DIVEDEER YTK-330

Contents

DIVEDEER YTK-330 Smart Window Cleaning Robot

Model: YTK-330 | Brand: DIVEDEER

Your guide to effortless window cleaning.

1. Introduction

The DIVEDEER YTK-330 is an intelligent, anti-fall window cleaning robot designed to simplify the task of cleaning glass surfaces. Utilizing advanced artificial intelligence technology, it offers efficient and thorough cleaning with minimal effort. This robot is suitable for various glass types, including single-layer, double-layer, and multi-layer glass, as well as bathroom mirrors and ceramic tiles.

The YTK-330 features a powerful suction system and intelligent path planning to ensure comprehensive coverage. It operates with a 'waterless' design, meaning it does not have an internal water tank or spray function. Users are expected to apply cleaning solution directly to the cleaning cloths before operation.

This manual provides detailed instructions for the safe and effective use of your DIVEDEER YTK-330 window cleaning robot.

2. Safety Information

IMPORTANT: Please read all safety instructions carefully before using the device.

  • The robot requires a continuous power connection to function. It is not designed to operate unplugged after charging.
  • Before first use, charge the robot for at least 2 hours. This initial charge helps prevent the robot from falling immediately in case of a sudden power outage during operation.
  • Always ensure the robot is powered on and securely attached to the glass before releasing it.
  • The robot is equipped with a 20-minute UPS (Uninterruptible Power Supply) to prevent falls during power outages. This allows time to safely retrieve the robot.
  • Always attach the safety rope component to a secure anchor point before placing the robot on the window. The safety rope has a load-bearing capacity of 50KG.
  • Do not use the robot on cracked or damaged glass surfaces.
  • Keep hands, hair, and loose clothing away from moving parts during operation.
  • This robot is designed for waterless operation. Do not pour water or cleaning solution directly into the robot. Apply solution only to the cleaning cloths.
  • Supervise the robot during operation, especially when used on high or difficult-to-reach windows.
DIVEDEER YTK-330 robot with safety rope attached to a heavy weight, demonstrating its 50KG load-bearing capacity and UPS power supply.
The robot features multiple protection mechanisms, including a 50KG load-bearing safety rope and a 20-minute UPS power supply for safety during operation.

3. Package Contents

Please check the package for the following items:

Contents of the DIVEDEER YTK-330 package: robot, remote control, instruction manual, spray bottle, 16 cleaning cloths, 4 cleaning rings, power adapter, safety rope component, and power cord.
All components included in the DIVEDEER YTK-330 package.
  • DIVEDEER YTK-330 Window Cleaning Robot x1
  • Remote Control x1
  • Instruction Manual x1
  • Spray Bottle x1
  • Cleaning Cloth x16
  • Cleaning Ring x4
  • Power Adapter x1
  • Safety Rope Component x1
  • Power Cord x1

4. Product Overview

Familiarize yourself with the main components of your DIVEDEER YTK-330 robot:

Diagram of the DIVEDEER YTK-330 robot with labeled parts: Remote control Receiving Window, Work indicator light, Start button, Power cord interface, and Safety rope attachment point.
Key components of the DIVEDEER YTK-330 Window Cleaning Robot.
  • Remote Control Receiving Window: Receives signals from the remote control.
  • Work Indicator Light: Displays the robot's current status (e.g., power on, cleaning, error).
  • Start Button: Powers the robot on/off and initiates cleaning.
  • Power Cord Interface: Connects the robot to the power adapter and cord.
  • Safety Rope Attachment Point: Where the safety rope is securely fastened to the robot.
  • Cleaning Pads: Two rotating pads on the underside for attaching cleaning cloths.

5. Specifications

Technical specifications for the DIVEDEER YTK-330 Smart Window Cleaning Robot:

Table of parameter information for the DIVEDEER YTK-330 robot.
Detailed parameter information for the YTK-330 robot.
Parameter Value
Product Dimension 295 x 145 x 108 mm
Input Voltage AC110-240V~50/60Hz
Adapter Voltage 24V, 3.75A
Rated Power 72W
Suction Force 2800Pa
Motor Type Brush
Noise Level 68 dB
Cleaning Speed 4 mins/m²
Built-in Battery 500mAh
Control Mode Infrared Remote Control
Edge Detection Automatic (frame glass)
Cleaning Modes 3 types
Features Round type, Without water spray

6. Setup

  1. Initial Charging: Upon receiving the robot, connect it to the power adapter and power cord. Charge the robot for a minimum of 2 hours before its first use. This ensures the internal battery is sufficiently charged to act as a backup in case of power interruption.
  2. Attach Cleaning Rings and Cloths: Place the cleaning rings onto the two rotating pads on the underside of the robot. Then, firmly attach a clean microfiber cleaning cloth to each ring, ensuring they cover the entire pad surface.
  3. Connect Power: Connect the power cord to the power adapter, and then connect the adapter to the robot's power interface. Plug the power cord into a suitable electrical outlet.
  4. Attach Safety Rope: Securely attach the safety rope component to the designated attachment point on the robot. Fasten the other end of the safety rope to a sturdy, immovable object indoors (e.g., a heavy piece of furniture, a window frame anchor) to prevent the robot from falling in case of suction loss.
  5. Prepare Cleaning Cloths: Lightly spray a small amount of glass cleaning solution onto the cleaning cloths. Do not oversaturate the cloths, and do not spray directly onto the robot or the window.

