Introduction
The Lefant LS200 is a versatile 3-in-1 cordless wet and dry vacuum cleaner designed to simplify your floor cleaning routine. It vacuums, mops, and features a self-cleaning function, making it ideal for various floor types and everyday spills. With powerful suction and intelligent design, the LS200 ensures a thorough and effortless cleaning experience.
Lefant LS200 Cordless Wet Dry Vacuum Cleaner Mop with accessories
What's in the Box
Please check the package contents to ensure all items are present:
- Lefant LS200 Main Unit
- Charging Base
- Adapter
- Rotating Brush
- HEPA Filter
- Cleaning Brush
Included components: Charging station, HEPA filter, cleaning brush, adapter, and rotating brush
Product Overview
The Lefant LS200 combines vacuuming, mopping, and self-cleaning capabilities into one efficient device. Key features include:
- Powerful Suction: Up to 13000Pa for effective dirt and debris removal.
- Wet & Dry Cleaning: Handles both dry messes and liquid spills.
- Self-Cleaning Roller: Automatically washes the mop roller for hands-free maintenance.
- Edge Cleaning Design: Ultra-thin 5mm edge for cleaning tight corners and baseboards.
- Tangle-Free Technology: Comb teeth remove hair from the roller brush during operation.
- Real-Time Clean Water System: Ensures continuous use of clean water and immediate wastewater drainage.
- Voice Assistant: Provides helpful status updates and reminders.
- Adjustable Handle: 140° adjustable handle and 70° swivel head for enhanced maneuverability.
Key features and specifications of the Lefant LS200
Promotional video demonstrating the vacuum's features and cleaning capabilities.
Setup
- Unpack: Carefully remove all components from the packaging.
- Assembly: Attach the handle to the main unit until it clicks into place.
- Initial Charge: Place the main unit on the charging base and connect the adapter to a power outlet. Ensure the device is charging before first use. The battery level must be above 10% for certain functions like self-cleaning.
- Fill Clean Water Tank: Open the clean water tank (usually located at the top or front of the unit), fill it with clean water (and a suitable cleaning solution if desired, following manufacturer guidelines), and securely close the cap.
- Check Dirty Water Tank: Ensure the dirty water tank is empty and properly installed before use.
Operating Instructions
The LS200 offers intuitive operation with different cleaning modes:
- Power On/Off: Press the power button on the handle to turn the device on or off.
- Select Cleaning Mode: The LS200 typically features two modes:
- Standard Mode: Ideal for light dirt and everyday cleaning.
- Turbo Mode: For stubborn stains and heavy-duty cleaning. Switch between modes using the dedicated button on the handle.
- Start Cleaning: Once powered on and the desired mode is selected, the self-propelled drum will assist in moving the vacuum across the floor.
- Maneuvering: Utilize the 140° adjustable handle and 70° swivel head to easily clean under furniture and reach tight corners. The ultra-thin 5mm edge design helps clean along baseboards effectively.
- Voice Prompts: Pay attention to the voice assistant for important notifications regarding battery status, water tank levels, and cleaning mode.
Switch between Standard and Turbo modes for optimal cleaning
The adjustable handle and swivel head provide ultimate maneuverability
The ultra-thin 5mm edge ensures thorough cleaning along baseboards
Self-Cleaning Function
The LS200 features a convenient one-touch self-cleaning system:
- Dock the Unit: Place the vacuum cleaner securely on its charging base.
- Check Battery: Ensure the battery level is above 10%.
- Activate Self-Clean: Press the dedicated self-clean button on the handle. The device will initiate a 2-4 minute express cycle, using pure water to rapidly rotate and rinse the roller brush, leaving it spotless.
- Empty Dirty Water Tank: After the self-cleaning cycle, empty the dirty water tank to prevent odors and maintain hygiene.
The self-cleaning process ensures a spotless roller brush
Maintenance
Regular maintenance ensures optimal performance and longevity of your LS200:
- Empty Dirty Water Tank: Always empty the dirty water tank after each use and rinse it with clean water.
- Clean Roller Brush: While the self-cleaning function is effective, occasionally remove the roller brush for a deeper clean, especially if you notice debris accumulation. Use the provided cleaning brush.
- Clean HEPA Filter: The HEPA filter should be cleaned regularly (e.g., once a week or as needed) by rinsing it under running water. Ensure it is completely dry before re-installing.
- Wipe Down Unit: Use a soft, damp cloth to wipe the exterior of the vacuum cleaner.
- Store Properly: Store the LS200 on its charging base in a dry, cool place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Doesn't turn on | Battery is low or depleted. | Charge the unit fully. Ensure the adapter is properly connected. |
| Poor suction | Dirty water tank is full. Clogged filter or roller brush. | Empty and clean the dirty water tank. Clean the HEPA filter and roller brush. |
| Self-cleaning not working | Unit not properly docked. Battery level too low. | Ensure the unit is correctly placed on the charging base. Charge the battery above 10%. |
| Leaves streaks on floor | Dirty roller brush. Too much water. | Clean the roller brush thoroughly. Ensure the water-control strip is clean. |
| Unpleasant odor | Dirty water tank not emptied/cleaned. | Empty and thoroughly clean the dirty water tank and roller brush. |
Specifications
| Feature | Specification |
|---|---|
| Model Name | LS200 |
| Brand | Lefant |
| Function | Mopping & Sweeping & Suction Type |
| Suction Power | 13000Pa (Maximum) |
| Power | 120W |
| Voltage | 110V-240V |
| Battery Type | Li-ion |
| Runtime | 30 Minutes |
| Clean Water Tank Capacity | 700mL |
| Dirt Water Tank Capacity | 420mL |
| Filter Type | HEPA |
| Dust Storage Type | Dust Box/Dust Bucket |
| Wireless | Yes |
| Remote Control | No |
| Installation | Hand Held |
| Product Size | 60.7 x 33.8 x 28.5 cm |
| Weight | 6.81kg |
| Certification | CSA, CE |
| Origin | Mainland China |
User Tips
- The self-cleaning feature is a game-changer, making maintenance significantly easier.
- This vacuum is highly effective for picking up pet hair without tangling.
- Always ensure both the clean and dirty water tanks are properly filled and emptied for optimal performance.
- The integrated voice prompts are very helpful for reminding you about maintenance tasks and device status.
- For particularly stubborn stains, switch to the 'Turbo' mode for maximum cleaning power.
Frequently Asked Questions (FAQ)
- Q: How long does the battery last on a single charge?
- A: The LS200 provides approximately 30 minutes of runtime on a full charge.
- Q: What is the maximum suction power of this vacuum?
- A: It offers a powerful maximum suction of 13000Pa.
- Q: Is it effective at cleaning edges and corners?
- A: Yes, the LS200 features an ultra-thin 5mm edge design and a 70° swivel head to effectively clean along baseboards and into tight corners.
- Q: How do I activate the self-cleaning function?
- A: Place the device securely on its charging base and ensure the battery level is above 10%. Then, press the dedicated self-clean button on the handle.
Warranty and Support Information
Lefant products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Lefant support website. Keep your proof of purchase for warranty validation.