1. Introduction
The Jumunion YM119 is a professional OBD2/EOBD+CAN scanner designed to diagnose vehicle issues, read and clear fault codes, perform battery tests, and provide real-time data. This manual provides detailed instructions for its proper use and maintenance.
Warning
To be used under the direct supervision of an adult.
2. Key Features
- Full OBD2 Modes support
- Read and Clear Diagnostic Trouble Codes (DTCs)
- View Freeze Frame data
- I/M Readiness status check for emission tests
- Vehicle Information retrieval
- Live PCM Data Stream display
- Real-time Curves for various parameters
- Battery Test and Battery Life monitoring
- Extensive DTC Look-up library (10000+ codes)
- Fault code playback and Data stream playback
- Supports 13 system languages
- 1.77" Full Color LCD - TFT Screen
- Bright Acrylic Screen Protective Cover
- Soft & Comfortable Silicone Buttons
- 16Pin Heavy-duty Lead Standard OBDII Plug
- Upgraded CPU for High-speed Processing



3. Setup and Connection
The YM119 scanner is designed for plug-and-play operation, requiring no external power source as it draws power directly from the vehicle's OBD2 port.
3.1 Connecting the Scanner
- Locate your vehicle's OBD2 interface. This port is typically found under the dashboard on the driver's side, but its exact location may vary by vehicle model.
- Ensure the vehicle's ignition is OFF before connecting the scanner.
- Plug the 16-pin OBDII connector of the YM119 scanner firmly into the vehicle's OBD2 port.
- Turn the vehicle's ignition to the ON position (engine can be off or running, depending on the test). The scanner will power on automatically.

4. Operating Instructions
Once connected, the YM119 scanner will link to the vehicle. Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, EXIT, BAT) to navigate through the menus and select functions.
4.1 Diagnostic Functions
- Read Codes: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) stored in the vehicle's ECU.
- Clear Codes: Erases DTCs from the vehicle's memory. Warning: Clearing codes without addressing the underlying issue may cause the fault to reappear.
- View Freeze Frame: Shows a snapshot of sensor values when a DTC was set, helping to identify the conditions under which the fault occurred.
- I/M Readiness: Checks the status of various emission-related monitors to determine if the vehicle is ready for an emission test.
- Vehicle Information: Retrieves vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
- Live PCM Data: Displays real-time operational data from the engine control module (PCM).
- Real-time Curves: Provides graphical representation of live data parameters, allowing for visual analysis of sensor performance.
- Mode 6 Detection: Accesses results of on-board diagnostic monitoring tests for specific components/systems that are not continuously monitored.

4.2 Battery Test
The YM119 includes a dedicated battery test function, accessible via the 'BAT' button or through the main menu.
- Battery Measurement: Displays the current battery voltage.
- Battery Monitoring: Shows the battery voltage curve over time.
- Battery Life: Assesses the overall health and life expectancy of the battery.
Note: For accurate battery life testing, ensure the engine is running for a while (approx. 10 minutes) to fully charge the battery, and turn off high-powered accessories like A/C.

4.3 DTC Library (DTC Lib)
The built-in DTC library allows you to look up the meaning of diagnostic trouble codes directly on the device, eliminating the need for external resources.

4.4 System Settings
Customize the scanner's operation through the 'Setting' menu.
- Languages: Select from 13 supported languages including English, German, French, Spanish, Italian, Japanese, Dutch, Russian, Polish, Korean, Portuguese, and Chinese.
- Unit of Measure: Switch between metric and imperial units.
- Key Beep: Adjust or disable button press sounds.
- Backlight: Adjust screen brightness.

5. Specifications
| Feature | Description |
|---|---|
| Model | YM119 |
| Item Type | Code Readers & Scan Tools |
| Display | 1.77" Full Color LCD - TFT Screen |
| Supported Protocols | CAN, ISO9141, J1850 VPM, J1850 PWM, and other OBD2/EOBD protocols |
| Vehicle Compatibility | 12V vehicles: American cars (since 1996), European cars (since 2000), Asian cars (since 2008) |
| DTC Library | 10000+ codes |
| Languages | 13 (English, German, French, Spanish, Italian, Japanese, Dutch, Russian, Polish, Korean, Portuguese, Chinese) |
| Battery Included | No (powered by vehicle OBD2 port) |
| Wireless Function/Support | No |
| Dimensions (approx.) | 13cm (5.11inch) x 6.5cm (2.56inch) |
| Package Dimensions | Length: 21 cm, Width: 15 cm, Height: 4 cm |
| Package Weight | 0.253 kg |
| Origin | Mainland China |
6. User Tips
- Always ensure a secure connection to the OBD2 port to prevent data interruption during diagnosis.
- For optimal battery test results, ensure your vehicle's battery is fully charged and the engine has been running for a short period.
- When clearing fault codes, it is recommended to note down the codes first for future reference and to ensure the underlying issue is resolved.
- If you encounter difficulty understanding a DTC, utilize the built-in DTC library for immediate clarification.
7. Troubleshooting
7.1 Device Does Not Power On
- Check if the OBD2 connector is securely plugged into the vehicle's OBD2 port.
- Ensure the vehicle's ignition is in the ON position.
- Verify that your vehicle is 12V and OBD2 compliant.
7.2 Communication Error
- Confirm the ignition is ON.
- Check if the OBD2 connector is properly connected.
- Turn off the ignition, wait 10 seconds, and then turn it back on before attempting to connect again.
- Ensure the vehicle is OBD2 compliant (most vehicles manufactured after 1996 in the US, 2002 in Europe, and 2008 in Asia are).
7.3 Codes Cannot Be Cleared
- Ensure the ignition is ON and the engine is OFF.
- Some codes cannot be cleared until the underlying fault is repaired. Address the issue first, then attempt to clear the codes.

8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product page or contact the seller directly. Keep your purchase receipt as proof of purchase.
A digital version of the user manual is available for download. For more detailed instructions, please refer to the User Manual (PDF).
9. Safety Precautions
- Always operate the device in a well-ventilated area.
- Keep the device away from ignition sources, open flames, and excessive heat.
- Do not attempt to disassemble or modify the scanner.
- Avoid exposing the device to water or extreme temperatures.
- Ensure proper disposal of electronic waste according to local regulations.
