1. Introduction
The GuliKit TT MAX Wireless Game Controller is designed for precision and versatility, offering an enhanced gaming experience across Nintendo Switch, PC, Android, and iOS devices. Featuring advanced technologies like Tension Adjustable TMR Joysticks, Hyperlink 2 wireless speed, and a Patented Magnetic Levitation Vibration Motor, this controller provides responsive and customizable control.

2. Safety Information
CAUTION!
This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children. Please keep the product and its accessories out of reach of small children.
3. Controller Components
Familiarize yourself with the key components of your GuliKit TT MAX controller:

- Controller Mode Indicator Light: Shows the current connection mode.
- Controller Battery Indicator Light: Displays the current battery level.
- USB-C Port: Used for charging and wired connections.
- Mode Button: Double-click to switch modes. Long press to power off, click to power on.
- Pairing Button: Long press for over 2 seconds to initiate pairing.
- APG Button: Used for Auto-Pilot Gaming functionality.
- Settings Button: Used for configuring special functions.
- L/R/ZL/ZR Buttons: Standard shoulder and trigger buttons.
- A/B/X/Y Buttons: Standard action buttons.
- D-pad: Directional pad.
- Joysticks: Left and Right analog joysticks.

- G1, G2, G3, G4 Paddles: Four removable metal rear paddles for customizable mapping.
- Trigger Mode Switch: Toggles between digital tactile and Hall effect analog trigger modes for ZL and ZR.

4. Setup and Connection
4.1. Power On/Off
- Power On: Short press the Mode or Home button.
- Power Off: Long press the Mode button.
- The controller will automatically power off after 15 minutes of inactivity.
- The controller will not power off automatically when connected via USB or when Auto-Continuous Fire (Turbo) is active.
4.2. Charging
Connect the controller to a power source using the provided USB-C to USB-A data cable. The Controller Battery Indicator Light will show charging status.
4.3. Pairing Methods
4.3.1. PC Pairing
- Bluetooth Pairing (730Hz Polling Rate):
- Switch the controller to PC mode.
- Press and hold the pairing button for 2 seconds until the indicator light flashes rapidly.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- Pairing is complete when the interface displays "Connected".
- Wired Connection (1000Hz Polling Rate):
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller and the other end to a USB-A port on your computer.
- For desktop computers, using a rear USB port is recommended for a more stable connection.
4.3.2. Wireless Pairing for Android, iOS, macOS Devices
- Switch the controller to the corresponding mode (Android/iOS).
- Press and hold the pairing button for 2 seconds until the indicator light blinks quickly.
- On your device, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- Pairing is complete when the interface displays "Connected".
4.3.3. Switch/Switch 2 Pairing
- Set the controller to NS mode and turn it on.
- Press and hold the pairing button for 2 seconds; the indicator light will blink quickly.
- When the Switch/Switch 2 is in sleep state, press the HOME button on a Joy-Con to wake it up and enter the controller pairing interface.
- Pairing is complete once the interface shows a new controller is connected.
5. Operation and Customization
5.1. Auto Pilot Gaming (APG) Functionality
The APG function allows you to record and replay a sequence of controller actions.

- Recording: Long press the APG button for 3 seconds (short vibration) > Perform desired controller actions > Press the APG button to end (long vibration).
- Single Playback: Short press the APG button.
- Repeat Playback: Double-click the APG button.
- During replay, you can use the joystick for movement.
- To cancel replay midway, press any other button.
- Maximum recording time is 10 minutes.
5.2. Back Button Configuration
The four metal rear paddles (G1, G2, G3, G4) can be mapped to other buttons or used for APG functions.

