ToolkitRC M6DAC PRO / M6DAC V2

Contents

ToolkitRC M6DAC PRO/V2 Intelligent Charger User Manual

Models: M6DAC PRO, M6DAC V2

1. Introduction

Thank you for choosing the ToolkitRC M6DAC PRO or M6DAC V2 Intelligent Charger. These dual-channel chargers are designed for a wide range of battery types, offering powerful and efficient charging solutions for hobbyists and professionals. This manual provides essential information for the safe and effective operation of your charger.

ToolkitRC M6DAC PRO and V2 Intelligent Chargers
Figure 1: ToolkitRC M6DAC PRO and V2 Intelligent Chargers overview.

2. Safety Information

  • Always operate the charger in a well-ventilated area, away from flammable materials.
  • Do not leave the charger unattended during operation.
  • Ensure correct battery type and cell count settings before charging. Incorrect settings can lead to battery damage or fire.
  • Keep the charger away from moisture, dust, and direct sunlight.
  • Do not attempt to disassemble or modify the charger.
  • Use only the provided power cables and accessories.
  • The charger is designed for users aged 14 and above.
Comprehensive Security Protection features
Figure 2: Comprehensive security protection features including short circuit, voltage, current, capacity, temperature, and time-out protection, along with flame-retardant casing.

3. Product Overview

The M6DAC PRO and M6DAC V2 are advanced dual-channel intelligent chargers featuring a compact design and a user-friendly interface. They are capable of charging a wide array of battery chemistries with high efficiency.

Key Features:

  • Dual-Channel Output: Efficiently balances power distribution across two ports, supporting up to 800W DC and 300W AC (PRO version) or 220W AC (V2 version).
  • Wide Battery Compatibility: Supports LiPo, LiHV, LiIon, LiFe, Lilon, LTO, NiMH, and Pb batteries (1-6S for Lithium, 1-16S for NiMH, 1-10S for Pb).
  • Wireless Charging (PRO Version Only): Integrated wireless charging for compatible devices, reducing cable clutter.
  • Real-Time Smart Display: A 2.8-inch IPS LCD screen provides clear, real-time charging parameters from any viewing angle.
  • Compact Design: Space-saving dimensions for enhanced portability and adaptability.
  • Comprehensive Safety Protections: Includes short circuit, current, voltage, temperature, capacity, and time-out protection, housed in a flame-retardant casing.
  • Automated Fan Speed: Advanced automated cooling adjusts to real-time heat demand.
  • USB-C Output: 65W MAX 20.0V 3.25A output for fast charging external devices.

Package Contents:

  • ToolkitRC M6DAC PRO or M6DAC V2 Charger
  • AC Power Cable
  • USB-C Cable
  • Screen Protector
  • User Manual (this document)
ToolkitRC M6DAC V2 package contents
Figure 3: Typical package contents for the M6DAC V2 charger.

4. Specifications

Below is a detailed comparison of the M6DAC PRO and M6DAC V2 models, along with the original M6DAC for reference.

ToolkitRC M6DAC PRO, V2, and M6DAC Specifications Comparison Table
Figure 4: Detailed specifications comparison for M6DAC PRO, M6DAC V2, and M6DAC models.
Table 1: General and Charger Specifications
Category Parameter M6DAC PRO M6DAC V2 M6DAC
General Product Size 116×112×63mm 116×112×63mm 127×106×57mm
Product Weight 520g 520g 520g
Packing Size 164×135×68mm 164×135×68mm 158×134×63mm
Packaging Weight 670g 670g 700g
LCD IPS 2.8" LCD 320×240px IPS 2.8" LCD 320×240px IPS 3.5 inch LCD 480×320 Pixel
Charger Input Voltage AC 100-240V @MAX 330W, DC 7-28V@MAX 32A AC 100-240V @MAX 220W, DC 7-28V@MAX 32A DC 7.0-28.0V @MAX 30A, AC 100-240V @ MAX 2.5A
Type of Battery LiPo LiHV LiFe Lilon LTO @1-6S, NiMH @1-16S Pb@1-10S LiPo LiHV LiFe Lilon LTO @1-6S, NiMH @1-16S Pb@1-10S LipoLiHVLiFe Lion@1-6S, NiMh @1-16SPb @1-10S
Charging Power 1.0-16.0A @ 400W/CH, 28A@700W SYNC 1.0-16.0A @ 400W/CH, 28A@700W SYNC 0.1-15A @350W *2 (Asynchronous mode), 0.1-25A @700W (Synchronous mode)
Discharging Power 1.0-16.0A @ 400W/CH Extra Discharge, 1.0-16.0A @ 400W/CH Recycling, 0.1-3.0A @ 15W/CH Normal 1.0-16.0A @ 400W/CH Extra Discharge, 1.0-16.0A @ 400W/CH Recycling, 0.1-3.0A @ 15W/CH Normal 350W@MAX15A*2 (Recycle mode), 15W@3A *2 (Normal mode)
Power Output 0.5-16.0A @1.0-28.0V @400W /CH 0.5-16.0A @1.0-28.0V @400W /CH N/A
TYPE-C Output 65W MAX 20.0V 3.25A or Upgrade 65W MAX 20.0V 3.25A or Upgrade MAX 65W 3.25A @20.0V or Upgraded (USBC Power)
USB Protocol PD3.0/PD2.0/PPS/QC4/QC3.0/QC2.0, AFC/FCP/SCP/PE2.0/PE1.1/SFCP/VOOC PD3.0/PD2.0/PPS/QC4/QC3.0/QC2.0, AFC/FCP/SCP/PE2.0/PE1.1/SFCP/VOOC PD,QC,AFC,FCP,SCP,PE,SFCP,VOC (USBC Protocol)
Wireless Power 10W None None

