ZEFIORA M12

Contents

Zefiora M12 Mountain Electric Bike User Manual

Model: M12

Introduction

Congratulations on your purchase! This user manual will help you assemble and operate your new electric bike. Be sure to read all the information in this manual before riding.

NOTE TO ALL RIDERS UNDER 18 YEARS OF AGE:

It's very important that you get parental permission before riding your electric bike.

Video: Overview of the Zefiora M12 Electric Bicycle Model, showcasing its features including a phone holder and car lock.

Product Safety Notice

Don't Ride Until You Read This:

  • Always wear a helmet when riding your electric bike.
  • Keep the two keys properly. If the unique keys are lost, you will not be able to turn on the bike or replace the battery. If necessary, you should get more spare keys (We don't have a backup key).
  • Make sure your electric bike has a full battery before taking it out to ride.
  • Always be aware of local road laws, and follow them.
  • Do not ride the bike under the influence of drugs or alcohol.
  • Always respect pedestrians.
  • Do not ride under wet conditions. The electric bike may slide from under your feet causing injury. Wet conditions may damage the electronics and void the warranty.

Warning Message

  1. Avoid water: The electric bike is not waterproof. The electronics may be damaged due to water and water damage is not covered by our warranty. Riding in wet conditions is also very dangerous and may result in injury.
  2. Avoid prolonged exposure to sun or rain and avoid storage in places with high temperatures or corrosive gas.
  3. Abuse: We do not cover physical damage due to negligent care and extreme riding.
  4. Whenever you ride the Electric Bike, you risk severe injury or even death from loss of control, collisions, and falls. Use caution and ride at your own risk.
  5. Do not modify the product from manufacturer's original design.
  6. Do not exceed the posted speed limit and obey all traffic laws.
  7. Avoid touching the charging port directly and do not let it make contact with a metal object.
  8. Keep hands and all body parts away from moving parts while operating the electric bike.
  9. Before riding, be sure to check the electric bike over and make sure the electric bike is operating correctly before each use.
  10. Before riding - be sure to check that the braking system is functioning properly; also be sure to check that all safety labels are in place and you understand the safety warnings.
  11. Before riding - be sure that any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition.
  12. Before riding - be sure to check that the tires are in good condition, inflated properly, and have sufficient tread remaining.
  13. The electric bike should never be used by children under the age of 18.
  14. Make note that additional insurance may be required to cover situations you encounter while riding an electric bike. It is recommended that you contact an insurance company or broker for advice and consultation.
  15. To conserve electricity, use assist mode, and avoid zero starting, frequent braking, driving against the wind, carrying heavy loads including other people and riding with insufficient air pressure.

Package Contents

Carefully check package contents. If anything is missing or damaged, please contact Electric Bike customer service for support: ebikesservice@outlook.com

Unpack the bike. Open the bike box and remove the small box inside. With the help of another person capable of safely lifting a heavy object, remove the bike from the bike box. Carefully remove the packaging material protecting the bike frame and components. Please recycle packaging materials especially cardboard and foam whenever possible. Open the small box and carefully set out all contents.

Zefiora M12 Electric Bike and included parts

Image: Zefiora M12 Electric Bike and its components as received in the package.

Included Items:

  • User Manual x1
  • Seat x1
  • Pedals x2
  • Front Wheel x1
  • 2 x Wrenches
  • 3 x Allen Key Wrenches
  • Kickstand x1
  • Keys x2
  • Charger x1
  • Fender x2
  • Electric Bike x1

Product Overview

Two Zefiora M12 Ebikes with riders in a park setting

Image: Two Zefiora M12 Ebikes with riders in a park setting, highlighting key features like 25mph Max Speed, 65 Miles Long Range, 1500W Peak Motor, 48V 20Ah Battery, 350lbs Max Load, and Dual Disc Brakes.

The Zefiora M12 Mountain Electric Bike is designed for versatile use, offering a powerful and comfortable riding experience. It features a robust frame, a high-performance motor, and a long-range battery.