- Back Button Mapping: Press the Settings button (short vibration) + Back button > Press the button you want to map.
- Cancel Back Button Mapping: Press the Settings button + Back button (long vibration).
- Rear paddles only support normal key functions and do not support Continuous Fire.
- APG Function with Back Buttons: Press the APG button + Back button > Perform controller actions > Press the APG button to end. Short press the Back button for single playback. All 4 back buttons have a 30-second APG function.
5.3. Trigger Mode Setting
The ZL and ZR triggers can be switched between digital tactile and Hall effect analog modes.
- Toggle the switch on the back of the controller to change the mode for ZL and ZR triggers.
- Ensure triggers are released before switching modes.
5.4. Special Function Settings (General Notes)
- All special function settings require holding down the Settings button while pressing the corresponding buttons for configuration.
- All special settings are automatically saved.
- The logo light will be white when no special settings are configured, and blue when special settings are configured.
- When the battery is low, the logo light will flash, and the vibration function will automatically turn off. Vibration will resume when the battery level is restored.
5.5. Specific Settings
- Clear All Settings (Reset): Hold Settings button + Mode button. A long vibration indicates the reset is complete and factory settings are restored.
- Joystick Dead Zone Mode: Hold Settings button + L3 button.
- One Vibration: Joystick with dead zone mode.
- Two Vibrations: Anti-Snapback mode (Dead zone ON).
- Long Vibration: Joystick without dead zone mode (Default setting).
- Continuous Fire (Turbo): Hold Settings button + ZR button.
- One Vibration: Normal Continuous Fire (active when held, stops when released).
- Two Vibrations: Auto Continuous Fire (press once to start, press again to stop).
- Long Vibration: Cancel Continuous Fire.
- A-B X-Y Swap: Hold Settings button + A button.
- One Vibration: Swaps input values of A-B and X-Y buttons.
- Long Vibration: Restores default button assignments.
- Vibration Intensity Adjustment: Hold Settings button + D-pad Up/Down.
- One Vibration: Weak vibration.
- Two Vibrations: Standard vibration (Default setting).
- Three Vibrations: Strong vibration.
- Long Vibration: Turn off vibration.
- Vibration Mode Adjustment: Hold Settings button + D-pad Left/Right.
- One Vibration: Rotary Motor mode.
- Two Vibrations: GuliKit Maglev Haptic mode (PC Default setting).
- Three Vibrations: HD vibration mode (Switch Default setting).
- Joystick Sensitivity Adjustment (R3 L3): Hold Settings button + R3/L3 button.
- One Vibration: Sensitivity 50%.
- Two Vibrations: Sensitivity 100% (Default setting).
- Three Vibrations: Sensitivity 150%.
Note: R3 and L3 refer to the buttons when pressing down on the joysticks. Each joystick can be individually configured.
- Set 4-direction on D-pad: Hold Settings button + D-pad button.
- One Vibration: D-pad switches to 4-direction mode.
- Long Vibration: Restores default 8-direction mode (Default setting).

Figure 7: Classic Floating D-pad with interchangeable styles. - Set Motion Aim Assist for PC FPS games: Hold Settings button + L button or ZL button.
- One Vibration: Low sensitivity aim assist.
- Two Vibrations: Medium sensitivity aim assist.
- Three Vibrations: High sensitivity aim assist.
- Long Vibration: Disable motion aim assist (Default mode).
Note: +L sets motion assist to activate when the L button is held. +ZL sets motion assist to activate when the ZL trigger is held.
- Star Ring Lighting Effects: Hold Settings button + Home button to cycle through:
- Default steady on
- Joystick-activated flowing Light
- Colorful Flowing Light
- Trigger-activated flowing light
- Off

Figure 8: Star-Ring RGB Lights modes and joystick sensitivity color indicators. - APG Recording File Share: Hold Settings button + APG button. This enters APG read/write mode. Insert the USB data cable into your computer. A USB drive named "GuliKit dat" will appear. Open it to find "Auto.apg", the APG recording file. You can copy it for backup or replace it with a new APG file. The controller will power off automatically after writing, or you can long press the Mode button. Avoid changing the file name for proper functionality.
6. Maintenance
- Keep the controller clean by wiping it with a soft, dry cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Store the controller in a safe place to prevent physical damage.
- Do not attempt to disassemble or repair the controller yourself, as this may void the warranty.
7. Troubleshooting
7.1. Joysticks Calibration
If joysticks are not responding correctly or drifting:
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "A" buttons simultaneously for 6 seconds to enter calibration mode.
- Rotate both the left and right joysticks in full circles 2 to 3 times.
- The controller will vibrate once to indicate successful calibration and automatically exit calibration mode.


