Lefant LS200 Cordless Wet Dry Vacuum Cleaner Mop

1. Introduction

Thank you for choosing the Lefant LS200 Cordless Wet Dry Vacuum Cleaner Mop. This innovative 3-in-1 appliance is designed to vacuum, mop, and wash your floors simultaneously, providing an effortless and efficient cleaning experience. With powerful suction, a self-cleaning roller, and intelligent features, the LS200 simplifies your cleaning routine. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Package Contents

Please check the box for the following items:

• Lefant LS200 Main Unit
• Charging Base
• Adapter
• Rotating Brush (pre-installed or spare)
• HEPA Filter (pre-installed or spare)
• Cleaning Brush

Image 1: Overview of the items included in the Lefant LS200 package.

3. Specifications

4. Setup

4.1 Initial Assembly

1. Carefully unpack all components from the packaging.
2. Assemble the main unit by connecting the handle to the body until it clicks into place.
3. Ensure the clean water tank and dirty water tank are correctly installed.
4. Place the charging base in a convenient location near a power outlet.
5. Connect the adapter to the charging base and plug it into a power outlet.

4.2 Charging the Battery

1. Before first use, fully charge the vacuum cleaner.
2. Place the main unit onto the charging base, ensuring it is correctly seated.
3. The charging indicator will illuminate. A full charge typically takes several hours.
4. Ensure the battery level is above 10% before starting any cleaning or self-cleaning cycle.

Image 2: Proper placement on the charging base and battery level requirement for self-cleaning.

5. Operation

5.1 Filling the Clean Water Tank

1. Remove the clean water tank from the main unit.
2. Fill the tank with clean water. You may add a small amount of compatible floor cleaning solution if desired. Do not exceed the MAX fill line.
3. Reinstall the clean water tank securely.

5.2 Starting and Stopping Cleaning

1. Press the power button on the handle to turn on the device.
2. The self-propelled drum will start, simplifying movement.
3. To stop cleaning, press the power button again.

5.3 Cleaning Modes

The LS200 offers different cleaning modes to suit various needs:

• Standard Mode: Ideal for light dirt and everyday cleaning.
• Turbo Mode: Provides maximum suction and water flow for stubborn stains and heavy messes.

Switch between modes using the dedicated button on the handle, depending on the intensity of the stain to optimize cleaning efficiency.

Image 3: Illustration of the two cleaning modes: Standard for light dirt and Turbo for stubborn dirt.

5.4 Advanced Cleaning Features

• 3-in-1 Functionality: The LS200 vacuums, mops, and washes simultaneously, cleaning all messes in one pass.
• Self-Cleaning Roller with Flowing Water System: The roller is continuously cleaned with fresh water during operation, ensuring thorough cleaning without redepositing dirt. Wastewater is immediately drained.
• Constant-Pressure Comb Technology: Integrated comb teeth remove hair from the roller brush during operation, preventing tangles and ensuring a hassle-free clean.
• Edge Cleaning Roller Design: The ultra-thin 5mm edge design allows the vacuum to effectively clean tight corners and along baseboards, eliminating blind spots.
• Voice Assistant: The integrated voice assistant provides real-time status updates, such as "Turbo mode," "Clean water tank empty. Please refill," and "Low battery. Please charge now," enhancing user convenience.

Image 4: Real-time clean water system in action, preventing contamination with dirty water.

Image 5: Maneuverability features, including the adjustable handle and swivel head for reaching difficult areas.

Image 6: The ultra-thin 5mm edge design for effective cleaning along baseboards.

Image 7: Voice assistant notifications for smart and convenient cleaning.

6. Maintenance

6.1 One-Touch Self-Cleaning

The LS200 features a convenient one-touch self-cleaning function for the roller brush:

1. After cleaning, place the main unit back onto the charging base.
2. Ensure the device is correctly installed on its base and the battery level is above 10%.
3. Press the self-clean button (often indicated by a circular arrow icon) on the handle.
4. The device will initiate a 2-4 minute express cycle of ultra-fast rotation and pure water rinsing to clean the roller.
5. This process helps to free your hands from manual cleaning and prevents dirt and unpleasant odors.

6.2 Emptying the Dirty Water Tank

It is crucial to empty the dirty water tank after each use to prevent odors and maintain hygiene:

1. Remove the dirty water tank from the main unit.
2. Carefully pour out the dirty water.
3. Rinse the tank with clean water and allow it to air dry before reinstalling.

6.3 Cleaning the HEPA Filter

The HEPA filter should be cleaned regularly to maintain optimal suction performance:

1. Remove the HEPA filter from the dirty water tank.
2. Tap the filter gently to remove loose dust and debris.
3. If necessary, rinse the filter under running water. Ensure it is completely dry before reinstalling to prevent mold growth and damage to the vacuum.

6.4 Cleaning the Roller Brush

While the self-cleaning function is effective, occasional manual cleaning of the roller brush may be necessary:

1. Remove the roller brush from the vacuum head.
2. Use the provided cleaning brush to remove any tangled hair or stubborn debris.
3. Rinse the roller brush under running water if needed and allow it to air dry completely before reinstallation.

7. Troubleshooting

If you encounter any issues with your Lefant LS200, please refer to the following common problems and solutions:

• No Power/Does Not Turn On: Ensure the battery is fully charged and the unit is correctly placed on the charging base. Check if the power adapter is securely plugged into both the base and the wall outlet.
• Weak Suction: Check if the dirty water tank is full and needs emptying. Inspect the roller brush and suction path for any blockages. Clean or replace the HEPA filter if it is clogged.
• Water Leaking: Ensure both the clean and dirty water tanks are correctly installed and their seals are intact. Do not overfill the clean water tank.
• Roller Brush Not Rotating: Check for any obstructions or tangled hair around the roller brush. Ensure the roller brush is correctly installed.
• Unpleasant Odor: Empty and thoroughly clean the dirty water tank and roller brush after each use. Ensure all components are completely dry before reassembly.
• Voice Assistant Not Working: Check the device settings for voice assistant activation. Ensure the volume is not muted.

If the problem persists, please contact customer support for further assistance.

8. User Tips

• For best results, pre-vacuum large debris before using the wet-dry function on heavily soiled areas.
• Always use cold or lukewarm water in the clean water tank. Avoid hot water as it can damage components.
• Regularly check and clean the HEPA filter to maintain optimal air quality and suction power.
• Store the vacuum cleaner on its charging base in an upright position to ensure it's always ready for use.
• When cleaning along edges, move the vacuum slowly to allow the edge cleaning roller to effectively pick up debris.

9. Warranty and Support

The Lefant LS200 comes with a 2-year warranty, ensuring peace of mind regarding your purchase. For any warranty claims, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Lefant website.