FAZY Android 14 Car Multimedia Player User Manual

1. Introduction

Thank you for choosing the FAZY Android 14 Car Multimedia Player. This device is designed to enhance your driving experience by integrating advanced Android features, navigation, and entertainment into your Audi vehicle. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your multimedia player.

2. Compatibility

This multimedia player is compatible with specific Audi A4 B8 and A5 8K models manufactured between 2008 and 2016. Compatibility depends on your vehicle's original MMI (Multi Media Interface) system. Please verify your car's system before installation.

2.1 Compatible Models

• Audi A4 B8 (2008-2016)
• Audi A5 8K (2008-2016)

2.2 MMI System Requirements

The unit is compatible with Audi vehicles equipped with:

• MMI 2G (Audi CD Changer version)
• MMI 3G (Audi Multimedia version)
• Vehicles with NO GPS Color Screen

Important: Please select the correct version (MMI 2G or MMI 3G) during purchase to ensure proper functionality.

2.3 Incompatible Systems

This multimedia player is NOT compatible with:

• Vehicles with a red screen display.
• Vehicles equipped with the 'Audi Chorus' system.

2.4 Audio Port Requirement

Your original car must have an AUX or AMI port for audio integration. If your car does not have either of these ports, an additional fiber decoder will be required for audio functionality.

3. Package Contents

Please check the package carefully upon receipt to ensure all components are present:

• FAZY Head Unit (12.3-inch display)
• Power Cable
• Small Speaker
• GPS Antenna
• 2 x USB Cables
• 4G Antenna
• Installation Tools (plastic pry tools)

Note: The specific cables may vary slightly between models. Please refer to the actual cables received.

4. Setup and Installation

The FAZY multimedia player is designed for plug-and-play installation. However, professional installation is recommended to avoid damage to your vehicle or the unit.

4.1 Pre-Installation Checklist

• Ensure your vehicle's ignition is off and the battery is disconnected.
• Confirm compatibility with your Audi model and MMI system (refer to Section 2).
• Verify that your car has an AUX or AMI port, or acquire a fiber decoder if necessary.
• Gather all necessary tools (included plastic pry tools, screwdrivers, etc.).

4.2 Wiring Diagram

Follow the wiring diagram carefully for correct connections. Incorrect wiring can cause damage.

1. LVDS Connector: Connects to the main display.
2. Backup Camera Input: For connecting an aftermarket reversing camera.
3. CCD+12V: Power supply for the backup camera.
4. ACC: Accessory power connection.
5. Audio-out: Audio output to the car's sound system.
6. Extra Speaker: Connects to the small speaker provided.
7. To CD Head Unit (A): Connects to your car's original CD head unit.
8. To Original Wire (B): Connects to the car's original wiring harness.
9. USB1 & USB2: Connect to the Android Screen for data and power.

4.3 SIM Card Installation

To utilize 4G network functionality, insert a Micro SIM card into the designated slot on the unit. Ensure the SIM card is inserted correctly as shown in the diagram.

4.4 Post-Installation Appearance

After successful installation, the new multimedia player will seamlessly integrate into your Audi's dashboard, replacing the original screen.

5. Operating Instructions

The FAZY multimedia player offers a wide range of functions accessible via its touch screen interface and integration with your car's original controls.

5.1 User Interface Overview

The system features an intuitive Android 14 interface. You can navigate through various applications and settings by touching the screen. The main screen typically displays quick access icons for Car Info, Dashboard, Z-Link (CarPlay/Android Auto), AVM, Bluetooth, Music, Video, Navigation, and Apps.

Video 5.1.1: Demonstration of the FAZY Multimedia Player's User Interface and Key Functions.

5.2 Dual System Switching

Easily switch between the Android 14 system and your car's original MMI system at any time. This allows you to retain all original car functionalities while enjoying the benefits of Android.

5.3 Smartphone Integration (CarPlay & Android Auto)

The unit features built-in Wireless CarPlay and Android Auto, allowing you to connect your smartphone for navigation, music, calls, and more. Use voice commands like "Hey Siri" for hands-free control.

5.4 Navigation

Utilize the built-in GPS module and pre-installed Google Maps for online navigation. You can also download other navigation applications from the Play Store.

5.5 Bluetooth Connectivity

The smart Bluetooth system supports mobile phone pairing for hands-free calling and audio streaming. It also supports steering wheel button control for convenience.

5.6 Multimedia Playback

Enjoy various media formats including MP3, MP4, WMA, and JPEG. The built-in DSP processor provides multi-dimensional surround lossless audio with customizable equalizer settings.

5.7 Split Screen Functionality

Multitask efficiently with the split-screen feature, allowing you to run two applications simultaneously, such as navigation and video playback.

