Dooya DVQ24 Tubular Motor User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Dooya DVQ24 Tubular Motor. This motor is designed for automating various types of blinds, including aluminum venetian blinds, Roman blinds, and honeycomb canopy blinds. It supports control via an optional Tuya WiFi or Zigbee module, enabling smart home integration.

2. Safety Notes

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• WARNING: The drive shall be disconnected from its power source during cleaning, maintenance and when replacing parts.
• Watch the moving shutter and keep people away until the shutter is completely closed.
• WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.
• Before installing the drive, remove any unnecessary cords and disable any equipment not needed for powered operation.
• The instructions shall state that the A-weighted emission sound pressure level of the drive is equal to or less than 70 dB(A), e.g. by writing LpA ≤ 70 dB(A).
• The mass and the dimension of the driven part shall be compatible with the rated torque and rated operating time.
• The type of driven part the drive is intended for.
• WARNING: Important safety instructions. It is important for the safety of persons to follow these instructions. Save these instructions.
• Do not allow children to play with fixed controls. Keep remote controls away from children.
• Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.

3. Product Overview and Components

The Dooya DVQ24 Tubular Motor is a versatile solution for automating various window coverings. It features a built-in receiver and supports smart control via Tuya modules.

Functional Features:

• Electronic Limit
• Memorized Settings
• Jog & Tilt
• Stall Protection
• Unpair Single Emitter
• Low Power Consumption, Suitable for External Battery Power
• Built-in Receiver
• Dual Shaft
• Preferred Stop Position
• Program Button
• Low Noise
• Quick Limit Adjustment

Package Contents:

The package typically includes the DVQ24 tubular motor, a power adapter, and an optional Tuya WiFi or Zigbee module. Brackets are selected based on the type of blinds.

4. Installation

The DVQ24 motor is designed for integration into various blind systems. Ensure you select the correct bracket type for your specific blinds (Bracket A, B, or C).

Motor Installation:

1. Connect the signal line and power line to the motor as shown in the diagram.
2. Insert the motor into the blind's headrail.
3. Secure the motor using the appropriate brackets for your blind type.

Blind Assembly (Example: Venetian Blinds):

The motor integrates with the rope winder and wall bracket to control the venetian blinds.

Bracket Selection:

• Bracket A (3.3cm*2.9cm): For special tracks of Yamu Brand.
• Bracket B (2.5cm*2.6cm): Commonly used for Roman Blinds and aluminum venetian blinds, depending on track size.
• Bracket C (2.5cm*2.5cm): For honeycomb canopy blinds.

5. Operation

The motor can be operated via a remote control (if included) or through the Tuya app when the module is connected.

General Operation Notes:

• For the first time with a battery type motor, please charge it before using it.
• Do not operate motors when low voltage: Motor stops running when the supply voltage is lower than 8V, and it will restart again when the voltage is greater than 8.5V.
• Set limit position: The up/down limit position can't be at the same position. After limit setting, with power off and memory function. It will delete every memory and restore the factory settings. Into the match-code status 2 minutes later, it will quit the setting limits status automatically.
• The motor will run for hint, please do the next step after the hint.
• When the motor is running without any operation, the maximum running time is 6 minutes, it will stop automatically.
• If the emitter is lost, please set up again with the new emitter.

Button Specification:

Setting Up (Pairing):

To switch the transmitter to control the motor rotation direction, perform the reverse operation. If the motor has to code, it is not necessary to perform power-on and power-off coding. After successfully deleting original limit settings and motor speed mode settings, restore factory values.

Limit Position Setting:

The motor allows setting upper and lower limits for the blinds' travel.

Preferred Stop Position:

After setting the up and down limit, you can set a preferred stop position between them, such as a half-open position.

Fine-tuning Up/Down Limit Position:

After the motor runs to the up/down limit, fine adjustment can be performed. When fine-tuning the limit, press the up/down button, the motor jog-moves. Long press the button for continuous movement, loosen to stop.

Jog-move Dimming Function:

This function allows for precise adjustments to the blind's position.

Add Emitter:

An emitter (remote control) can be added to control the motor.

Delete Emitter:

Individual or all emitters can be deleted from the motor's memory.

Switch Direction:

The motor's rotation direction can be reversed if needed.

Reset to Factory Mode:

This operation will delete all previous system function settings and emitter codes.

Speed Regulation:

The motor's running speed can be adjusted.

Charging Instructions:

For battery-powered versions, use the provided 12V adapter for charging.

6. Troubleshooting

Refer to the table below for common issues and their solutions.

7. Specifications

Detailed parameters for the DVQ24 motor series.

Physical Dimensions:

8. User Tips

No specific user tips were available from provided reviews or Q&A content.

9. Warranty and Support

For warranty information or technical support, please contact your seller or refer to the official Dooya website. Ensure you have your product model number (DVQ24AF/P-0.8/34) ready when seeking support.