DOOGEE BoneBeat Run Bone Conduction Headphones

1. Introduction

Thank you for choosing the DOOGEE BoneBeat Run Bone Conduction Headphones. These open-ear wireless earphones are designed for comfort and safety during outdoor activities, allowing you to enjoy music and calls while remaining aware of your surroundings. Featuring Bluetooth 5.4 connectivity and IP66 water resistance, they are built to withstand sweat and rain, making them ideal for sports and active lifestyles.

2. Package Contents

Please check the box for the following items:

• 1 x BoneBeat Run Headphones
• 1 x Elastic Strap
• 1 x Storage Pouch
• 1 x Type-C Charging Cable
• 1 x Packing Box
• 1 x User Manual
• 1 x Service Card

3. Setup

3.1 Charging the Headphones

1. Connect the provided Type-C charging cable to the charging port on the headphones.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show the charging status. A full charge provides approximately 10 hours of battery life. A quick 5-minute charge can provide up to 2 hours of music playback.

3.2 Power On/Off

• Power On: Press and hold the Multi-Function Button (MFB) for a few seconds until the LED indicator lights up and you hear a power-on prompt.
• Power Off: Press and hold the MFB for a few seconds until the LED indicator turns off and you hear a power-off prompt.

3.3 Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the MFB until the LED indicator flashes rapidly (usually blue and red alternately), indicating pairing mode.
3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
4. Select "DOOGEE BoneBeat Run" from the list of devices.
5. Once connected, the LED indicator will stop flashing and remain solid blue, and you will hear a connection confirmation.

3.4 Dual Device Connection

The BoneBeat Run headphones support connecting to two devices simultaneously, allowing for seamless switching between music, calls, and data.

1. Pair the headphones with the first device as described above.
2. Once connected, turn off Bluetooth on the first device.
3. Put the headphones back into pairing mode and pair them with the second device.
4. After connecting to the second device, re-enable Bluetooth on the first device. The headphones should automatically connect to both devices.
5. You can now switch between audio sources by playing media on either connected device.

4. Operating Instructions

4.1 Wearing the Headphones

The BoneBeat Run headphones feature an open-ear design and a flexible titanium frame for a secure and stable fit. Place the ear hooks over your ears and position the bone conduction transducers on your cheekbones, just in front of your ears. The elastic strap can be adjusted for a more secure fit, especially for smaller heads.

4.2 Button Functions

The headphones feature sports-optimized physical buttons for easy control:

• Multi-Function Button (MFB):
  • Press once: Play/Pause music, Answer/End call.
  • Press and hold (Power Off): Power On/Off.
  • Press and hold (Power Off, 5s): Enter pairing mode.
  • Double-press: Activate voice assistant.
• Volume + Button:
  • Press once: Increase volume.
  • Press and hold: Next track.
• Volume - Button:
  • Press once: Decrease volume.
  • Press and hold: Previous track.

4.3 Music and Calls

• Music Playback: Use the MFB to play or pause, and the Volume +/- buttons to adjust volume or skip tracks.
• Making/Receiving Calls: Use the MFB to answer or end calls. The integrated microphone allows for clear communication.

5. Maintenance

5.1 Cleaning

The BoneBeat Run headphones are IP66 water resistant, meaning they are protected against powerful water jets and dust. This makes them suitable for use in sweaty conditions or light rain. To clean:

• Wipe the headphones with a soft, damp cloth.
• Do not use harsh chemicals or abrasive cleaners.
• Ensure the charging port is dry before charging.

5.2 Storage

• Store the headphones in the provided storage pouch when not in use to protect them from dust and scratches.
• Avoid storing in extreme temperatures or high humidity.

6. Troubleshooting

• No Power: Ensure the headphones are fully charged. If not, connect them to a power source using the Type-C cable.
• Cannot Pair:
  • Make sure the headphones are in pairing mode (LED flashing blue/red).
  • Ensure Bluetooth is enabled on your device and it's within range.
  • Try turning off and on both the headphones and your device's Bluetooth.
  • Forget the device from your phone's Bluetooth settings and try pairing again.
• No Sound:
  • Check the volume levels on both the headphones and your connected device.
  • Ensure the headphones are properly connected via Bluetooth.
  • Verify that the audio output on your device is set to the headphones.
• Poor Sound Quality:
  • Ensure there are no obstructions between your device and the headphones.
  • Move closer to your device to reduce interference.
  • Check for any physical damage to the transducers.

7. Specifications

8. User Tips

• Situational Awareness: The open-ear design is excellent for outdoor activities. Always be mindful of your surroundings, especially when cycling or running near traffic.
• Comfort Adjustment: If the fit feels loose, try adjusting the elastic strap to ensure the transducers are comfortably and securely placed on your cheekbones for optimal sound transmission.
• Volume Control: While bone conduction allows you to hear ambient sounds, avoid excessively high volumes to protect your hearing and maintain awareness.
• Charging Habits: For prolonged battery health, avoid completely draining the battery frequently. Charge regularly, especially after long periods of use.

9. Warranty and Support

DOOGEE products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the service card included in your package or visit the official DOOGEE website. Keep your proof of purchase for warranty claims.