7. Operating Instructions

The DIVEDEER YTK-330 can be operated via its onboard start button or the included infrared remote control.

7.1 Power On and Placement

  1. Ensure the robot is connected to power and the safety rope is secured.
  2. Press the Start button on the robot or the power button on the remote control to turn it on. The work indicator light should illuminate.
  3. Carefully place the robot onto the glass surface. Ensure both cleaning pads make full contact with the glass. The robot will automatically create suction and adhere to the window.
  4. Once the robot is securely attached, you can initiate cleaning.
A hand pressing the start button on the DIVEDEER YTK-330 robot while it is attached to a window, illustrating the one-click start feature.
One-click start for convenient and fast operation.

7.2 Cleaning Modes and Remote Control

The robot offers three cleaning modes and can be controlled using the remote:

Two diagrams showing the robot's cleaning paths: one starting left and moving down, the other starting right and moving down.
Automatic cleaning paths: left-then-down and right-then-down.
  • Automatic Mode: Press the 'OK' button on the remote or the Start button on the robot to begin automatic cleaning. The robot will detect the window edges and plan an optimal path.
  • Left-then-Down Cleaning: The robot starts cleaning from the top-left corner, moving horizontally then downwards.
  • Right-then-Down Cleaning: The robot starts cleaning from the top-right corner, moving horizontally then downwards.
  • Remote Control: Use the directional arrows on the remote to manually guide the robot if needed. The 'STOP' button will pause or stop the cleaning cycle.
  • The robot performs automatic wiping twice for a thorough clean, utilizing its dual wheels to evenly absorb dirt.

7.3 Finishing Cleaning

  1. Once cleaning is complete, the robot will return to its starting position or stop.
  2. Carefully grasp the robot, then press the Start button or the power button on the remote to release the suction.
  3. Remove the robot from the glass.
  4. Disconnect the power cord and safety rope.

8. Maintenance

Regular maintenance ensures optimal performance and longevity of your window cleaning robot.

8.1 Cleaning Cloths

Close-up of the 5-layer fine fiber cleaning cloth, highlighting its ability to dissolve dust, sand, water stains, dirt, mud, and bird droppings.
The 5-layer fine fiber cleaning cloth effectively locks in stains and removes dirt.
  • The robot uses 5-layer fine fiber cleaning cloths, designed to effectively lock in stains and remove dirt.
  • After each use, remove the cleaning cloths from the robot.
  • Wash the cloths with water and a mild detergent. They are reusable and durable.
  • Allow the cloths to air dry completely before storing or reusing.
  • Replace cleaning cloths if they become worn, torn, or no longer clean effectively.

8.2 Robot Body

  • Wipe the robot's body with a soft, dry cloth to remove any dust or residue.
  • Do not use abrasive cleaners or solvents on the robot.
  • Ensure the suction pads and sensors are clean and free from debris for optimal performance.

9. Troubleshooting

If you encounter issues with your DIVEDEER YTK-330, please refer to the following common problems and solutions:

Problem Possible Cause Solution
Robot does not stick to the window or falls off.
  • Not connected to power.
  • Insufficient initial charge.
  • Glass surface is too dirty or wet.
  • Cleaning cloths are too wet or dirty.
  • Suction pads/sensors are obstructed.
  • Ensure the robot is continuously connected to a power source during operation.
  • Charge the robot for at least 2 hours before first use.
  • Clean the glass surface of large debris before robot use. Ensure cloths are damp, not soaking wet.
  • Replace with clean, slightly damp cloths.
  • Clean the suction pads and sensors on the robot.
Robot does not move or stops during cleaning.
  • Power interruption.
  • Obstruction on the window.
  • Cleaning cloths are too dry or dirty.
  • Check power connection. The UPS will provide backup power for 20 minutes.
  • Remove any obstacles from the cleaning path.
  • Ensure cleaning cloths are adequately damp with cleaning solution.
Cleaning results are unsatisfactory.
  • Cleaning cloths are dirty or dry.
  • Incorrect cleaning solution used.
  • Heavy dirt on windows.
  • Replace with fresh, slightly damp cleaning cloths.
  • Use a recommended glass cleaning solution.
  • For very dirty windows, pre-clean manually or run the robot multiple times with fresh cloths.
Robot does not spray water. The YTK-330 model does not have a water tank or spray function. This is normal operation. Apply cleaning solution directly to the cleaning cloths before use.

10. User Tips

  • For best results, use the robot on windows that are not excessively dirty. For heavily soiled windows, a preliminary manual wipe or a first pass with dry cloths might be beneficial.
  • Always ensure the safety rope is securely fastened to a stable object indoors before starting the robot.
  • Experiment with different glass cleaning solutions applied to the cloths to find what works best for your windows.
  • The robot is versatile and can be used on various smooth surfaces like bathroom mirrors and ceramic tiles, not just windows.

11. Warranty and Support

For any product damage or quality issues upon receipt, please contact customer service immediately. Provide your order number and a complete unboxing video to facilitate a quick resolution.

Please refer to your purchase documentation or contact the seller for specific warranty terms and conditions. Do not attempt to disassemble or repair the robot yourself, as this may void the warranty and pose safety risks.

Thank you for choosing DIVEDEER. We appreciate your patience and understanding.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.