1. Introduction
The HIROYASU HI-UV850Pro is a versatile multi-band handheld radio designed for amateur radio enthusiasts and professionals. It features FM, AM, and SSB modulation, wide frequency coverage, GPS and APRS capabilities, Bluetooth programming, and a robust 10W output power. This manual provides detailed instructions for setting up, operating, and maintaining your HI-UV850Pro radio.
2. Package Contents
Before you begin, please check the package for the following items:
- 1 × HIROYASU HI-UV850Pro Radio Body
- 1 × 7.4V 2600mAh Li-ion Type-C Rechargeable Battery Pack
- 1 × SMA-Female FM/136-174/400-470MHz High Gain Antenna
- 1 × Desktop Charger
- 1 × Type-C Charging Cable
- 1 × AC Adapter
- 1 × Belt Clip
- 1 × Hand Strap
- 1 × English User Manual
- 1 × USB Programming Cable (Optional)
- 1 × Speaker Microphone (Optional)
Video: Unboxing and initial assembly of the HIROYASU HI-UV850Pro radio, demonstrating included accessories and basic setup.
3. Product Overview
Familiarize yourself with the main components and controls of your HI-UV850Pro radio:

Figure 3.1: HI-UV850Pro Labeled Components. Key components include the Channel Knob, Power Switch/Volume Knob, Indicator Light, Display Screen, Accessory Interface, Interface Cover Screw, PTT A/B/C Buttons, MIC, Side Key 2, Speaker, Function Keypad, and Numeric Keypad.
4. Initial Setup
4.1. Attaching the Battery
- Align the battery pack with the grooves on the back of the radio.
- Slide the battery pack upwards until it clicks into place.
- To remove, press the release latch and slide the battery downwards.

Figure 4.1: 2600mAh Type-C Li-ion Battery Pack. Ensure proper alignment and secure attachment.
4.2. Attaching the Antenna
- Screw the SMA-Female antenna clockwise onto the antenna connector on top of the radio until it is finger-tight. Do not overtighten.
4.3. Charging the Battery
- Connect the AC adapter to the desktop charger.
- Place the radio with the battery attached into the desktop charger.
- The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
- Alternatively, the battery pack features a Type-C charging port for direct charging using a compatible Type-C cable and adapter.
5. Basic Operation
5.1. Power On/Off
Rotate the Power Switch/Volume Knob clockwise to turn the radio ON. Rotate it counter-clockwise until a click is heard to turn the radio OFF.
5.2. Adjusting Volume
Rotate the Power Switch/Volume Knob clockwise to increase the volume and counter-clockwise to decrease it.
5.3. Channel/Frequency Selection
Use the Channel Knob on top of the radio or the Up/Down arrow keys on the keypad to change channels or frequencies. The 2.4-inch full-color display will show the current frequency/channel information.
5.4. Transmitting and Receiving
To transmit, press and hold the PTT (Push-To-Talk) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to receive.
6. Advanced Features
6.1. Multi-Band Operation and Modulations
The HI-UV850Pro supports a wide range of frequencies and modulation types:
- FM (Frequency Modulation): 64-108MHz (Receive), 27MHz (Tx/Rx), 49-53MHz (Tx/Rx), 136-174MHz (Tx/Rx), 400-520MHz (Tx/Rx)
- AM (Amplitude Modulation): 153-279KHz, 520-1710KHz, 2300-26100KHz (Receive)
- SSB (Single Sideband): 150-30000KHz (Receive)
- Receiving Modes: FM/AM/LSB/USB/CW
6.2. GPS Positioning & APRS
The radio features built-in GPS for location tracking and APRS (Automatic Packet Reporting System) for real-time exchange of information over amateur radio frequencies.

Figure 6.1: GPS Positioning & APRS Display. The radio shows current coordinates and APRS status.
6.3. Mobile APP Bluetooth Wireless Program
Program your radio conveniently using a mobile application via Bluetooth. This allows for easy management of channels, frequencies, and other settings.

Figure 6.2: Mobile App Programming. Connect your radio to a smartphone via Bluetooth to customize settings.
6.4. Cross Band Repeater
The Cross Band Repeater function allows the radio to re-transmit signals received on one band to another band, extending communication range.

Figure 6.3: Cross Band Repeater in action. Signals are relayed between different frequency bands.
6.5. Frequency Sweep (Fast Channel Copy)
Quickly copy a channel from another radio by using the frequency sweep function. This feature allows for instant replication of frequency settings.