Key Features:

  • Motor: Powerful 1500W Peak Brushless Motor, capable of conquering inclines.
  • Battery: 48V 20AH Large Removable Battery for easy charging and powerful rides, offering 50-65 miles range.
  • Tires: 26" All-Terrain Tires, stable on various road types including city, mountain, off-road, and snow.
  • Safety: UL2849 Certification, Puncture-Resistant Tires, IPX7 Waterproofing, Front and Rear Brakes, Headlight, Rear Fender Reflector.
  • Controls: Intuitive controls including Front Brake Grip, Rear Brake Grip, Setting Button, LCD Display Button, 7-Speed Gears, Speaker Button, Light button, Digital instrument, and Thumb turning handle.
  • Comfort & Convenience: Adjustable Seat Post, Clear-Tone Bell, Durable Fenders, Front Fork Suspension, 7-Speed Gearing.
Diagram of Zefiora M12 Ebike handlebars and controls

Image: Detailed view of the Zefiora M12 Ebike handlebars and controls, including brake grips, buttons, LCD display, and disc brakes.

Assembly

If you are unable to install after reading these instructions, you can contact customer service for guidance and a video.

Step 1 - Front Fork

  1. Remove the front wheel and install it on the front fork.
  2. Then install the front wheel anti-spin hook and nut, and tighten them.

Step 2 - Fender & Headlight

  1. Take out the fender, remove the nut, washer and bolt at the top of the front fork.
  2. Fix the headlight and fender to the fixed position on the front fork with screws.
  3. Use a cross screwdriver to loosen the screw at the rear mudguard clip position, then separate the clip by hand and hook it under the saddle tube clamp.
  4. Adjust to the proper position and tighten the screws with a cross screwdriver to secure the mudguard.

How to adjust the brake tension on a bicycle

  1. Remove the front wheel and install it on the front fork.
  2. Squeeze & Pull & Secure: Squeeze the brake caliper arms by hand to pull the cable tight. While squeezed, tighten the locknut firmly.

CAUTION: For your safety, please spin the wheel and test the brakes before riding.

The abnormal noise is caused by thicker brake pads to extend brake life, which can cause friction against the brake disc. This is normal and will return to normal after a few days of wear. How to adjust disc brakes to eliminate friction noise: If your bicycle disc brakes are rubbing against the disc (i.e., the brake disc is making a "sizzling" sound), please adjust them according to the following steps: The image below shows the adjustment for the front and rear brakes. If the noise persists after adjustment, it is recommended to have it adjusted at a vehicle repair shop, or contact our customer service.

How to adjust abnormal brake noise on a bicycle

  1. Prepare tools and locate: Locate the disc brake caliper (the metal part that holds the brake disc). You will see two vertical screws on the caliper (usually an M6 Allen wrench is used). Prepare the appropriate tools.
  2. Loosen the screws: Use the M6 Allen wrench to slightly loosen these two screws. Note: Only loosen them by one to one and a half turns, allowing the caliper to move slightly left and right. Do not completely remove the screws!
  3. Alignment Position: Gently straighten the wheel with your hand, ensuring it is centered on the frame. Now, use your hand to slightly adjust the position of the brake caliper, moving it left and right. Your goal is to align the brake disc exactly in the center of the two brake pads, with even clearance on both sides. While adjusting, gently rotate the wheel with your other hand, judging by the sound. The optimal position is when it rotates smoothly without any friction noise.
  4. Keeping the clamp in the optimal position, alternately and gradually tighten the two loosened screws. Do not tighten one screw completely at once, as this can easily cause the position to shift again.

After the screws are fully tightened, quickly rotate the wheel one last time to confirm that there are no abnormal noises. If there is still slight friction, repeat steps 2-3.

Step 3 - Stem

  1. Loosen the screws to remove the front fork sleeve.
  2. Take out the stem and insert it into the front frame.
  3. Tighten the screws to fix the stem in place.
  4. After making sure the stem is aligned with the direction of the tire, tighten the clamping screws below the stem to fix the direction.

