Introduction
Thank you for choosing the DIVEDEER Automatic Home Oil Press, Model X6. This appliance is designed for efficient and convenient extraction of oil from various seeds and nuts in your home. With its intelligent control and robust stainless steel construction, it provides a reliable solution for fresh, homemade oil. Please read this manual thoroughly before operation to ensure safe and optimal use of your oil press.
Important Safety Instructions
- Always ensure the appliance is placed on a stable, level, and heat-resistant surface.
- Do not immerse the main unit in water or any other liquid.
- Keep hands, hair, and loose clothing away from moving parts during operation.
- Ensure the power cord is not damaged and is properly connected to a suitable power outlet (220V, 110V customizable).
- Do not operate the machine if any parts are damaged or missing.
- Keep out of reach of children and pets.
- Allow the machine to cool down completely before cleaning or disassembling.
- Use only original accessories and replacement parts.
- Ensure adequate ventilation during operation as the machine generates heat.
- In case of a malfunction or unusual noise, immediately switch off and unplug the machine.
Product Overview and Components
The DIVEDEER X6 oil press features an intelligent control panel and an expandable design for easy cleaning. Key components are made from durable stainless steel.
Figure 1: Intelligent Control Panel
Control Panel Functions:
- Temperature Controller: Displays real-time and set temperatures. Use 'RAISE' and 'LOWER' buttons to adjust the set temperature.
- Heating Count Down: Shows the remaining time for preheating. Displays '---' when finished.
- POWER: Turns the machine on/off.
- PRESS/STOP: Starts or stops the oil pressing process.
- CLEAR: Used to separate the squeezing chamber and rod after pressing.
- Reversal: Activates automatic reversal if foreign objects are detected during pressing.
Figure 2: Product Accessories List
Accessories Included:
- Hopper
- Oil cup
- Strainer
- Cleaning Brush
- Oven Mitt
- Pressing chamber and rod
- Slag guide bend pipe
- Power line
Setup Instructions
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the main unit on a stable, level, and heat-resistant surface, ensuring sufficient space around for ventilation.
- Assemble Pressing Components: Attach the pressing chamber and rod to the main unit. Ensure they are securely fastened.
- Install Hopper: Place the hopper on top of the pressing chamber.
- Position Oil Cup and Slag Guide: Place the oil cup under the oil outlet and the slag guide bend pipe under the slag outlet.
- Power Connection: Connect the power line to the machine and then to a suitable electrical outlet. The machine supports 220V (110V customizable).
Operating Instructions
1. Preheating
- Press the 'POWER' button to turn on the machine. The machine will automatically enter preheating mode.
- The 'Heating Count Down' display will show the remaining preheating time.
- The 'Temperature Controller' will display the real-time temperature of the heater on the first line and the set temperature on the second line. You can adjust the set temperature using the 'RAISE' and 'LOWER' buttons.
- Wait for the countdown to complete, indicating that preheating is finished.
2. Oil Pressing
- Once preheating is complete, add the desired raw materials (seeds/nuts) into the hopper.
- Press the 'PRESS/STOP' button to begin the oil extraction process.
- The machine will start pressing, and oil will begin to flow into the oil cup, while the residue (slag) will exit through the slag outlet.
- Monitor the process. If foreign objects get stuck, the machine will sound an alarm and automatically reverse. In such cases, press 'PRESS/STOP' to stop, and then 'CLEAR' to separate the squeezing chamber and rod to remove the foreign objects.
- Once all material has been processed, press 'PRESS/STOP' to stop the machine.
3. Material Compatibility and Temperature Settings
The DIVEDEER X6 is suitable for pressing oil from over 20 types of materials. The heating temperature is adjustable from 40°C to 300°C.
Figure 3: Suitable Oil Pressing Materials
Examples of compatible materials include:
- Dried avocado
- White sesame
- Sunflower seed
- Black sesame
- Perilla seed
- Coconut meat
- Olive seed
- Peanut
- Rapeseed Mustard seed
- Flaxseed
- Hemp seed
- Pine nut
- Walnut kernel
- Almond
- Pumpkin seed kernel
- Cottonseed
- Soybean
- Camellia seed kernel
Optimal temperature settings may vary depending on the specific material. Refer to the control panel for temperature adjustment.
Video 1: Demonstration of the DIVEDEER Oil Press in operation with various seeds.
Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your oil press and ensure optimal performance.
Figure 4: Expandable Design for Easy Cleaning
- Power Off and Unplug: Always turn off the machine and unplug it from the power outlet before cleaning.
- Cool Down: Allow the machine to cool down completely before disassembling any parts.
- Disassembly: The machine features an expandable design for quick disassembly. Rotate to open the pressing chamber and rod for easy removal.
- Clean Components: Use the provided cleaning brush to remove any residue from the pressing chamber, rod, and hopper. Wash these parts with warm, soapy water.
- Wipe Main Unit: Wipe the main unit with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
- Dry Thoroughly: Ensure all parts are completely dry before reassembling or storing the machine.
- Storage: Store the oil press in a clean, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on | No power supply; Power button not pressed | Check power cord connection and outlet; Press the 'POWER' button. |
| Foreign objects stuck during pressing | Hard or unsuitable material fed into the machine | The machine will alarm and automatically reverse. Press 'PRESS/STOP', then 'CLEAR' to disassemble and remove foreign objects. |
| Low oil yield | Incorrect temperature setting; Material not suitable or too moist/dry | Adjust temperature according to material type; Ensure materials are properly prepared (e.g., dried). |
| Unusual noise during operation | Loose parts; Foreign object; Motor issue | Stop the machine immediately, check for loose parts or foreign objects. If problem persists, contact customer service. |
Specifications
Figure 5: Model X6 Product Information
| Feature | Detail |
|---|---|
| Model | X6 |
| Dimensions (L x W x H) | 43 x 16 x 30.5 cm |
| Voltage | 220V (110V customizable) |
| Rated Power | 800W |
| Pressing Efficiency | 3-6 kg of raw materials per hour |
| Power Consumption | 0.6 kWh per hour |
| Material | All steel shell, 304 stainless steel squeezing chamber, 420 stainless steel squeezing rod |
| Heating Temperature Range | 40°C - 300°C adjustable |
| Packaging Method | Carton |
| Shipping Weight | 8 KG |
User Tips
- For optimal oil extraction, ensure your seeds and nuts are properly dried before pressing.
- Experiment with different temperature settings for various materials to achieve the best oil yield and flavor.
- Regularly clean the pressing components after each use to prevent residue buildup and maintain hygiene.
- Consider alternative delivery options, such as parcel lockers, if standard home delivery has been problematic in your area.
Warranty and Support
For any product-related issues, including damage or quality concerns, please contact our customer service. Provide your order number and a complete unboxing video for prompt assistance. Our customer service team will provide solutions during working hours. Please do not raise disputes without prior communication. We appreciate your patience and understanding.