1. Important Safety Information
⚠ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
1.1 General Safety Precautions
- To ensure electromagnetic compatibility, the use of model remote controls is prohibited within a 5,000m radius of an airport runway center.
- Adhere to local regulations regarding radio control in designated areas.
- Fly on warm, sunny, windless days. Avoid extreme weather conditions like heat, cold, strong winds, or heavy rain.
- Choose an open indoor or outdoor area, maintaining a safe distance from people, pets, power lines, and other obstacles.
- Ensure no other devices are using the same frequency. Keep the aircraft in sight.
- Do not touch fast-moving parts of the aircraft after startup. Keep clear of propellers to avoid entanglement (including gears, rotors, etc.).
- Battery and motor temperatures can be high during and after use. Avoid touching to prevent burns.
- Do not look directly into the LED light beam to protect your eyes.
1.2 Warm Tips for Beginners
Beginners are advised to practice flying at low altitudes in an open, uninhabited area for about three days to become familiar with flying before attempting higher altitudes.
2. Product Overview
The 4DRC YL059 is a foldable 5G brushless GPS drone equipped with an 8K professional HD camera and advanced features for aerial photography and intelligent flight.

Image: YL059 Drone with remote control, highlighting GPS, obstacle avoidance, remote control with screen, one-click airdrop.
2.1 Key Features
- Camera: 8K HD camera with 180° electric adjustment, FPV mode, camera lens fill light, and constant light video recording.
- Positioning: GPS precise positioning, optical flow positioning for stable hovering.
- Obstacle Avoidance: GPS-based obstacle avoidance, lift-type indoor obstacle avoidance mode.
- Flight Modes: Intelligent following, circling flight, custom route, headless mode, one-click takeoff/landing, one-key return.
- Special Functions: One-click airdrop function, voice prompt function, APP mobile control.
- Battery: 7.4V 1300mAh large capacity battery for ultra-long endurance.
- Design: Foldable design, high toughness material.
3. Setup and Preparation
3.1 Package Contents
Please check the contents of your package against the list below. If any items are missing, please contact your retailer with your proof of purchase.

Image: All included product accessories.
- Drone (with battery) x 1
- Remote Control x 1
- Spare Propeller Blades (A x 4, B x 4)
- USB Charging Cable x 1
- Screwdriver x 1
- Card Reader x 1
- Memory Card x 1
- Instruction Manual x 2 (German and English)
- WiFi Manual x 1
3.2 Drone Components

Image: Close-up of the drone showing LED navigation lights.
- Main Body: Houses the main electronics and battery.
- Propeller Arms: Foldable arms with motors and propellers.
- Propellers: Labeled A and B, ensure correct placement.
- WiFi Camera: Front-mounted, electrically adjustable.
- Obstacle Avoidance Device: Located on top of the drone.
- LED Navigation Lights: For visibility and status indication.
3.3 Remote Control Overview

Image: Diagram of the remote control with labeled buttons and screen.
- Left Joystick: Controls altitude (up/down) and yaw (left/right rotation).
- Right Joystick: Controls forward/backward and left/right sideward flight.
- Power Switch: To turn the remote control on/off.
- Display Screen: Shows flight information and camera feed.
- GPS Button: Activates/deactivates GPS mode (long press to close screen).
- Obstacle Avoidance Button: Activates/deactivates obstacle avoidance.
- Gyro Calibration Button: Initiates gyroscope calibration.
- Return Button: Initiates one-key return to home.
- Camera Up/Down: Adjusts camera angle.
- Speed Switching: Changes flight speed.
- Airdrop Button: Activates airdrop function.
- Photo/Video Buttons: To take photos or start/stop video recording.
- MicroSD Card Slot: For recording photos and videos.
- Charging Port: USB-C for charging the remote control.
3.4 Charging the Batteries
3.4.1 Charging the Remote Control
- Connect the USB charging cable to the remote control's charging port.
- Connect the other end of the USB cable to a computer or a mobile phone charger.
- The charging indicator light will illuminate during charging and turn off when fully charged.
- Charging time is approximately 40 minutes.
- If the indicator light does not change, the battery is already fully charged.
3.4.2 Charging the Drone Battery
- To remove the drone battery, press the indicated position (refer to diagram in PDF page 4) and pull the battery backward.
- Connect the USB-Android head of the charging cable to the battery.
- Connect the USB end of the cable to a computer or a mobile phone charger.
- The battery indicator light will illuminate during charging and turn off when fully charged.
- Charging time is approximately 360 minutes (6 hours).
- If the indicator light does not illuminate when connected, the battery is already fully charged.
3.5 Pre-Flight Environment Requirements

