assemble the Case: The keyboard case utilizes a building block design for assembly without screws. Carefully connect the case components around the assembled PCB, plate, and switches.
  8. Connect USB Cable: Plug the provided USB cable into the keyboard and your computer.

The modular design allows for various configurations, including a 60% layout, an 80% layout, or adding a dedicated Numpad module to either side of the main keyboard.

KBDcraft 01001 Adam keyboard with modular numpad expansion.
Figure 3: Modular expansion with Numpad attached
KBDcraft 01001 Adam keyboard and separate numpad module.
Figure 4: KBDcraft 01001 Adam keyboard and separate Numpad module
Diagram showing the Gasket structure and S² Engine Gen.2 switch components.
Figure 5: Gasket structure and S² Engine Gen.2 switch details

Operating Instructions

Basic Operation

  • Connection: The KBDcraft 01001 Adam is a wired keyboard. Connect it to your computer using the provided USB cable.
  • Compatibility: Compatible with Desktop PCs, Laptops, and Tablets.
  • Layout: Standard English 68-key layout (for 60% model). Other modular layouts (e.g., 80%, Numpad) are also available.

Advanced Customization (QMK/VIAL)

Your keyboard supports QMK/VIAL firmware, allowing for extensive customization of key mappings, macros, and lighting (if applicable, though this model has no backlight). To utilize these features:

  1. Download QMK Toolbox/VIAL Software: Obtain the necessary software from the official QMK or VIAL websites.
  2. Connect Keyboard: Ensure your keyboard is connected via USB.
  3. Enter Bootloader Mode: Follow specific instructions for your PCB to enter bootloader mode (often involves pressing a reset button on the PCB or a key combination).
  4. Flash Firmware: Use the software to flash custom firmware or modify keymaps. Refer to the QMK/VIAL documentation for detailed guides.

Hot-Swappable Switches

The hot-swappable design allows you to change switches without soldering. This is useful for trying different switch types or replacing faulty switches.

  • Removal: Use a switch puller tool to gently grip the top and bottom clips of the switch and pull it straight up from the PCB.
  • Installation: Align the pins of the new switch with the sockets on the PCB. Ensure the pins are straight. Press the switch firmly until it clicks into place.

Maintenance

  • Cleaning Keycaps: Remove keycaps and clean them with mild soap and water. Ensure they are completely dry before reattaching.
  • Cleaning the Case: Wipe the ABS case with a soft, damp cloth. Avoid harsh chemicals that may damage the material.
  • Switch Maintenance: Hot-swappable switches can be easily removed for cleaning or lubrication (lubing).
  • Material Quality: The keyboard is made from environmentally friendly materials that are resistant to fading.

Troubleshooting

  • Keyboard Not Responding:
    • Check USB cable connection to both the keyboard and the computer.
    • Try a different USB port or cable.
    • Ensure all switches are properly seated in their sockets.
  • Specific Keys Not Working:
    • Remove the keycap and switch for the problematic key.
    • Inspect the switch pins for bends or damage. Straighten gently if bent, or replace the switch.
    • Ensure the switch is fully inserted into the hot-swap socket.
  • QMK/VIAL Firmware Issues:
    • If custom firmware causes issues, try flashing the default firmware for your PCB model.
    • Consult the QMK/VIAL community forums for specific troubleshooting related to firmware.

Specifications

FeatureDetail
Brand NameKBDcraft
Model01001 Adam
TypeWired Mechanical Keyboard
Keyboard Standard68 keys (base model)
Operation StyleMechanical
Switches Hot SwapYes
Interface TypeUSB
Backlight TypeNo backlight
LanguageEnglish
ApplicationDesktop, Laptop, Number, Tablet
Wrist SupportNo
PackageYes
Battery IncludedYes (for internal functions/settings, as primary connection is wired)
High-concerned chemicalNone
OriginMainland China
Product Dimensions (approx.)Length: 30 cm, Width: 20 cm, Height: 10 cm
Product Weight (approx.)0.8 kg
Detailed specifications and diagram of S² Engine Gen.2 switches and Gasket structure.
Figure 6: S² Engine Gen.2 Switch Specifications and Gasket Structure

User Tips

  • Careful Assembly: Take your time during assembly, especially when installing switches, to avoid bending pins. The building block design makes disassembly and reassembly straightforward if needed.
  • Experiment with Switches: Since the keyboard is hot-swappable, don't hesitate to try different mechanical switches to find your preferred typing feel.
  • Explore QMK/VIAL: Dive into QMK or VIAL software to unlock the full potential of your keyboard. Custom keymaps can significantly enhance your workflow.
  • Modular Expansion: Consider adding the Numpad module for increased functionality, especially for data entry or specific applications.

Warranty and Support

For any issues or support inquiries, please contact the seller, Scorpio Store. Information regarding return and refund policies can be found on the product page or by contacting the seller directly.

The product is designed with security and privacy in mind. Your personal details are protected and not shared with third parties without consent.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.