1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your SAMOLLA Long Shot Spinning Reel. Designed for surf fishing and other demanding conditions, this reel features a robust construction and advanced winding mechanisms to enhance your fishing experience. Please read this manual thoroughly before using your reel to ensure optimal performance and longevity.

Figure 1: SAMOLLA Long Shot Spinning Reel, main view.
2. Key Features
- Worm Shaft Structure: Ensures dense and even line winding, reducing friction and increasing casting distance. This structure also makes line collection easier and provides greater strength.
- Strengthened Body: Designed for high strength, corrosion resistance, and the ability to withstand significant tensile forces.
- Anti-Entanglement Device: Effectively prevents line entanglement during casting and retrieval.
- Stainless Steel Spindle: A bold stainless steel spindle enhances the reel's overall strength and durability.
- Metal Handle: Features an all-metal rocker arm for robust and reliable operation.
- CNC Precision Machining: Spool and other components are CNC machined for high precision.
- Powerful Braking System: Capable of reaching a maximum drag of 25KG.
- Smooth Rotation: Unidirectional bearings provide smooth and delicate rotation.
- Infinite Anti-Reverse: Ensures immediate hook sets.
- Improved Sound Clicker: For clear drag sound.

Figure 2: Illustration of key features including tightly wound wires, worm shaft, and strengthened body.

Figure 3: Internal diagram highlighting the worm shaft structure for improved line winding and strength.

Figure 4: Close-up view of the anti-entanglement device on the reel spool.

Figure 5: Visual comparison of dense line winding with worm shaft structure versus messy winding with ordinary structure.

Figure 6: Exploded view showing key components: Aluminum alloy integrated body, bold stainless steel spindle, anti-entanglement device, CNC aluminum alloy large grip, CNC aluminum alloy large spool, and large multi-layer brake pads.
3. Specifications
The SAMOLLA Long Shot Spinning Reel is available in several models, each designed for specific fishing needs. Refer to the table below for detailed specifications.
| Model | Gear Ratio | Ball Bearings | Max Drag | Weight | Line Capacity (mm/m) |
|---|---|---|---|---|---|
| 8000 | 4.8:1 | 6+1 | 25KG | 630g | 0.35/230 0.4/170 0.5/120 |
| 9000 | 4.8:1 | 6+1 | 25KG | 615g | 0.35/310 0.4/240 0.5/150 |
| 10000 | 4.8:1 | 6+1 | 25KG | 596g | 0.35/550 0.4/420 0.5/270 |
| 12000 | 4.8:1 | 6+1 | 25KG | 595g | 0.35/750 0.4/600 0.5/390 |
| 14000 | 4.8:1 | 6+1 | 25KG | 590g | 0.35/950 0.4/790 0.5/590 |
General Dimensions:
- Width: 7.2 cm (2.83 in)
- Height: 14.3 cm (5.63 in)

Figure 7: Product specifications and general dimensions.
Spool Dimensions (Diameter x Height):
- BKM8000: 6.9cm (2.71in) x 3.7cm (1.45in)
- BKM9000: 6.6cm (2.59in) x 3.7cm (1.45in)
- BKM10000: 5.8cm (2.28in) x 3.7cm (1.45in)
- BKM12000: 5.1cm (2.00in) x 3.7cm (1.45in)
- BKM14000: 4.2cm (1.65in) x 3.7cm (1.45in)

Figure 8: Detailed spool dimensions for various models.
4. Setup
4.1 Attaching the Handle
The reel features a right/left interchangeable handle. To attach or change the handle side:
- Unscrew the cap on the side opposite to where you want the handle.
- Insert the handle shaft into the main gear opening on your preferred side.
- Screw the cap onto the opposite side to secure the handle.
Note: Some users have reported that the handle may only be threaded on one side, limiting true interchangeability. Please verify your specific reel model upon receipt.

Figure 9: Detail of the handle attachment mechanism.
4.2 Spooling Fishing Line
Properly spooling your fishing line is crucial for optimal casting and retrieval. The worm shaft structure of this reel is designed for dense and even line winding.
- Attach the reel to your fishing rod.
- Pass the line through the rod guides, starting from the tip.
- Tie the line to the reel spool using an arbor knot or similar secure knot.
- Close the bail.
- Begin winding the line onto the spool, maintaining light tension on the line to ensure it spools tightly and evenly.
- Fill the spool to about 1/8 inch (3mm) from the rim to prevent line overflow and tangles.