7.2. PC Gyroscope Calibration
If the gyroscope is not functioning correctly on PC:
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "A" buttons simultaneously to initiate automatic gyroscope calibration.
- The controller will vibrate once to indicate successful calibration.
- Note: Calibration is not necessary when the gyroscope is functioning normally.
7.3. Connectivity Issues
If you experience connection drops or lag:
- Ensure the controller is fully charged.
- For PC Bluetooth connections, disable "Show notifications to connect using 'Swift Pair'" in Windows 10/11 Bluetooth settings to reduce latency.
- Use 5GHz Wi-Fi to avoid 2.4GHz interference with Bluetooth, which may reduce polling rates.
- Try a wired connection for maximum stability and lowest latency.


8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS69 (TT Max) |
| Type | Gamepads |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch, Nintendo Switch OLED |
| Interface Type | Bluetooth, Type C |
| Battery Included | Yes |
| Battery Capacity | 950mAh Li-polymer |
| Battery Life (approx.) | 26 hours (lights off, Turbo on); 14 hours (low lights, Turbo on) |
| D-pad Switch Type | MEMBRANE (Classic Floating D-pad) |
| ABXY Switch Type | Tactile switch (Gen-2 Replaceable) |
| Bumpers Switch Type | Tactile switch |
| Joysticks | TMR Joysticks (Anti-Drift, Tension Adjustable, Hall Effect) |
| Trigger Button Type | Hall-Linear (Gen 2 Smart Triggers, 256-Level Hall Effect) |
| RGB Lighting Joysticks | Yes (Adjustable Star-Ring RGB Lights) |
| Wireless Speed Technology | Hyperlink 2 |
| Polling Rate (Wired) | 1000Hz |
| Polling Rate (Bluetooth) | 730Hz |
| Motion Control | Built-in Gyro for Switch games, Motion Aim Assist for PC FPS games |
| Vibration | Patented Magnetic Levitation Vibration Motor (Gen 2 Super Haptic, HD Rumble, Rotor modes) |
| Rear Paddles | 4 Removable Metal Rear Paddles (remappable) |
| Auto-Pilot Gaming (APG) | Yes (Max 10 minutes recording) |
| Software Configuration Support | No |
| Certification | CE, FCC |
Note: Battery life may vary based on game vibration intensity and frequency.
9. User Tips
- Optimize Latency: For PC users, if experiencing slight input delay with Bluetooth, check your Windows Bluetooth settings and disable 'Swift Pair' notifications. This can significantly improve responsiveness.
- Joystick Precision: Take advantage of the 720° tension adjustable joysticks. Experiment with different tension settings to find what feels most precise for your playstyle, especially in games requiring fine aim or delicate movements.
- Customizable Paddles: Don't forget to map the rear paddles (G1-G4) to frequently used actions. This can greatly enhance comfort and reaction time, keeping your thumbs on the joysticks.
- APG for Repetitive Tasks: Utilize the Auto-Pilot Gaming (APG) feature for grinding in games or performing complex combos. Record the sequence once and let the controller do the work.
- D-pad Versatility: The interchangeable D-pads and the option to switch between 4-direction and 8-direction modes allow for optimal control in various game genres, from fighting games to platformers.
10. Support and Further Information
For more FAQs, technical support, and product information, please visit the official GuliKit website:
A detailed user manual is also available in PDF format for download: GuliKit TT MAX User Manual (PDF)