Step 4 - Kickstand

  1. First, you need a screwdriver to fix the screws on the kickstand.
  2. Secure the kickstand to the designated position of the bike.
  3. Fasten the screws on the right.
  4. Finally fix the screws on the left side, making sure they are locked to prevent them from falling off during riding.

Step 5 - Pedals

  1. Locate the right-side / left-side pedal, which is marked "R," "L," should have an "R"/"L" sticker attached.
  2. Thread the right pedal onto the right crank gently by hand, turning clockwise. Then tighten pedal by allen wrench.
  3. Thread the left pedal onto the left crank gently by hand, turning counter-clockwise. Then tighten pedal by allen wrench.
  4. Check the chain alignment. Rotate the right pedal and crank toward the back of the bike as though pedaling backward. Watch the chain and ensure the chain runs through the drivetrain (the rear cog, chain tensioner, and around the front chain ring) smoothly.

Note: If the pedal/chain doesn't run smoothly or something seems misaligned, please contact Electric Bike Support at support@ride-ebike.com.

Step 6 - Seat

  1. Loosen the quick-release screws on the saddle clamp to install the seat post.
  2. Move the seat up and down by sliding the seat post in or out of the seat tube.
  3. Tighten the screws to fix the seat post in place.
  4. After making sure the stem is aligned with the direction of the tire, tighten the clamping screws below the seat post to fix the direction.

Positioning the seat at the right height is important for better pedaling, safety, and overall riding comfort. The rider's leg length is used to determine the seat's position. When you pedal, your hips should remain level and your legs should be almost fully extended at the bottom of the pedal stroke, but not over-extended.

To determine the right seat height, sit on the eBike with one pedal at its lowest point and place the ball of your foot on the pedal. Your leg should be almost fully extended (not locked out) with a slight bend at the knee.

Battery Removal and Charging

Battery Removal Procedure

  1. Insert the key and turn it counterclockwise to the left; the battery will pop out.
  2. Then remove the battery and lift it upwards.

When Removing the Battery:

Be careful not to drop or damage the battery once it is loose from the bike. Avoid damaging the exposed connector terminals and keep them clear of debris.

When Installing the Battery:

Ensure the battery is turned off before sliding it into the frame mount receptacle. Do not force the battery onto the receptacle. Slowly align and push the battery down into place. Before each use, ensure the battery has been properly secured by carefully pulling upwards on it with both hands to test the attachment.

Steps to unlock, eject, and remove the Zefiora M12 Ebike battery

Image: Visual guide for unlocking, ejecting, and removing the Zefiora M12 Ebike battery.

Charge Your E-Bike

Before using the electric bike, you must fully charge the battery.

  1. Ensure the battery is off, by rotating the key to align with the off icon.
  2. Remove the rubber cover on the charging port on the opposite side of the battery from the key switch.
  3. Plug the charger into the battery's charging port. With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output plug from the charger to the charging port on the side of the battery.
  4. Plug the charger into a power outlet, charging should initiate and will be indicated by the LED charge status lights on the charger turning red. Once fully charged, the charging indicator light turning green. Unplug the charger from the wall outlet first and then remove the charger output plug from the battery charging port.

Operating Instructions

Display and Settings, and How to Shift Gears and Adjust Speed

Zefiora M12 Ebike display and controls

Image: Zefiora M12 Ebike display and controls, showing battery, speed, fault indicators, function keys, and power button.

Instrument Operating Instructions

  1. Power on/off: Press and hold the "Power on" button for 2 seconds to power on or off.
  2. Gear shifting: Double-click the "Function Key" to cycle through gears 1-3.
  3. Kilometers/miles: Triple-click the function key to switch between kilometers/miles and public miles.
  4. Zero/Non-Zero Startup: Five presses of the "Function Key" button to switch between zero and non-zero startup.
  5. Parameter Setting: Simultaneously press the "Function Key" and "Power Key" for 5 seconds to enter parameter setting mode.

