1. Introduction
This manual provides essential information for the safe and efficient operation of your PowMr 3.2KW 24V Hybrid Solar Inverter. This device is designed to provide reliable power for various electrical appliances in home or office environments, integrating a pure sine wave inverter, an MPPT solar charger, and a battery charger into one compact unit. It is suitable for off-grid solar systems.

2. Features
- Pure sine wave inverter output.
- Configurable input voltage range for home appliances and personal computers.
- LCD display for real-time information and configurable settings.
- Configurable battery charging current via LCD settings.
- Configurable AC/solar charging priority via LCD settings.
- Compatible with mains voltage or generator power.
- Automatic restart when AC power is restored.
- Comprehensive overload, overtemperature, and short circuit protection.
- Smart battery charger to optimize battery performance.
- Cold start function.
- Optional WIFI/GPRS module for remote monitoring.
- Compatible with various battery types including FLD, AGM, Gel, and LiFePo4.
3. Setup and Installation
3.1 Physical Installation
The inverter should be mounted in a well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow. The unit features an intelligent cooling fan system that adjusts speed based on ambient temperature.

3.2 Wiring Connections
All wiring should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Refer to the connection diagrams below for proper wiring of the battery, PV array, and AC input/output.



3.3 Initial Power-Up
After all connections are securely made, switch on the inverter. The unit features a cold start function, allowing it to power on even without an AC input, provided the battery is connected and charged.
4. Operating Modes
4.1 Charging Modes
The inverter supports four configurable charging modes:
- Utility/AC Charge Battery First: Prioritizes charging the battery from the utility grid.
- Solar Power Charge Battery First: Prioritizes charging the battery from solar power.
- Solar + Utility Charge Battery at the Same Time: Charges the battery using both solar and utility power simultaneously.
- Only Solar Charge Battery: Charges the battery exclusively from solar power.

4.2 Output Priority Modes
The inverter allows configuration of three output source priority modes:
- Utility Source Power Load First: Prioritizes drawing power from the utility grid for the load.
- Solar Power Load First: Prioritizes drawing power from solar for the load.
- Solar + Battery Power Load at the Same Time: Draws power from both solar and battery simultaneously for the load.

4.3 LCD Display and Settings
The integrated LCD provides real-time charging information, mode display, voltage, current, and error code indications. Settings for charging current and AC/solar charging priority can be configured directly through the LCD interface.

5. Maintenance
To ensure optimal performance and longevity of your inverter, regular maintenance is recommended:
- Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
- Ensure ventilation openings are not blocked to allow the intelligent cooling fan to operate effectively.
- Periodically check all electrical connections for tightness and signs of corrosion.
- Monitor the LCD display for any error codes or unusual readings.
6. Troubleshooting and Protection
The PowMr Hybrid Solar Inverter is equipped with a smart protection system to safeguard itself and connected devices from various electrical issues. The LCD display will indicate error codes if a protection event occurs.

6.1 Protection Modes
- Charge low and high temperature protection
- Discharge low and high temperature protection
- Discharge overcurrent protection
- Charging overcurrent protection
- Charging undervoltage protection
- Short-circuit protection
- Solar panel reverse connection protection
- Battery overvoltage protection
- Over temperature protection
- Overload protection
If an error occurs, consult the user manual's specific troubleshooting section (not provided in this summary) for detailed steps based on the error code displayed on the LCD.
7. Specifications
| Parameter | Value |
|---|---|
| Model Number | POW-HVM3.2H-24V-N |
| Rated Output Power | 3.2KW 24V |
| Output Voltage Waveform | Pure Sine Wave |
| Output Voltage (V) | 120V (Note: Some regional models may be 220V/230Vac) |
| Output Frequency | 50Hz |
| Max. PV Array Power | 3000W |
| Nominal PV Voltage | 240VDC |
| PV Array MPPT Voltage Range | 30VDC-400VDC |
| Max. PV Array Open Circuit Voltage | 400VDC |
| Max Charging Current | 80A |
| DC Input | 24V |
| AC Charging Current | 60A (@V I/P=230Vac) |
| WiFi Module | Optional |
| Grid Connection Function | No (inverter does not supply power to the grid) |
| Parallel Function | No (single phase only) |
| Battery Compatibility | FLD, AGM, Gel, LiFePo4 Compatible |
| Dimensions (L x W x H) | 357mm (14.1in) x 273mm (10.8in) x 95mm (3.8in) |
| Weight | 6.5 kg |
| Certification | CE |


8. User Tips
- Output Voltage: While the product title and some specifications indicate a 120V output, some models or configurations may support 220V/230Vac. Always verify the specific output voltage of your unit before connecting appliances.
- Battery Connection: Ensure the battery is correctly connected and compatible with the inverter's specifications (FLD, AGM, Gel, LiFePo4). Incorrect battery types or connections can lead to damage.
- Ventilation: Maintain clear space around the inverter for optimal cooling, especially during high load operation.
9. Warranty and Support
This product is certified with CE, ensuring it meets European safety, health, and environmental protection requirements. For technical support, troubleshooting assistance, or warranty claims, please contact your vendor or the manufacturer directly. Keep your purchase receipt and product model information handy when seeking support.