HIROYASU HI-UV850Pro

Contents

HIROYASU HI-UV850Pro Walkie Talkie USB Programming Cable User Manual

Model: HI-UV850Pro

1. Product Overview

The HIROYASU HI-UV850Pro USB Programming Cable is an essential accessory for managing and customizing the settings of your HIROYASU HI-UV850Pro portable two-way radio. This cable facilitates the connection between your radio and a computer, allowing you to program frequencies, channels, and other operational parameters using compatible Customer Programming Software (CPS).

HIROYASU HI-UV850Pro USB Programming Cable showing both connectors

Figure 1: HIROYASU HI-UV850Pro USB Programming Cable

2. Specifications

FeatureDetail
Item TypeProgramming Cable
Brand NameHIROYASU
Adapted Walkie Talkie ModelHIROYASU HI-UV850Pro (appropriable)
Adapted SystemWinXP, Win7, Win8, Win10, Win11
Connector A Type (To Connect Walkie Talkie)3 Terminals (Others)
Connector B Type (To Connect PC or Mobile Phone)USB
Cable Length100cm (Below 1.5m)
USB InterfaceUSB2.0
MaterialHigh Strength Durable PU Cable
ColorBlack
Weight10g
CertificationCE, FCC
OriginMainland China

3. Setup Guide

  1. Obtain Software and Drivers: Before connecting the cable, ensure you have the correct Customer Programming Software (CPS) and USB drivers for your HIROYASU HI-UV850Pro radio. Please contact the seller via order message to receive these files.
  2. Install Drivers: Install the provided USB drivers on your computer. Follow any on-screen instructions. It is recommended to install drivers before connecting the cable to the computer.
  3. Install Programming Software: Install the CPS for your HIROYASU HI-UV850Pro radio.
  4. Connect the Cable to PC: Plug the USB (Type B) end of the programming cable into an available USB 2.0 port on your computer.
    USB end of the programming cable

    Figure 2: USB Connector

  5. Connect the Cable to Radio: Ensure your HI-UV850Pro radio is turned off. Connect the 3-terminal connector (Type A) of the programming cable to the programming port on your walkie-talkie.
    Radio connector end of the programming cable

    Figure 3: Radio Connector

  6. Power On Radio: Turn on your HI-UV850Pro radio.

4. Operating Instructions

Once the cable is connected and drivers/software are installed, you can proceed with programming your radio:

  1. Launch CPS: Open the Customer Programming Software (CPS) on your computer.
  2. Select COM Port: In the CPS, navigate to the communication settings and select the correct COM port assigned to the USB programming cable. This is usually found in your computer's Device Manager under "Ports (COM & LPT)".
  3. Read from Radio: Use the "Read from Radio" or "Download" function in the CPS to retrieve the current settings from your HI-UV850Pro radio. This is a good practice to back up existing configurations.
  4. Modify Settings: Make the desired changes to frequencies, channels, squelch levels, power settings, and other parameters within the CPS interface.
  5. Write to Radio: After making changes, use the "Write to Radio" or "Upload" function in the CPS to transfer the new settings to your HI-UV850Pro radio. Ensure the radio remains connected and powered on during this process.
  6. Verify Settings: Once programming is complete, disconnect the cable and test your radio to ensure the new settings are correctly applied and functioning as expected.

Important: Always back up your radio's original settings before making any modifications.

5. Maintenance

  • Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid bending or kinking the cable sharply, as this can damage the internal wires.
  • Keep connectors clean and free from dust or debris. Use a soft, dry cloth to wipe them if necessary.
  • Do not pull the cable by the wire when disconnecting; always grasp the connector housing.

6. Troubleshooting

Problem: Cable not recognized by computer.
  • Ensure USB drivers are correctly installed. Check Device Manager for any unknown devices or errors.
  • Try a different USB port on your computer.
  • Restart your computer and try again.
  • Ensure the cable is fully seated in both the computer and the radio.
Problem: Programming software cannot communicate with the radio.
  • Verify that the correct COM port is selected in the CPS.
  • Ensure the radio is powered on and properly connected to the cable.
  • Confirm that the radio model selected in the CPS matches your HIROYASU HI-UV850Pro.
  • Close any other applications that might be using the COM port.
Problem: Error during read/write operation.
  • Do not disconnect the cable or power off the radio during a read/write operation.
  • Ensure the radio's battery is sufficiently charged.
  • Try performing the operation again.
  • If the issue persists, consult the CPS software's help documentation or contact the seller for support.

7. User Tips

  • Always use the official programming software (CPS) provided or recommended by the seller for your specific radio model to avoid compatibility issues.
  • When installing drivers, temporarily disable antivirus software if you encounter installation problems. Remember to re-enable it afterward.
  • Keep your programming software updated to ensure compatibility with the latest operating systems and radio firmware.

8. Warranty and Support

For any technical assistance, troubleshooting beyond this manual, or inquiries regarding software and drivers, please contact the seller directly through your order message system. They can provide specific support for the HIROYASU HI-UV850Pro programming cable and associated software.

© 2024 HIROYASU. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.