Parameter Settings:

  • [P01] Wheel diameter: After clicking the "Power button" to switch to P2, click the "Function button" to enter the 5-32 wheel diameter selection. Click the "Power button" again to confirm the default 14.
  • [P02] Gear Options: After clicking the "Power Button" to switch to P3, click the "Function Key" to enter gear 03/05. Then click the "Power Button" to confirm the default 03.
  • [P03] Mileage conversion: After clicking the "Power Button" to switch to P4, click the "Function Key" to enter 00/01. Select and click the "Power Button" again to confirm the default 00.
  • [P04] Speed limit: After clicking the "Power button" to switch to P5, click the "Function key" to select 25-90, then click the "Power button" to confirm the default 25.
  • Automatic shutdown after 5 minutes of inactivity.

The top one is the headlight switch, and the bottom one is the horn switch.

Daily Care and Maintenance

Cleaning and Storage

If you see stains on the bike body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste, and brush them with a tooth brush, then wipe them off with a damp cloth.

Notes: Do not clean the bike with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the bike with a high-pressure water spray. During cleaning, make sure that the bike is turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems. When the bike is not in use, keep it indoors where it is dry and cool. Do not put it outdoors for a long time. Excessive sunlight, overheating and over cooling accelerate the battery pack's life span.

Battery Maintenance

  1. Use original battery packs, use of other models or brands may bring about safety issues.
  2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short circuit which may result in battery damage or even injuries and deaths.
  3. Use original power adapter to avoid potential damage or fire.
  4. Mishandling of used batteries may do tremendous harm to the environment. To protect natural environment, please follow local regulations to properly dispose used batteries.
  5. After every use, fully charge the battery to prolong its life span.

Storage and Disposal

  1. Please try to store the bike in a cool and dry place between 50°F-77°F (10°C- 25°C). In extremely humid environments, the interior of the bike may suffer condensation or even water accumulation, which may damage the battery rapidly. Devices are not intended for use at elevations greater than 2000m above sea level. Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
  2. In daily use, try to avoid recharging the bike after completely exhausting the battery. If the battery is low, charge it as soon as possible.
  3. Please charge the bike every other month to preserve the battery.

Safety Check

Tire Inflation and Replacement

The M10 and M12 models are equipped with 26 x 2.125 inch tires. The tires are designed for durability and safety for regular cycling activities and need to be checked before each use for proper inflation and condition. Proper inflation, care, and timely replacement will help ensure that your bike's operational characteristics will be maintained, and unsafe conditions avoided.

Recommends 40-65 PSI for the stock tires on the bike. Always stay within the manufacturer's recommended air pressure range as listed on the tire sidewall.

It is critically important that proper air pressure is always maintained in pneumatic tires. Do not underinflate or overinflate your tires. Low pressure may result in loss of control, and overinflated tires may burst. Failure to always maintain the air pressure rating indicated on pneumatic tires may result in tire and/or wheel failure.

Inflate your tires from a regulated air source with an available pressure gauge. Inflating your tires from an unregulated air source could overinflate them, resulting in a burst tire.

Even tires equipped with built-in, flat-preventative tire liners, like those that come with bikes, can and do get flats from punctures, pinches, impact, and other causes. When tire wear becomes evident or a flat tire is discovered, tires and/or tubes must be replaced before operating the bike or injury to operators and/or damage to your bike could occur.

When changing a tire or tube, ensure that all air pressure has been removed from the inner tube prior to removing the tire from the rim. Failure to remove all air pressure from the inner tube could result in serious injury.

Using aftermarket tires or inner tubes, not provided by ride-ebike may void your warranty, create an unsafe riding condition, or damage to your bike. If required by law, ensure replacement aftermarket tires have sufficient reflective sidewall striping.

For more information on tire or tube replacement procedures, or questions about tire inflation, Contact Support.