Figure 10: View of the reel spool, illustrating proper line winding.
5. Operating Instructions
5.1 Casting
- Hold the rod and reel comfortably.
- Open the bail arm.
- Use your index finger to hold the line against the rod.
- Swing the rod forward, releasing the line with your index finger at the peak of the cast.
- As the lure or bait hits the water, close the bail manually or by turning the handle.
5.2 Retrieval
- Turn the handle to retrieve the line.
- Adjust the drag system as needed to control the tension on the line, especially when fighting a fish.
- The infinite anti-reverse system ensures there is no back play in the handle, allowing for solid hook sets.
5.3 Drag Adjustment
The drag system is located on the front of the spool. Turn the drag knob clockwise to increase tension and counter-clockwise to decrease tension. Set the drag appropriately for the line strength and target fish to prevent line breakage and ensure smooth line release during a fight.
6. Maintenance
Regular maintenance is essential to prolong the life and performance of your SAMOLLA spinning reel. The following steps outline both daily and deep maintenance procedures.
6.1 Preparation
Tools: Soft cloth, cotton swabs, bearing oil, gear grease, cleaning agent, screwdriver, tweezers
Environment: Clean, well-lit, dust-free workspace
Prep: Remove fishing line, spool, and clean surface dirt.
6.2 Daily Basic Maintenance (After Each Use)
- Rinse the reel with clean fresh water to remove salt, sand, and dirt.
- Wipe the entire reel dry with a soft cloth.
- Remove the spool and air-dry the rotor and internal parts.
- Check the line roller, handle, and bail for smooth operation.
- Apply 1-2 drops of bearing oil to the line roller if stiff or noisy.
6.3 Full Deep Maintenance (Every 1-3 Months)
Step 1: Disassembly
- Unscrew the spool knob and remove the spool.
- Take off the handle, lock nut, and star drag/drag knob.
- Remove the rotor and side cover screws.
- Take out the gear set, bearings, and washers carefully.
Step 2: Cleaning
- Wipe old grease, dirt, and metal powder with a cloth and cotton swabs.
- Clean bearings with cleaning agent and let dry completely.
- Do not use strong solvents (gasoline, thinner).
Step 3: Lubrication
- Gears & main shaft: Apply proper gear grease.
- Bearings & line roller: Apply 1-2 drops of bearing oil.
- Drag washers: Lightly coat with special drag grease if needed.
- Do NOT overlubricate; excess oil attracts dust.
Step 4: Reassembly & Adjustment
- Reinstall all parts in reverse order.
- Tighten screws moderately (do not over-tighten).
- Adjust the drag system to ensure even tension.
- Test rotation, handle, and bail action.
6.4 Maintenance Frequency
- Occasional freshwater use: every 2-3 months
- Frequent fishing: every 1 month
- Saltwater/beach fishing: clean after every use, full maintenance monthly
6.5 Important Warnings
- After saltwater use, rinse immediately to prevent rust.
- Do not disassemble parts you are not familiar with.
- Keep bearings away from dust and water during cleaning.
- Replace worn drag washers, bearings, or gears in time.
- Store the reel in a cool, dry place.
For a printable PDF version of the maintenance manual, please refer to the official product page or contact customer support.
Reference PDF: Spinning Reel Maintenance Manual (PDF)
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reel feels stiff or noisy | Lack of lubrication, dirt/salt buildup in bearings or line roller. | Perform daily or deep maintenance. Clean and lubricate bearings and line roller. |
| Line entanglement or uneven winding | Improper spooling, worn line roller, or debris in the line path. | Re-spool line with proper tension. Check line roller for smooth operation and clean if necessary. Ensure anti-entanglement device is clear. |
| Drag not holding tension | Worn or dirty drag washers, improper adjustment. | Clean and lubricate drag washers. Adjust drag knob to desired tension. Replace worn drag washers if necessary. |
| Handle not interchangeable (despite claims) | Manufacturing variation or specific model design. | Confirm handle threading. If only one side is threaded, the handle is fixed to that side. This is a known issue for some units. |
8. User Tips
- Many users praise the reel for its solid construction and strong drag, especially considering its price point.
- The clutch system is reported to hold well, providing reliable performance during retrieves and fights.
- While the reel is generally sturdy, some users have expressed concerns about the long-term durability of the plastic handle components. Regular inspection and maintenance of the handle are recommended.
- The spool is noted to be quite large, even for models like the 10000 series, which can be beneficial for increased line capacity.
- Always check the handle's interchangeability upon receipt, as some units may not support true left/right conversion despite product descriptions.
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. For technical support or inquiries, please reach out to SAMOLLA customer service through the official channels.