1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your A-BF Programmable Linear DC Stabilized Power Supply. This high-precision device is designed for various electrical and DIY applications, offering stable and adjustable voltage and current outputs. Please read this manual thoroughly before use and keep it for future reference.
2. Key Features
- High-precision linear DC stabilized output.
- Programmable voltage and current settings.
- Color screen display for enhanced readability (on select models).
- Fine adjustment capabilities for voltage (1mV) and current (0.1mA or 0.01mA).
- Multiple protection functions (e.g., OVP, OCP - Over Voltage Protection, Over Current Protection).
- Intuitive control panel with numeric keypad and rotary encoder.
3. Models and Specifications
The A-BF SS-L series includes several models with varying voltage and current capabilities. Below is a summary of common specifications:
| Model | Output Voltage Range | Output Current Range | Display Type | Precision |
|---|---|---|---|---|
| SS-L303SP / SS-L303SPL | 0-30V | 0-3A | LCD Blue / Color | 1mV, 0.1mA |
| SS-L305SP / SS-L305SPL | 0-30V | 0-5A | LCD Blue / Color | 1mV, 0.1mA |
| SS-L3010SP / SS-L3010SPL | 0-30V | 0-10A | LCD Blue / Color | 1mV, 0.1mA |
| SS-L605SP / SS-L605SPL | 0-60V | 0-5A | LCD Blue / Color | 1mV, 0.1mA |
| SS-L1503SP / SS-L1503SPL | 0-150V | 0-3A | LCD Blue / Color | 1mV, 0.1mA |
| KPS3010D | 0-30V | 0-10A | 4-digit LED | High precision |
General Specifications:
- DIY Supplies: Electrical
- Origin: Mainland China
- Certification: None (Please refer to local regulations for specific application requirements)
4. Product Overview
Familiarize yourself with the main components and interface of your power supply.

Figure 4.1: Front panel of an A-BF Programmable Power Supply (SS-L3010SPL model shown) with color screen, displaying voltage, current, and power settings, along with function buttons (F1-F5), numeric keypad, and output terminals. Precision is indicated as 1mV 0.1mA / 0.1mV 0.01mA.

Figure 4.2: A-BF 6-digit high-precision linear power supply, showing the front panel with output terminals, sense terminals, and control buttons. The display shows voltage, current, and protection settings.

Figure 4.3: A-BF SS-L303SP model, featuring a 61x18mm LCD blue screen, with output specifications of 0-30V voltage and 0-3A current. This is a 5-digit high-precision linear DC power supply.

Figure 4.4: A-BF KPS3010D model, a 300W encoder digital control power supply. Dimensions are approximately 280mm (height), 88mm (width), and 180mm (depth). Output voltage is 0-30V and current is 0-10A.
Video 4.1: An overview demonstrating the features and user interface of the A-BF Programmable Power Supply.
5. Setup
- Unpacking: Carefully remove the power supply from its packaging. Inspect for any signs of damage.
- Placement: Place the unit on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for heat dissipation.
- Power Connection: Connect the power cord to the AC input on the rear of the unit, then plug it into a grounded power outlet. Ensure the power supply's voltage matches your local mains voltage.
- Output Connections:
- Connect the positive (+) terminal of your load to the red output terminal of the power supply.
- Connect the negative (-) terminal of your load to the black output terminal of the power supply.
- For models with sense terminals (SENSE+ and SENSE-), connect these to the load's positive and negative terminals respectively for improved regulation at the load.
- Initial Power On: Turn on the power switch. The display should illuminate.
6. Operation
6.1 Setting Voltage and Current
- Adjusting Voltage:
- Press the 'V-set' or 'Voltage' button to enter voltage setting mode.
- Use the rotary encoder or numeric keypad to adjust the desired voltage value.
- Press 'Enter' or the corresponding function button to confirm the setting.
- Adjusting Current:
- Press the 'I-set' or 'Current' button to enter current setting mode.
- Use the rotary encoder or numeric keypad to adjust the desired current limit.
- Press 'Enter' or the corresponding function button to confirm the setting.
- Output ON/OFF: Use the 'Output' or 'On/Off' button to enable or disable the power output to your load. Always set voltage and current limits before enabling output.
6.2 Protection Functions
The power supply includes several protection features:
- OVP (Over Voltage Protection): Automatically shuts off output if the voltage exceeds a preset limit.
- OCP (Over Current Protection): Automatically shuts off output if the current exceeds a preset limit.
- OTP (Over Temperature Protection): Protects the unit from overheating.
Refer to the display and specific function buttons (e.g., OVP, OCP) on your model to set and monitor these protections.
6.3 Programming and Storage
Some models allow for storing and recalling frequently used voltage/current settings.
- Store: Press the 'Store' button, select a memory location (e.g., 0-9), and press 'Enter' to save the current settings.
- Recall: Press the 'List/Run' or 'Recall' button, select the desired memory location, and press 'Enter' to load the saved settings.
7. Maintenance
- Cleaning: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure ventilation openings are clear of dust and obstructions to prevent overheating.
- Storage: When not in use for extended periods, store the unit in a dry, dust-free environment.
- Calibration: For professional applications requiring high accuracy, periodic calibration by qualified personnel is recommended.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/display | Power cord disconnected, power switch off, fuse blown. | Check power cord, turn on switch, replace fuse (if applicable and safe to do so). |
| No output voltage/current | Output disabled, OVP/OCP triggered, faulty connection. | Enable output, check OVP/OCP settings, verify load connections. |
| Unstable output | Poor load connection, excessive load, internal fault. | Check connections, reduce load, contact support if problem persists. |
| Overheating | Blocked ventilation, excessive ambient temperature, prolonged high load. | Ensure clear ventilation, operate in a cooler environment, reduce load. |
9. User Tips
No specific user tips were available from provided reviews or Q&A content. General tips for power supply usage include:
- Always connect the load before turning on the output.
- Start with lower voltage and current settings and gradually increase to the desired levels.
- Utilize the OVP and OCP features to protect your circuits and the power supply.
- Regularly check connections for tightness and proper polarity.
10. Warranty and Support
Specific warranty details are not provided in the available product information. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
For general inquiries, you may contact the seller via the following:
- Email: e13638406244@126.com
- WhatsApp: +8618711275411