1. Introduction
The CEM DT-874 is a professional industrial thermal imager designed for precision temperature measurement. Featuring a 240x320 pixel display and 120x90 IR resolution, it provides accurate thermal imaging for various applications, including electrical inspections, HVAC diagnostics, and general industrial maintenance. This manual provides essential information for the safe and effective use of your thermal imager.
2. Product Components
Familiarize yourself with the different parts of your DT-874 thermal imager:

- USB Charging Interface: For connecting the device to a power source for charging or data transfer.
- LCD Color Screen: Displays thermal images, menus, and measurement data.
- Upper Indicating Button: Used for navigation within menus.
- Menu - OK Button: Accesses the main menu and confirms selections.
- Lower Indicating Buttons: Used for navigation within menus.
- Battery: Rechargeable power source for the device.
- Power/Return Button: Turns the device on/off and returns to the previous screen.
- Infrared Lens: Captures thermal radiation.
- Flashlight: Provides illumination for visible light inspection.
- Trigger: Activates thermal image capture or measurement.
3. Setup
3.1 Charging the Battery
Before initial use, ensure the thermal imager's battery is fully charged.
- Locate the USB charging interface (1) on the device.
- Connect the provided Type-C USB cable to the interface and a suitable USB power adapter (not included).
- The charging indicator will show the charging status. Allow sufficient time for a full charge.
3.2 Powering On/Off
To power on the device, press and hold the Power/Return button (7) until the LCD screen (2) illuminates. To power off, press and hold the same button until the screen turns off.
4. Operating Instructions
4.1 Basic Thermal Imaging
- Ensure the device is powered on.
- Point the infrared lens (8) towards the target area you wish to inspect.
- The thermal image will be displayed on the LCD color screen (2). The device features a focus-free lens for ease of use.
- Press the trigger (10) to capture a thermal image.

4.2 Menu Navigation and Settings
Use the Menu - OK button (4) to access the main menu. The Upper (3) and Lower (5) indicating buttons are used to navigate through menu options. Press the Menu - OK button again to select an option or the Power/Return button (7) to go back.
4.3 Color Palettes
The DT-874 offers 5 different color palettes to visualize thermal data. These include IRON, RainBow, Grey, GreyInverted, and Brown. You can select the most suitable palette from the menu to enhance contrast and detail for specific applications.
4.4 High Temperature Alarm
The device includes a high-temperature alarm feature, with a default setting of 37.3°C. This can be adjusted in the settings menu to alert users when a measured temperature exceeds a predefined threshold.
4.5 Auto Fusion Mode (AUF)
The thermal imager supports an Auto Fusion mode, which combines thermal and visible light images to provide a more detailed and contextual view of the inspected area. This feature can be enabled or disabled via the menu.

5. Maintenance
5.1 Cleaning the Device
- Use a soft, dry cloth to clean the exterior of the thermal imager.
- For the infrared lens (8) and LCD screen (2), use a lens cleaning cloth and a specialized lens cleaning solution to avoid scratches. Do not use abrasive cleaners or solvents.
- Ensure no moisture enters the device, especially through the USB charging interface.
5.2 Battery Care
- Charge the battery regularly, even if the device is not in frequent use, to maintain battery health.
- Avoid exposing the device to extreme temperatures, which can degrade battery performance.
- If storing the device for an extended period, ensure the battery is charged to approximately 50%.
5.3 Storage
Store the thermal imager in a cool, dry place, away from direct sunlight and corrosive materials. Keep it in its protective casing when not in use to prevent damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low or depleted battery. | Charge the battery using the Type-C USB cable. |
| Thermal image is blurry or unclear. | Dirty infrared lens. | Clean the infrared lens with a soft, lint-free cloth. |
| Inaccurate temperature readings. | Incorrect emissivity setting (if adjustable). Distance to target too far. | Check and adjust emissivity in settings if applicable. Ensure appropriate distance to target. |
| Screen frozen or unresponsive. | Software glitch. | Perform a soft reset by holding the Power/Return button until the device restarts. |
7. Specifications
| Feature | Detail |
|---|---|
| Theory | Thermometer |
| Place of Origin | Mainland China, Guangdong |
| Warranty | 1 Year |
| Customized Support | OEM, ODM, OBM |
| IR Resolution | 120x90 pixels (10800 pixels) |
| Brand Name | CEM |
| Model Number | DT-874 |
| Thermal Color Palettes | 5 (IRON, RainBow, Grey, GreyInverted, Brown) |
| Temperature Control Accuracy | ±0.5°C (±0.9°F) in 32°C to 42°C; ±2°C (±3.6°F) or |
| Temperature Range | -20°C to 400°C |
| Material | PLASTIC+PCB |
| Type | Thermal Imager |
| Field of View | 21x 21° |
| Spatial Resolution | 4.53mrad |
| NETD | <0.1℃@30℃(80℉)/100mK |
| Image Frequency | 25Hz |
| Focus Mode | Focus free |
| Focal Plane Array (FPA) Spectral Range | Uncooled microbolometer/8-14um |
| Visible Camera | 2M pixels |
| High Temperature Alarm Setting | Default 37.3°C |
| Display | 240x320 2.4" LCD |
| Drop Test Resistance | 2m |
| IP Rating | IP54 |
| Interface | Type-C USB |
8. User Tips
- For best results, ensure there are no obstructions between the imager and the target.
- Experiment with different color palettes to find the one that best highlights the temperature differences for your specific application.
- Keep the lens clean to ensure clear and accurate thermal images.
- Utilize the Auto Fusion mode to get a clearer understanding of the thermal anomalies in context with the visible light image.
9. Warranty and Support
The CEM DT-874 Industrial Thermal Imager comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or service inquiries, please contact your authorized CEM dealer or the manufacturer directly. Please retain your proof of purchase for warranty validation.