Introduction
The Monzlteck Adjustable Under Desk Mount is designed to securely hold your PC, NAS, CPU, UPS, or small form factor desktop tower beneath your desk. This solution helps to free up valuable desk space, protect your equipment from accidental damage, and improve airflow for better cooling. Its adjustable design ensures compatibility with a wide range of devices.
Package Contents
- Adjustable Under Desk Mount Bracket
- Mounting Template (x1)
- M4x16 Screws (x8)
Image: Included mounting template and screws.
Setup and Installation
Follow these steps to install your Monzlteck Under Desk Mount:
- Mark Location: Place the mounting template (W-C) on the underside of your desk where you intend to install the mount. Use a pencil to mark the locations for drilling the holes.
- Prepare for Drilling: Ensure the area is clear and safe for drilling.
- Drill Holes: Drill pilot holes at the marked locations. The diagram suggests a 2mm drill bit depth.
- Attach Bracket: Align the mount bracket with the drilled holes. Use the provided M4x16 screws (W-A) to securely attach the bracket to the underside of the desk.
- Insert Device: Slide your PC, NAS, or other compatible device into the mounted bracket.
- Secure Device: Adjust the bracket's width using the adjustment knobs (W-B) to firmly hold your device in place. Ensure it is snug but not overly tight to avoid damage.
- Final Position: Verify that the device is securely held and the mount is stable.
Image: Step-by-step installation guide.
Visual Demonstration
Video: Demonstration of the mount's adjustability and how a PC slides into the bracket.
Operating the Mount
The Monzlteck Under Desk Mount features an adjustable design to accommodate various device sizes. To adjust the width:
- Loosen the adjustment knobs on the side of the bracket.
- Slide the movable side of the bracket to match the width of your device.
- Insert your device into the bracket.
- Tighten the adjustment knobs until the device is held firmly and securely.
The adjustment range is between 107mm (4.2 inches) and 203mm (8 inches).
Image: PC mounted under desk.
Image: NAS mounted under desk.
Maintenance
To ensure the longevity and proper function of your Monzlteck Under Desk Mount:
- Cleaning: Wipe the mount periodically with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Fastener Check: Regularly inspect all screws and adjustment knobs to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Load Capacity: Do not exceed the recommended weight capacity of the mount.
Troubleshooting
- Device does not fit: Verify the dimensions of your device against the mount's adjustable range (4.2-8 inches / 107-203mm). Ensure the adjustment knobs are fully loosened before attempting to insert the device.
- Mount feels loose or unstable: Check all mounting screws securing the bracket to the desk and the adjustment knobs holding the device. Ensure they are tightened securely. If the issue persists, re-evaluate the installation location for desk material integrity.
Specifications
| Feature | Specification |
|---|---|
| Model Number | DX-02 |
| Material | Carbide |
| Height | 150mm / 5.9in |
| Depth (Top Plate) | 120mm / 4.7in |
| Width (Top Plate) | 54mm / 2.1in |
| Base Width | 50mm / 2in |
| Adjustable Width Range | 107-203mm / 4.2-8in |
Image: Product dimensions and adjustable range.
User Tips
- Consider cable management solutions to keep your workspace tidy after mounting your device.
- Ensure adequate ventilation around your mounted device, especially for high-performance PCs or NAS units, to prevent overheating.
Warranty and Support
For any questions, technical support, or warranty inquiries regarding your Monzlteck Under Desk Mount, please contact us:
- Phone: +86 19311694256
- E-mail: pengchi2023712@126.com
- WhatsApp: +86 19311694256