Pre-Ride Safety Checklist

Safety CheckDetails
1. Brakes
  • Ensure front and rear brakes work properly.
  • Check brake pads for wear and ensure they are not overworn.
  • Ensure brake pads are correctly positioned in relation to the rims.
  • Ensure brake cables are lubricated, correctly adjusted, and display no obvious wear.
  • Ensure brake levers are lubricated and tightly secured to the handlebar.
  • Test that the brake levers are firm and that the brake, and the brake light are functioning properly.
2. Wheels and Tires
  • Ensure tires are inflated within the recommended limits posted on the tire sidewalls and hold air.
  • Ensure tires have good tread, have no bulges or excessive wear, and are free from any other damage.
  • Ensure rims run true and have no obvious wobbles, dents, or kinks.
  • Ensure all wheel spokes are tight and not broken.
  • Check axle nuts and front wheel quick-release to ensure they are tight. Ensure the locking lever on the quick-release skewer is correctly tensioned, fully closed, and secured.
3. Steering
  • Ensure the handlebar and stem are correctly adjusted, tightened, and allow proper steering.
  • Perform a handlebar twist test (see assembly step 3) to ensure the stem clamp bolt security.
  • Ensure the handlebar is set correctly in relation to the fork and the direction of travel.
4. Chain
  • Ensure the chain is clean, oiled, and runs smoothly.
  • Extra care is required in wet, salty/otherwise corrosive, or dusty conditions.
5. Bearings
  • Ensure all bearings are lubricated, run freely, and display no excess movement, grinding, or rattling.
  • Check headset, wheel bearings, pedal bearings, and bottom bracket bearings.
6. Cranks and Pedals
  • Ensure pedals are securely tightened to the cranks.
  • Ensure the cranks are securely tightened and are not bent.
7. Derailleur and Mechanical Cables
  • Check that the derailleur is adjusted and functioning properly.
  • Ensure shifter and brake levers are attached to the handlebar securely.
  • Ensure all shifter and brake cables are properly lubricated.
8. Frame, Fork, and Seat
  • Check that the frame and fork are not bent or broken.
  • If either frame or fork are bent or broken, they should be replaced.
  • Check that the seat is adjusted properly, and seatpost quick-release lever is securely tightened.
9. Motor Drive Assembly and Throttle
  • Ensure hub motor is spinning smoothly and motor bearings are in good working order.
  • Ensure all power cables running to hub motor are secured and undamaged.
  • Make sure the hub motor axle bolts are secured and the torque arm, torque arm bolt, and torque washers are in place.
10. Battery
  • Ensure battery is charged before use.
  • Ensure there is no damage to battery.
  • Lock battery to frame and ensure that it is secured.
  • Charge and store bike and battery in a dry location, between 50°F- 77°F (10°C-25°C).
  • Let bike dry completely before using again.
11. Electrical Cables
  • Look over connectors to make sure they are fully seated and free from debris or moisture.
  • Check cables and cable housing for obvious signs of damage.
  • Ensure headlight, taillight, and brake light are functioning, adjusted properly, and unobstructed.
12. Accessories
  • Ensure all reflectors are properly fitted and not obscured.
  • Ensure all other fittings on bike are properly secured and functioning.
  • Inspect helmet and other safety gear for signs of damage.
  • Ensure rider is wearing a helmet and other required riding safety gear.
  • Ensure mounting hardware is properly secured if fitted with a front rack, rear rack, basket, etc.
  • Ensure the taillight and taillight power wire are properly secured if fitted with rear rack.
  • Ensure the fender mounting hardware is properly secured if fitted with fenders.
  • Ensure there are no cracks or holes in fenders.
  • If installed, ensure the optional rear wheel lock is secured in the unlocked position and the key is removed before every ride.

Your cables, spokes, and chain will stretch after an initial break-in period of 50-100 mi (80-160 km), and bolted connections can loosen. Always have a certified, reputable bike mechanic perform a tune-up on your bike after your initial break-in period of 50-100 mi (80-160 km) (depending on riding conditions such as total weight, riding characteristics, and terrain). Regular inspections and tune-ups are particularly important for ensuring that your bike remains safe and fun to ride.