Figure 6.4: Frequency Sweep. Copy channels from another radio instantly.
6.6. Other Key Features
- 990 Memory Channels: Organize your communications with 10 zones, each containing up to 99 channels.
- 10W Output Power: Provides strong and clear transmissions over long distances.
- Tri-Band Display, Tri-band Watch, Tri-PTT Design: Monitor multiple bands simultaneously and use dedicated PTT buttons for different bands.
- 8 Groups of Scramblers: Enhance communication privacy with various scrambling options.
- Integrated Spectrum Analyzer: Real-time signal analysis helps monitor and optimize frequency usage efficiently.
- 1000/1450/1750/2100Hz Repeater Burst Tone: Access repeaters with ease using configurable burst tones.
- 10 NoAA Weather Forecast Channels: Stay informed with weather alerts and forecasts.
- DTMF Signaling: For advanced control and communication features.
- Self-definition Keys: Customize buttons for quick access to frequently used menu functions.
- VOX (Voice-operated Transmission): Hands-free operation by transmitting when voice is detected.
- SOS Modes: Three emergency modes (On site/Send Sound/Send Code) for critical situations.
- Mic Gain Adjustment: Adjust microphone sensitivity with Low/Middle/High settings.
- Dynamic Signal Strength Meter Display: Visual representation of signal strength for optimal reception.

Figure 6.5: 10W Extra High Output Power. The display confirms the high power output.

Figure 6.6: 990 Memory Channels. Organize your channels into zones for easy access.

Figure 6.7: Tri-Band Display and PTT Buttons. Observe multiple frequencies and use dedicated PTTs.

Figure 6.8: 8 Groups of Scramblers. Configure scrambler settings for secure communication.

Figure 6.9: Spectrum Analyzer. Real-time signal analysis for efficient frequency monitoring.

Figure 6.10: Dynamic Signal Strength Meter. Visual feedback on signal quality.

Figure 6.11: Repeater Burst Tone. Select from 1000/1450/1750/2100Hz tones.

Figure 6.12: 10 NoAA Weather Forecast Channels. Access important weather information.

Figure 6.13: Self-definition Keys. Customize button functions for quick menu access.
7. Specifications
| General | |
|---|---|
| Freq Range | 108-136MHz Aviation Band Receive 27MHz Tx/RX FM Modulation 49-53MHz Tx/Rx 136-174MHz Tx/Rx 400-520MHz Tx/Rx SW:2.3-30MHz Rx MW:520-1710KHz Rx LW:153-279KHz Rx |
| Channel Capacity | 990 Memory Channels (10 zones, 99 channels per zone) |
| Channel Spacing (W/N) | Analog:25kHz/12.5kHz, Digital:12.5K |
| Voltage | 7.4V DC |
| Working Mode | Same Frequency simplex, different frequency simplex |
| Antenna | Removable Antenna |
| Frequency Stability | ±2.5ppm |
| Working Temperature | -20°c~60°c |
| Dimension | 160*65*45mm (Antenna Not included) |
| Weight | About 400g (Battery, Antenna, Clip included) |
| Transmitting | |
| Power | ≤10W |
| Modulation Mode | F3E |
| Maximum Deviation (W/N) | ≤5KHz/≤2.5KHz |
| SNR(W/N) | -45dB/-40dB |
| Tx Current | ≤3000mA |
| Receiving | |
| Sensitivity(W/N) | 0.22uV/0.25Uv 12dB SINAD |
| Inter Modulation (W/N) | 65dB/60dB |
| Audio Distortion | <5% |
| Audio Output Power | ≤1W(16ohm) |
| RX Current | ≤350mA |
| Standby Current | ≤100mA |
| Note: The above parameters are subject to change due to technical improvement without prior notice or liability. | |
8. Troubleshooting
If you encounter issues with your HI-UV850Pro, please refer to the following common problems and solutions:
- Radio won't power on: Ensure the battery is fully charged and correctly installed. Check the power switch.
- No reception/poor audio: Verify the antenna is securely attached. Check the selected frequency/channel and ensure it's active. Adjust the volume.
- Cannot transmit: Confirm the battery has sufficient charge. Ensure you are on a valid transmit frequency and not in a receive-only mode.
- Bluetooth connection issues: Make sure Bluetooth is enabled on both the radio and your mobile device. Ensure the mobile app is updated to the latest version.
- GPS not acquiring signal: Operate the radio in an open area with a clear view of the sky. Allow several minutes for initial satellite acquisition.
For more complex issues, please consult the full user manual (if available) or contact customer support.
9. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for handheld radios include:
- Always ensure your battery is fully charged before extended use.
- Keep the antenna clear of obstructions for optimal signal performance.
- Familiarize yourself with local regulations regarding radio frequency usage.
- Regularly check for firmware updates to ensure the best performance and features.
10. Safety Information
Please read and follow these safety precautions to prevent injury or damage to your radio:
- Do not operate the radio in explosive atmospheres (e.g., near flammable gas, dust, or powders).
- Do not expose the radio to extreme temperatures, direct sunlight, or excessive moisture.
- Use only approved batteries and chargers to avoid fire or explosion.
- Do not disassemble or modify the radio. Repairs should only be performed by qualified technicians.
- Keep the radio out of reach of children.
- Avoid prolonged exposure to high volume levels when using headphones to prevent hearing damage.
11. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the HIROYASU customer service directly. Keep your purchase receipt as proof of purchase.