Image: Rich gameplay features including Waypoint Definition, Smart Follow-up, Orbit Flight, and Multi-zoom.
- Indoor Flight: A spacious, obstacle-free area, preferably without people or pets.
- Outdoor Flight: Sunny, calm weather is preferred. Avoid strong winds (above level 4), extreme temperatures, rain, or snow.
- Keep the drone within line of sight and away from obstacles, high-voltage lines, trees, and crowds.
- Ensure no other devices are using the same frequency.
4. Operating Instructions
4.1 Basic Flight Steps (Outdoor Mode)
- Frequency Matching: Insert the drone battery correctly, place the drone on a flat surface, and power it on. Then, power on the remote control. The remote control will emit a 'Di' sound, indicating successful pairing.
- Gyroscope Calibration: Place the drone horizontally and press the 'Gyro Calibration' button on the remote control. The drone's lights will flash quickly, then stay solid, and the remote control will emit a 'Di' sound, indicating successful calibration.
- Geomagnetic Calibration: This is required for first-time use or if the drone's location changes significantly. After pressing the geomagnetic calibration button on the remote control, it will emit a 'Di' sound and the drone's indicator light will flash quickly. Hold the drone and rotate it slowly three times clockwise horizontally. The remote control will emit a 'Di' sound. Then, point the drone's nose downwards and rotate it slowly three times clockwise vertically. The remote control will emit two 'DiDi' sounds, indicating successful calibration.
- GPS Signal Search: After geomagnetic calibration, place the aircraft on a flat surface. The aircraft will automatically search for satellites. The indicator light will change from slow blinking to solid. The outdoor mode indicator on the remote control will also light up, indicating successful satellite acquisition. Wait for 60-80 seconds (with more than 10 satellites) before unlocking.
- Unlock the Drone: Once GPS is acquired, briefly press the 'Unlock' button on the remote control. All four propellers will start rotating at the same speed, indicating successful unlocking. The drone is now ready for flight.
4.2 Indoor Mode Operation
To switch to indoor mode, long-press the GPS switch button for 3 seconds. The remote control will display 'Di Di' twice, and the indoor mode indicator will light up, confirming the switch.
4.3 Flight Control Methods
- Altitude Control (Left Joystick Up/Down): Pushing the left joystick up increases rotor speed and the drone ascends. Pushing it down decreases rotor speed and the drone descends.
- Yaw Control (Left Joystick Left/Right): Pushing the left joystick left rotates the drone's nose left. Pushing it right rotates the drone's nose right.
- Forward/Backward Flight (Right Joystick Up/Down): Pushing the right joystick up moves the drone forward. Pushing it down moves the drone backward.
- Sideward Flight (Right Joystick Left/Right): Pushing the right joystick left moves the drone left. Pushing it right moves the drone right.
⚠ Warning: When the drone is within 30 cm of the ground, it experiences 'ground effect' due to propeller wash, which can cause instability. The closer to the ground, the greater the effect.
4.4 Special Flight Functions
4.4.1 Camera Angle Adjustment

Image: Illustrates the 180° remote control lens movement for upward, downward, and flat shots.
During flight, the camera angle can be adjusted using the camera adjustment knob on the remote control. Turning the knob left increases the camera angle, and turning it right decreases it.
4.4.2 One-Click Airdrop

Image: Drone equipped with an airdrop device, demonstrating a package being dropped.
The drone supports a one-click airdrop function via the remote control. Press the dedicated airdrop button to release items.
4.4.3 Return to Home (RTH)