Troubleshooting

SymptomsPossible CausesMost Common Solutions
1. The bike does not work
  • Insufficient battery power
  • Faulty connections
  • Battery not fully seated in tray
  • Improper turn on sequence
  • Brakes are applied
  • Charge the battery
  • Clean and repair connectors
  • Install battery correctly
  • Turn on bike with proper sequence
  • Disengage brakes
2. Irregular acceleration and/or reduced top speed
  • Insufficient battery power
  • Loose or damaged throttle
  • Misaligned or damaged magnet ring
  • Charge or replace battery
  • Replace throttle
  • Align or replace magnet ring
3. The motor does not respond when the bike is powered on
  • Loose wiring
  • Loose throttle
  • Loose motor plug wire
  • Repair and or reconnect
  • Tighten throttle
  • Secure motor plug wire.
4. Reduced range
  • Low tire pressure
  • Low or faulty battery
  • Driving with too many hills, headwind, braking, and/or excessive load
  • Battery discharged for long period of time without regular charges, aged, damaged, or unbalanced
  • Brakes rubbing
  • Adjust tire pressure
  • Check connections or charge battery
  • Assist with pedals or adjust route
  • Balance the battery; contact tech support if range decline persists
  • Adjust the brakes
5. The battery will not charge
  • Charger not well connected
  • Charger damaged
  • Adjust the connections
  • Replace
6. Wheel or motor makes strange noises
  • Loose wheel spokes or rim
  • Loose motor wiring
  • Tighten, repair, or replace
  • Reconnect motor.

You can contact the customer service of the platform you purchased from.

Specifications

ITEMSPECIFICATIONS
ModelM10/M12
Product Dimensions135*22*72 (cm)
Package Dimensions168*23*98/168*25*104 (cm)
E-Bike Weight50.7lb (23kg) / 55.1lb (25kg)
Battery48V 10Ah
Charger54.6V 2A
Charging Time3-6 Hours
Tire Pressure40-65 PSI
Bell/HornElectric Horn Installed
Frame MaterialHigh Carbon Steel
High-concerned chemicalNone
CertificationCE
Rated Passenger CapacityOne Seat
StyleStandard Type
Max Speed<25km/h
Range per Power10 - 30 km
Wattage> 500w
Power SupplyLithium battery
Voltage48V
Power SourceLithium battery
OriginMainland China
FoldedNo
MotorBrushless
Wheel Size26“
Frame MaterialAluminum alloy

This user manual is a general version, using a 48V 10Ah battery capacity as an example (specific parameters may vary depending on the product you purchase).

User Tips

  • Regular Tire Pressure Checks: Ensure your tires are always within the recommended 40-65 PSI range for optimal performance and safety.
  • Battery Care: To prolong battery life, avoid completely draining it before recharging, and store the bike in a cool, dry place. Charge every other month if not in regular use.
  • Brake Adjustment: If you experience abnormal brake noise, try adjusting the caliper screws as detailed in the assembly section. Persistent noise may require professional service.
  • Contact Support: For any assembly difficulties or issues not covered in troubleshooting, contact customer service at ebikesservice@outlook.com with photos/videos and your order ID for prompt assistance.

Frequently Asked Questions (FAQs)

Q1: What if the e-bike arrived missing an accessory or a broken part?
A1: Please take a photo and send to Electric Bike Support Team by sending email: support@ride-ebike.com and Electric Bike Support Team will reply you soon and send correct accessory or part replacement.
Q2: Will my bike arrive assembled?
A2: Your bike will arrive mostly assembled. We'll also provide the tools and a comprehensive assembly video for the rest part.
Q3: What can I do if something goes wrong with my e-bike during the warranty?
A3: We believe that communication is the best way to solve the problem. Please contact us in time. To help you solve the problem as quickly as possible, please describe the problem in detail and provide photos/videos with your order ID. ebikesservice@outlook.com

Error Codes:

CodeDescription
E0Communication Error
E4Accelerator Error
E5Brake Error
E6Hall Sensor Error
E7Undervoltage Error
E8Overvoltage Error

Alternatively, you can contact the customer service of the platform you purchased from.

Statement of Compliance

Disclaimer

⚠️Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

UL 2849 Electrical Systems for eBikes certification reports

Image: UL 2849 Electrical Systems for eBikes certification reports, indicating compliance with safety standards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.