Aigostar LED Projector User Manual

1. Introduction

Thank you for choosing the Aigostar LED Projector. This manual provides essential information for the safe and efficient use of your new LED floodlight. Please read it thoroughly before installation and operation, and retain it for future reference.

The Aigostar LED Projector is designed for high-brightness illumination with maximum energy efficiency. Featuring advanced LED technology, it delivers 750 lumens of cold white light (6500K) at only 10W, offering significant energy savings compared to traditional lighting.

Its robust construction with an IP65 rating ensures reliable performance in various outdoor environments, resistant to moisture, dust, heat, corrosion, and impacts. The ultra-thin design and integrated heat sink contribute to an extended lifespan of over 25,000 hours.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage:

• Always disconnect power before installation, maintenance, or cleaning.
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Ensure the power supply voltage matches the product's specifications (240V AC).
• Do not look directly into the LED light source when it is illuminated, as it may cause eye strain or damage.
• Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
• Ensure the mounting surface is strong enough to support the fixture securely.
• Keep flammable materials away from the light fixture.
• The product is rated IP65 for outdoor use, but avoid submerging it in water.

3. Package Contents

Your package should contain the following items:

• Aigostar LED Projector (quantity as purchased, typically a pack of 6)
• Mounting bracket (pre-attached or included)
• Basic mounting hardware (screws, anchors)
• User Manual (this document)

4. Specifications

5. Installation and Setup

The Aigostar LED Projector is designed for flexible installation on ceilings, walls, or floors. Ensure the chosen location provides adequate support and is within reach of a suitable power source.

5.1 Mounting the Fixture

1. Choose Location: Select a desired mounting spot. Consider the beam angle (110°) to ensure optimal light coverage.
2. Mark Drilling Points: Use the mounting bracket as a template to mark the positions for drilling holes.
3. Drill Holes: Drill holes of appropriate size for the provided screws and anchors.
4. Secure Bracket: Attach the mounting bracket firmly to the surface using the screws and anchors.
5. Attach Light: Secure the LED projector to the mounted bracket.

5.2 Electrical Connection

WARNING: Ensure power is OFF at the main circuit breaker before making any electrical connections.

1. Identify Wires: The projector comes with a short cable. Identify the wires:
   • Brown wire: Live (L)
   • Blue wire: Neutral (N)
   • Yellow/Green wire: Earth (Ground)
2. Connect to Power Supply: Connect the projector's wires to your main power supply wires according to standard electrical codes (Live to Live, Neutral to Neutral, Earth to Earth). Use appropriate waterproof junction boxes and connectors for outdoor installations to maintain IP65 integrity.
3. Insulate Connections: Ensure all connections are properly insulated.

5.3 Adjusting the Angle

The mounting bracket allows for a 180° adjustment. Once installed, loosen the screws on the side of the bracket, adjust the light to your desired angle, and then tighten the screws securely to fix its position.

6. Operating Instructions

Once properly installed and connected to the power supply, the Aigostar LED Projector will illuminate when power is supplied. There are no external controls on the unit itself. Operation is typically controlled via the wall switch or external timer/sensor connected to the power circuit.

7. Maintenance

The Aigostar LED Projector requires minimal maintenance due to its durable design and long-lasting LEDs.

• Cleaning: Periodically clean the surface of the light fixture with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
• Inspection: Regularly check the mounting hardware and electrical connections for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components immediately.
• No User-Serviceable Parts: The LED light source is integrated and not replaceable by the user. Do not attempt to open the fixture.

8. Troubleshooting

If you encounter issues with your LED Projector, refer to the following common problems and solutions:

9. User Tips

• For optimal outdoor illumination, consider mounting the floodlight at a height that allows its 110° beam angle to cover the desired area effectively without causing glare.
• When installing multiple units, space them evenly to achieve uniform lighting across larger spaces like patios or parking lots.
• Regularly clean the glass surface to maintain maximum light output, especially in dusty or high-pollen environments.

10. Warranty and Support

AIGOSTAR products are manufactured to high-quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official AIGOSTAR website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact AIGOSTAR customer service through their official channels.