Image: GPS intelligent positioning, showing one-click return, low battery return, out of control return, and over range return.
The drone features a return-to-home function. If the reference point is successfully recorded before takeoff, the aircraft will automatically return to the reference point and land in case of communication loss, low battery, or when the RTH button is pressed.
- One-Click Return: If the GPS signal is strong (more than 9 satellites), press the 'One-Key Return' button on the remote control. The drone will return to the recorded home point. During this process, you can still control the drone with the joystick to avoid obstacles.
- Uncontrolled Return: If the remote control signal is lost for more than 6 seconds, the drone will automatically return to the recorded home point, provided GPS is strong and compass is normal. If the signal is restored during RTH, you can cancel the return and regain control.
- Low Battery Return: When the battery is low, the drone will automatically return to the home point at 30 meters altitude. If the battery voltage drops below a safe level, it will automatically land at the home point.
⚠ Caution: During automatic return, the drone cannot avoid obstacles. If GPS signal is poor or not functioning, RTH will not work. If no satellites are found and the remote control signal is lost for more than 6 seconds, the drone will slowly descend and lock in place.
4.4.4 Obstacle Avoidance

Image: Innovative Hidden Design, Lift type obstacle avoidance with one-touch control.
The drone is equipped with GPS-based and lift-type indoor obstacle avoidance. Ensure the obstacle avoidance head is installed correctly before powering on. The obstacle avoidance range is approximately 1 meter. The remote control will emit 'Di Di' when an obstacle is detected. Avoid using obstacle avoidance in direct sunlight as it can interfere with the function.
5. Maintenance
5.1 General Care
- Keep the drone and remote control clean and dry.
- Store in a cool, dry place away from direct sunlight.
- Regularly check propellers for damage and replace if necessary.
- Ensure all connections are secure before each flight.
6. Troubleshooting
| Problem | Solution |
|---|---|
| Drone indicator light flashes quickly and continuously after power on. | The drone is in gyroscope detection mode. Place the aircraft on a flat surface or the ground. |
| Drone cannot hover and tilts after takeoff. | Place the aircraft on a flat surface or the ground and recalibrate the gyroscope. |
| Drone vibrates excessively. | Propeller blades are deformed and must be replaced. |
| Drone cannot be unlocked, and indicator light flashes quickly. | The drone battery voltage is too low. Fully charge the battery. |
| Drone is unstable in strong winds. | Wait for wind conditions to improve (below level 4-5) before flying again. |
| Drone cannot hover, circles constantly. | Geomagnetic calibration failed. Recalibrate the geomagnetic field. |
7. Specifications

Image: Detailed product parameters table.
| Attribute | Value |
|---|---|
| Model | YL059 |
| Category | Camera Drone |
| Color | Dark Grey / White |
| Folded Dimensions | 18 x 9 x 9 cm |
| Expanded Dimensions | 44 x 38 x 9 cm |
| Drone Weight | 246g |
| Max Takeoff Weight | <1kg |
| Motor Type | Brushless Motor |
| Aircraf Operating Frequency | 2.4 GHz, 5GHz |
| Remote Control Distance | 2000 meters (5G image transmission) |
| Max Flight Time | 28 minutes (approx. 20-25 minutes actual) |
| Drone Battery Capacity | 7.4V 1300mAh |
| Remote Controller Battery Capacity | 3.7V 1200mAh |
| Charging Time | 1.5-2 hours (Remote), 360 minutes (Drone) |
| Camera Features | 8K HD Video Recording, 180° Electric Control Camera |
| Video Maximum Resolution | 8K (7680*4320) |
| Video Format | MP4 |
| Field of View | 110° |
| Optical Zoom | 5x |
| Obstacle Avoidance Types | GPS-Based Avoidance |
| Sensing Type | Complete Omnidirectional |
| GPS | Yes |
| Connectivity | APP Controller, Remote Control, WiFi |
| Recommended Age | 14+ |
| Certification | CE |
8. User Tips
- Battery Management: Always ensure your drone and remote control batteries are fully charged before each flight to maximize flight time and prevent unexpected returns or landings.
- Wind Conditions: While the drone has good wind resistance, it's always safer to fly in calm conditions, especially for beginners. Strong winds can affect stability and control.
- GPS Signal: For optimal performance and safety features like Return to Home, ensure a strong GPS signal (more than 9 satellites) before takeoff in outdoor environments.
- Obstacle Avoidance: Remember that obstacle avoidance may be affected by direct sunlight. Use with caution in bright conditions.
- Practice: Take advantage of the various flight modes and practice in open areas to become proficient with the controls before attempting complex maneuvers or flying in challenging environments.
9. Warranty and Support
For any issues or inquiries regarding your 4DRC YL059 GPS Drone, please refer to the official seller's support channels. Keep your purchase receipt for warranty claims.
A PDF version of the user manual is available for download: View User Manual (PDF)