BULIAN BT-Speaker-01

Contents

BULIAN Wireless Induction Speaker and Phone Holder

Model: BT-Speaker-01 (Also known as Bracket Speaker -026)

Introduction

Thank you for purchasing the BULIAN Wireless Induction Speaker and Multifunctional Mobile Phone Holder. This device combines a portable Bluetooth speaker with an innovative induction sound system and a convenient phone stand, enhanced with RGB ambient lighting. Please read this manual carefully to ensure proper use and to maximize your experience with the product.

Phone on speaker stand, showing music player interface and RGB lights
The Wireless Induction Speaker in use, displaying its RGB lighting and phone holder functionality.

Package Contents

Please check the box for the following items:

  • Bluetooth Speaker × 1
  • Charging Cable × 1 (USB 3.0 data cable)
  • User Manual × 1

Setup

Charging the Speaker

  1. Connect the provided charging cable to the speaker's charging port (USB-C / Micro USB) and a standard 5V charger.
  2. A red light indicator will illuminate, signifying that the device is charging.
  3. The red light will turn off once the speaker is fully charged.

Charging Time: Approximately 2-3 hours.

Power On/Off

Long press the Power button (located on the top of the speaker) for 3 seconds to turn the speaker on or off.

Operation

Button Functions

  • Power Button: Long press for 3 seconds to turn on/off. Short press to play/pause music.
  • Volume +: Short press to increase volume. Long press to skip to the next song.
  • Volume -: Short press to decrease volume. Long press to go to the previous song.
  • Mode Button: Short press to switch between Bluetooth and AUX modes.

LED Indicator

  • Blue flashing: Indicates the speaker is in Bluetooth pairing mode.
  • Blue always on: Indicates a successful Bluetooth connection.
  • Red: Indicates the speaker is charging.

Bluetooth Connection

  1. Long press the Power button to turn on the speaker.
  2. The LED indicator will flash blue, indicating it's in pairing mode.
  3. Open the Bluetooth settings on your phone or device, search for "BT-Speaker-01" (or similar name), and select it to connect.
  4. Once connected, the LED indicator will show a solid blue light. You can now play music and answer calls through the speaker.
Speaker with Bluetooth 5.3 chip visible and RGB ambient light ring
The speaker features Bluetooth 5.3 for stable, long-distance connections and an RGB ambient light ring that changes color with music or notifications.

Induction (Sensor) Mode

This speaker features an induction mode for instant sound generation without Bluetooth. Simply place your mobile phone on the speaker stand, and the sound will be amplified automatically. This mode is ideal for quick audio playback.

Phone being placed on the speaker, showing sound activation
Demonstration of the induction mode: instant sound upon placing the phone on the stand.

Switching Modes

The speaker supports dual-mode connection (Bluetooth and Induction). Use the Mode Button to switch between these two modes. The device intelligently switches between sensor mode and Bluetooth 5.3 dual-channel connection.

Two women using the speaker, illustrating dual mode connection
The speaker offers flexible connectivity with both induction and Bluetooth 5.3 modes.

AUX Mode

  1. Connect a 3.5mm audio cable (not included) to the speaker's AUX input and your audio device.
  2. The speaker will automatically switch to AUX mode.

Phone Holder Functionality

The speaker is designed to function as a stable phone stand, compatible with Android, Apple, and tablet devices. It allows you to watch videos, browse, or make video calls hands-free while enjoying amplified audio.

Phone and tablet on speaker stands
The speaker stand offers strong compatibility for various mobile devices.

RGB Ambient Lighting

The speaker features a 360° cool breathing light with an RGB ambient light ring on the front. This lighting automatically changes color with the rhythm of the music or mobile phone notifications, enhancing your audio-visual experience.

Video demonstrating the speaker's induction mode, Bluetooth connectivity, charging, and RGB lighting effects.

Maintenance

Cleaning

Wipe the speaker with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Avoid getting moisture into any openings.

Storage

Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.

Battery Care

To maintain optimal battery performance, avoid completely draining the battery frequently. If the battery runs out fast, ensure it is fully charged and consider lowering the volume during use to conserve power.

Troubleshooting

  • Cannot connect Bluetooth: Restart both the speaker and your phone/device, then attempt to reconnect.
  • No sound: Check the volume levels on both the speaker and your connected device. Ensure the speaker is in the correct connection mode (Bluetooth, Induction, or AUX).
  • Battery runs out fast: Ensure the speaker is fully charged. Lowering the volume during playback can extend battery life.
  • Overheating, smoke, or abnormal odor: Immediately stop using the device and disconnect it from any power source. Contact customer support.

Specifications

FeatureDetail
Product NamePhone Sensor Speaker Stand
Product ModelBT-Speaker-01 / Bracket Speaker -026
Speaker Size52mm (57mm sunken subwoofer)
Output Power5W (20W Pengpai Low Frequency)
Bluetooth Version5.3
Bluetooth Reception Distance10 meters (10m-20m maximum wireless range)
Input VoltageDC-5V (Type-C) / USB (5-20V DC)
Output5V-1A
Battery Capacity1200mAh (Also listed as 5000mAh in some descriptions, please refer to product packaging for exact capacity)
Play Duration4-10 hours (5 hours listed in some descriptions)
Charging Time2-3 hours (3 hours listed in some descriptions)
Play ModeBluetooth playback / Sensor playback
MaterialABS / Silicone (Plastic cabinet)
Color OptionsBlack / White
Weight160g (Product) / 398g (Package)
Dimensions (L x W x H)10cm x 8.3cm x 12.5cm (3.94in x 3.27in x 4.92in)
WaterproofYes
Built-in MicrophoneYes
Sound ModesHi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode
Audio CrossoverFull-Range
Impedance4 Ohm
Frequency Range60Hz-23KHz
CertificationCE, FCC, RoHS, UL
Product parameters table for Phone Sensor Speaker Stand
Detailed product parameters for the speaker.
Dimensions of the speaker stand
Physical dimensions of the speaker stand.

User Tips

  • Optimal Sound Quality: For the best audio experience, especially when using induction mode, ensure your phone's speaker is aligned with the induction area of the device. Experiment with phone placement to find the sweet spot.
  • Volume Control: While the speaker offers robust sound, for prolonged listening and to conserve battery, consider using moderate volume levels.
  • Dual-Mode Convenience: Leverage the dual-mode functionality. Use induction mode for quick, hassle-free audio, and Bluetooth for more stable, remote connections or when making calls.

Warranty & Support

Warranty

This product comes with a 3-month warranty from the date of purchase.

Customer Support

For any inquiries, technical support, or warranty claims, please contact our customer service team:

Please have your purchase details and product model number ready when contacting support.

For the full user manual in PDF format, please refer to the following link: User manual (PDF)

WARNING & SAFETY INSTRUCTIONS

WARNING: Risk of fire, explosion and burns.

  • Do not disassemble, crush, puncture, short external contacts or dispose of in fire or water.
  • Do not expose the product to high temperatures, direct sunlight or near heat sources.
  • Do not use the device if it is damaged, leaking or abnormal.

WARNING: Hearing damage.

  • Avoid listening at high volume for long periods of time, which may cause permanent hearing loss.

WARNING: Choking hazard.

  • Small parts are included. Keep away from children under 3 years old to prevent choking risk.

Other Safety Notes:

  • Do not use in humid, wet or dusty environments.
  • Do not use while charging for a long time.
  • Stop use immediately if overheating, smoke or abnormal odor occurs.
  • Use only the original charging cable and a standard 5V charger.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.