5. Setup

5.1 Connecting Power

The M6DAC PRO/V2 charger supports both AC and DC power inputs.

  1. AC Power (100-240V): Connect the provided AC power cable to the AC input port on the rear of the charger and then to a wall outlet.
  2. DC Power (7-28V): Connect a suitable DC power source (e.g., a power supply or another battery) to the DC input port on the rear of the charger using an XT60 connector. Ensure the DC input voltage is within the specified range.
Rear view of ToolkitRC M6DAC charger showing AC and DC input ports
Figure 5: Rear view of the charger, highlighting AC 100-240V and DC 7-28V input ports, and the USB-C output port.

5.2 Initial Power On

Once connected to a power source, the charger will power on and display the main interface on its IPS LCD screen.

ToolkitRC M6DAC charger with IPS LCD display showing charging status
Figure 6: The smart 2.8-inch IPS LCD display provides clear, real-time charging status.

6. Operating Instructions

6.1 Charging a Battery

  1. Connect Battery: Connect your battery to one of the charging ports (XT60) on the front of the charger. Ensure the balance lead (if applicable) is also connected to the corresponding balance port.
  2. Select Battery Type: On the charger's display, navigate to the battery type selection and choose the correct chemistry (e.g., LiPo, LiHV, NiMH).
  3. Set Cell Count/Voltage: Confirm or set the correct cell count (e.g., 3S, 6S) or voltage for your battery.
  4. Set Charge Current: Adjust the charging current (in Amperes) according to your battery's specifications. A common rule is 1C (e.g., for a 5000mAh battery, set 5.0A).
  5. Start Charging: Confirm all settings and start the charging process. The display will show real-time charging parameters.
ToolkitRC M6DAC charger with two batteries connected for charging
Figure 7: Powerful dual output with smart power distribution, allowing two batteries to be charged simultaneously.

6.2 Wireless Charging (M6DAC PRO Only)

The M6DAC PRO features a 10W wireless charging pad. Simply place a compatible device (e.g., smartphone) on the designated wireless charging area on top of the charger to begin charging.

ToolkitRC M6DAC PRO with a smartphone wirelessly charging
Figure 8: The M6DAC PRO features a new added wireless charging capability.

6.3 USB-C Output

The USB-C output port on the rear of the charger can be used to fast charge other devices, delivering up to 65W of power.

ToolkitRC M6DAC charger connected via USB-C to a laptop for charging
Figure 9: The 65W USB-C output can be used for super flash charging of compatible devices like laptops.

7. Maintenance

  • Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure the cooling fan vents are not obstructed to allow for proper airflow. The automated fan speed system helps manage heat.
  • Store the charger in a cool, dry place when not in use.
  • Regularly inspect cables and connectors for any signs of wear or damage. Replace damaged components immediately.
ToolkitRC M6DAC charger with animated fan showing airflow
Figure 10: The automated fan speed system provides advanced cooling based on real-time heat demand.

8. Troubleshooting

  • Charger not powering on: Check if the AC or DC power input is correctly connected and providing power. Ensure the power source is active.
  • Battery not charging: Verify that the battery is properly connected to the charging port and balance port (if used). Double-check the battery type, cell count, and charging current settings on the charger.
  • Error message on screen: Refer to the specific error code displayed on the screen. Common errors relate to incorrect battery settings, connection issues, or internal faults. Disconnect the battery and power, then reconnect to reset.
  • Overheating: Ensure the charger's vents are clear and it's operating in a well-ventilated area. If overheating persists, reduce the charging current or discontinue use and contact support.

9. User Tips

  • For optimal performance and battery longevity, always charge at the recommended C-rate for your battery.
  • Utilize the balance charging feature for multi-cell Lithium batteries to ensure cell voltage consistency and safety.
  • Take advantage of the USB-C output to charge your portable devices while your main batteries are charging, maximizing efficiency.
  • Keep the firmware updated to ensure access to the latest features and improvements. Check the ToolkitRC website for updates.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact ToolkitRC customer service or the authorized dealer from whom you purchased the product. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.