1. Introduction
The Lincukoo Smart ZigBee3.0 Tiny Door/Window Sensor is a compact and efficient device designed to enhance your smart home security. It accurately detects the open or closed status of doors, windows, drawers, cabinets, and other entry points, sending instant notifications to your mobile phone. Its ultrathin design allows for discreet placement in narrow spaces. This sensor utilizes the latest Hall magnetic component for durability and supports integration with popular smart home platforms like Home Assistant and Ewelink via a Zigbee gateway.

2. Key Features
- Real-time Monitoring: Detects open/close status of doors, windows, drawers, and cabinets.
- Instant Notifications: Sends alerts to your mobile phone when status changes are detected.
- Compact Design: Ultrathin size (44x21x8mm) for placement in narrow or discreet locations.
- Durable Construction: Features a Hall magnetic component designed to withstand accidental impacts.
- Smart Home Integration: Supports linkage with other smart devices through a Zigbee gateway.
- Platform Compatibility: Specifically designed for Home Assistant and Ewelink platforms (HZ Version).
- Zigbee 3.0 Protocol: Ensures reliable and efficient communication within your smart home network.
- Low Battery Alarm: Provides app notifications for low battery status.

3. Specifications
| Feature | Detail |
|---|---|
| Version | HZ |
| Platform Support | Home Assistant, Ewelink |
| Transmission Protocol | Zigbee 3.0 |
| Zigbee to MQTT Support | Yes |
| Transmission Distance (Max) | 30 meters |
| Battery | 2 * CR1632 (built-in) |
| Low Battery Alarm | App notification |
| IP Grade | IP64 |
| Size | 44mm * 21mm * 8mm |
| Weight | 14g (includes battery and magnet) |
| Installation Method | Double-sided tape |
| Certification | CE, RoHS, FCC |

4. Package Contents
Your package should contain the following items:
- Lincukoo Smart ZigBee3.0 Tiny Door/Window Sensor (main unit)
- Magnetic component
- Pre-installed 2 * CR1632 batteries
- Double-sided adhesive tape for installation
- User Manual (this document)
5. Setup Instructions
Important Note: The HZ version of this sensor requires a Zigbee gateway and is designed for use with Home Assistant or Ewelink platforms. Ensure you have a compatible Zigbee gateway set up before proceeding.

5.1. Pairing with a Zigbee Gateway
- Ensure Gateway is Ready: Make sure your Zigbee gateway (e.g., Home Assistant or Ewelink compatible gateway) is powered on and in pairing mode. Refer to your gateway's manual for specific instructions on enabling pairing mode.
- Power On Sensor: The sensor comes with pre-installed batteries. If not already active, you may need to remove a battery isolation tab or press a reset button (if available) to power it on.
- Initiate Pairing: Follow the instructions provided by your Home Assistant or Ewelink application to add a new Zigbee device. This usually involves searching for new devices.
- Activate Sensor for Pairing: While the gateway is searching, you might need to briefly separate and rejoin the two parts of the sensor (main unit and magnet) or press a small button on the sensor (if present) to send a pairing signal.
- Confirmation: Once successfully paired, the sensor should appear in your Home Assistant or Ewelink application. You may need to rename it for easy identification (e.g., "Front Door Sensor").
5.2. Physical Installation
- Choose Location: Identify the door, window, drawer, or cabinet you wish to monitor. Ensure the surfaces are clean and dry.
- Positioning: The sensor consists of two parts: a main unit and a smaller magnetic component. These two parts must be aligned with each other and placed on the moving part and the fixed frame, respectively. The gap between the two parts should be minimal (typically less than 10-15mm when closed) for proper detection.
- Attach with Tape: Peel off the protective backing from the double-sided adhesive tape and firmly press each part of the sensor onto the chosen surfaces. Hold for a few seconds to ensure a strong bond.
- Test Installation: Open and close the monitored object (door, window, etc.) and verify that the sensor's status changes correctly in your Home Assistant or Ewelink application.

6. Operation
Once installed and paired, the Lincukoo Door/Window Sensor operates automatically.
6.1. Status Detection
- When the two parts of the sensor are close together (e.g., door closed), the sensor reports a 'Closed' status.
- When the two parts are separated (e.g., door opened by more than 10-15mm), the sensor reports an 'Open' status.
6.2. Mobile Notifications
If configured in your Home Assistant or Ewelink application, you will receive push notifications on your mobile device whenever the sensor's status changes (e.g., "Front Door Opened").

6.3. Smart Linkage
Through your Zigbee gateway and smart home platform, you can create automation rules based on the sensor's status. Examples include:
- Turning on lights when a door opens.
- Activating a security camera when a window is opened unexpectedly.
- Triggering an alarm siren.
7. Maintenance
7.1. Battery Replacement
The sensor uses two CR1632 batteries. When the battery level is low, you will receive an app notification. To replace the batteries:
- Gently pry open the sensor casing.
- Remove the old CR1632 batteries.
- Insert new CR1632 batteries, ensuring correct polarity.
- Close the sensor casing securely.

7.2. Cleaning
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as this may damage the device.
8. Troubleshooting
- Sensor not pairing:
- Ensure your Zigbee gateway is in pairing mode and within range. Check if the sensor batteries are correctly installed and have sufficient charge. Try resetting the sensor (if a reset button is present, consult the product packaging or manufacturer's website for details) and re-attempt pairing.
- No notifications received:
- Verify that notifications are enabled in your Home Assistant or Ewelink application settings. Check your phone's notification settings for the app. Ensure the sensor is properly paired and reporting status changes in the app. Confirm your internet connection is stable.
- Sensor status not updating:
- Check the alignment and proximity of the two sensor parts. The gap should be less than 10-15mm when closed. Ensure the sensor is within the effective range of your Zigbee gateway. Replace batteries if they are low.
- Sensor fell off:
- The sensor uses a Hall magnetic component for durability. Re-attach using new double-sided adhesive tape on a clean, dry surface. Ensure proper alignment.
9. User Tips
- Battery Life: While the sensor uses CR1632 batteries, actual battery life can vary depending on usage frequency and environmental factors. Monitor the low battery notifications in your app to ensure timely replacement.
- Gateway Importance: Remember that this HZ version sensor requires a Zigbee gateway to function. It cannot connect directly to Wi-Fi.
- Optimal Placement: For best performance, ensure the two sensor parts are as close as possible when the door/window is closed, ideally within 5mm, and definitely no more than 15mm.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Lincukoo website or contact your retailer. Keep your proof of purchase for warranty claims.