Introduction
Thank you for choosing the Eweadn H2Series Wireless Gaming Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your mouse to ensure optimal performance. The H2Series offers a lightweight, ergonomic design with advanced sensors and versatile connectivity options for an unparalleled gaming experience.
The Eweadn H2Series includes models such as H2, H2Pro, and H2SE, each offering specific features and battery capacities. Please refer to the specifications section for detailed differences.
Package Contents
Please check the package for the following items:
- Eweadn H2Series Wireless Gaming Mouse
- 2.4G USB Receiver
- Type-C Charging/Data Cable (Paracord)
- User Manual
- Anti-slip Grips (optional, may vary by model)
Setup
1. Charging the Mouse
Before first use, it is recommended to fully charge the mouse. Connect the supplied Type-C charging cable to the mouse's Type-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The mouse will indicate charging status (e.g., LED indicator).

Image: Eweadn H2Series mouse connected via Type-C cable, illustrating wired connection and charging capability.
2. Connecting the Mouse
The Eweadn H2Series supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth. You can switch between these modes using the switch located on the bottom of the mouse.

Image: Bottom view of the mouse, highlighting the mode switch (2.4G, OFF, BT) and the storage compartment for the 2.4G USB receiver.
2.1. 2.4G Wireless Connection
- Locate the 2.4G USB receiver stored in the compartment on the bottom of the mouse.
- Plug the 2.4G USB receiver into an available USB port on your computer.
- Slide the mode switch on the bottom of the mouse to the "2.4G" position.
- The mouse should automatically connect to your computer.
2.2. Bluetooth Connection
- Slide the mode switch on the bottom of the mouse to the "BT" (Bluetooth) position.
- On your computer or device, go to Bluetooth settings and enable Bluetooth.
- Search for new devices. The mouse should appear as "Eweadn H2Series" or similar.
- Select the mouse to pair and connect.
2.3. Wired Connection
- Connect the supplied Type-C cable to the mouse's Type-C port and the other end to a USB port on your computer.
- The mouse will function as a wired mouse and charge simultaneously.
- Ensure the mode switch is not in the "OFF" position, or it may automatically switch to wired mode.
Operating Instructions
1. DPI Adjustment
The mouse features adjustable DPI (Dots Per Inch) settings, allowing you to customize cursor sensitivity. The maximum DPI varies by model (up to 24000 DPI for H2/H2SE, up to 32000 DPI for H2Pro). There is typically a dedicated DPI button on the mouse, or it can be adjusted via software (if available).

Image: Mouse highlighting its high DPI capability for precise tracking.
2. Buttons and Functions
The Eweadn H2Series mouse typically includes the following buttons:
- Left Click Button
- Right Click Button
- Scroll Wheel (also functions as a middle click button)
- Two Side Buttons (electroplated for durability)
- DPI Cycle Button (usually located near the scroll wheel or on the bottom)
These buttons can often be customized using dedicated software (if provided by Eweadn).
3. Polling Rate
The mouse supports a dual 1K (1000Hz) polling rate, ensuring rapid response times and smooth cursor movement, crucial for competitive gaming.

Image: Features overview, including the 1000Hz return rate and PAW3395 sensor.
4. Ergonomics and Grip
The mouse features a symmetrical design, making it comfortable for various hand sizes (small to medium) and grip styles, including palm, claw, and fingertip grips.

Image: Symmetrical design of the mouse, demonstrating compatibility with various grip types.
Maintenance
1. Cleaning
The mouse is equipped with an ice-cooling coating that is anti-fouling and easy to clean. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the mouse's internal components.

Image: Description of the ice-cooling coating, highlighting its easy-to-clean properties.
2. Battery Care
To maximize battery lifespan, avoid completely draining the battery frequently. Charge the mouse when the battery indicator shows low power. The H2Pro model features an 800mAh battery, offering over 130 hours of usage on a full charge, while the H2/H2SE models have a 500mAh battery.

Image: Internal view of the mouse showing the 800mAh battery, emphasizing long battery life.
Troubleshooting
- Mouse not responding: Ensure the mouse is charged. Check the connection mode switch (2.4G, BT, Wired) is set correctly. For 2.4G, ensure the USB receiver is properly plugged in. For Bluetooth, ensure Bluetooth is enabled on your device and the mouse is paired.
- Lag or Disconnections (Wireless): Ensure the 2.4G receiver is not obstructed and is close to the mouse. Avoid interference from other wireless devices. For Bluetooth, ensure your device's Bluetooth drivers are up to date.
- DPI not changing: Press the DPI button to cycle through settings. If using software, ensure it's running and configured correctly.
- Buttons not working: Check for any physical obstructions. If using software, verify button assignments.
Specifications
Below is a comparison of the Eweadn H2Series models:

Image: Detailed comparison of H2 and H2Pro model specifications.
| Feature | H2 / H2SE | H2Pro |
|---|---|---|
| Product Name | Pioneer H2 Series Lightweight Gaming Mouse | |
| Model | H2 / H2SE | H2Pro |
| Color Options | Black, White, Raspberry Pink | |
| Product Size | 119mm * 60mm * 39mm | |
| Suitable for Hand Shape | Small and medium-sized hands | |
| Micro Movement | Huanyu left and right 120 million times, middle key and side key 3 million times | Huanyu left and right 120 million times, middle key and side key 3 million times |
| Coating Process | Imported superglide skin-like coating (Ice-cooling coating) | |
| Side Scroll Wheel Craftsmanship | Electroplated side button roller | Electroplated side buttons + metal scroll wheel |
| Sensor | PAW3311 | PAW3395 (26000 DPI | 650 IPS | 50G) |
| Main Control Chip | Pioneer's self-developed main control chip (Eweadn) | |
| Transmission Technology | Eweadn?swift speed wireless technology | |
| DPI | 24000 DPI | 32000 DPI |
| Return Rate | Wired 1K / Wireless 1K | |
| Battery | 500mAh | 800mAh |
| Weight | Approximately 62g (varies slightly by model) | |
| Connection Method | Wired / 2.4G / Bluetooth (Tri-mode) | |
| Packaging Accessories | Wireless receiver, paracord charging/data cable, manual, anti-slip grip | |
User Tips
- Optimize for Gaming: For competitive gaming, consider using the 2.4G wireless or wired connection for the lowest latency and most stable performance.
- Customization: If available, download the official Eweadn software to customize button assignments, macros, and fine-tune DPI settings beyond the on-mouse adjustments.
- Battery Management: To prolong battery life during long gaming sessions, consider switching to wired mode when convenient, especially if your model has a 500mAh battery.
- Grip Comfort: Experiment with different grip styles (palm, claw, fingertip) to find what feels most comfortable and provides the best control for your hand size and gaming style.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Eweadn website or contact your retailer. Keep your proof of purchase for warranty claims.
Product Showcase Video
Video: A brief showcase of the Eweadn H2Series Wireless Gaming Mouse, demonstrating its design and features.