5.8 Original Car Information Display

The unit integrates OEM car-centric functions, displaying essential information like speed, engine speed, fuel level, oil pressure, and safety warnings on the dashboard theme you choose.

5.9 CANBUS Protocol Compatibility

The system is compatible with the original CANBUS protocol, allowing normal use of existing car features such as steering wheel control, original camera support, original audio speaker support, original CD player support, and media knob control.

5.10 Reversing Camera Input

The unit supports your original car camera and radar. For vehicles without an original camera, an AHD 720P/1080P HD reversing camera can be added.

5.11 Advanced Driver-Assistance Systems (ADAS) DVR

Optional ADAS DVR functionality provides front vehicle distance prediction, anti-collision warnings, and lane departure warnings to enhance driving safety.

5.12 Tire Pressure Monitoring System (TPMS)

The unit supports USB TPMS. After correct installation of TPMS sensors in your car, the system will automatically monitor tire pressure and temperature, displaying real-time statistics.

5.13 Radio

The unit includes FM/AM Radio functionality. EU DAB+ Radio Universal is supported for enhanced sound quality and stronger signal in EU countries.

6. Specifications

The FAZY multimedia player comes in various configurations. Please refer to the table below for detailed specifications based on the version you purchased.

6.2 4G Network Frequency Bands

The device supports the following 4G network frequency bands:

Note: Most 4G bands in Japan & North America are not included in the EAU list. If you are in these regions, you might not see 4G network coverage with an EAU-specific unit.

7. Maintenance

Proper care and maintenance will ensure the longevity and optimal performance of your FAZY multimedia player.

7.1 Cleaning the Screen

• Use a soft, lint-free cloth (e.g., microfiber cloth) to gently wipe the screen.
• For stubborn smudges, lightly dampen the cloth with water or a screen-specific cleaning solution.
• Avoid using harsh chemicals, abrasive materials, or excessive moisture, as these can damage the screen.

7.2 General Care

• Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
• Do not attempt to disassemble or repair the unit yourself, as this will void the warranty.
• Keep the unit free from dust and debris.

8. Troubleshooting

If you encounter any issues with your multimedia player, please refer to the following common problems and solutions before contacting support.

8.1 No Audio Output

• Check AUX/AMI Connection: Ensure the AUX or AMI port is correctly connected. If your car lacks these ports, a fiber decoder is required.
• Volume Settings: Verify that the volume on both the multimedia player and your car's original audio system is not muted or set too low.
• Source Selection: Make sure the correct audio input source (e.g., AUX) is selected on your car's original MMI system.

8.2 No 4G Network Connection

• SIM Card Insertion: Ensure the Micro SIM card is correctly inserted into the slot.
• Network Coverage: Check if 4G network coverage is available in your current location.
• Band Compatibility: Verify that the unit's 4G frequency bands are compatible with your local network provider (refer to Section 6.2).
• Hotspot Connection: If using a mobile hotspot, ensure the hotspot is active and correctly configured.

8.3 Screen Not Responding / Frozen

• Restart the Unit: Turn off your car's ignition, wait a few minutes, and then restart the vehicle.
• Factory Reset: If the issue persists, perform a factory reset (refer to the 'Settings' menu on the device). Note that this will erase all user data.

8.4 CarPlay/Android Auto Not Connecting

• Bluetooth Pairing: Ensure your phone is correctly paired with the unit via Bluetooth.
• USB Connection: For wired connections, ensure the USB cable is securely connected to both the phone and the unit.
• Phone Settings: Check your phone's settings to ensure CarPlay/Android Auto is enabled and allowed to connect to the device.

9. User Tips

Here are some helpful tips to get the most out of your FAZY multimedia player:

• Verify Car Audio Ports: Before installation, double-check if your Audi has an AUX or AMI port. This is crucial for audio integration, and a fiber decoder might be needed otherwise.
• Check 4G Band Compatibility: If you plan to use a 4G SIM card, confirm that the unit's supported 4G frequency bands match your local network provider's bands, especially if you are in Japan or North America.
• Refer to Actual Cables: While this manual provides a general wiring diagram, always refer to the specific cables included in your package as they may vary slightly by model.
• Utilize Split Screen: Take advantage of the split-screen feature for enhanced multitasking, such as running navigation and a music player simultaneously.
• Explore DSP Settings: Customize your audio experience using the built-in DSP processor's equalizer settings to match your preferences.

10. Warranty and Support

FAZY is committed to providing high-quality products and excellent customer service.

10.1 Product Warranty

This product comes with a 2-Year Warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

10.2 Technical Support

For any technical questions, installation assistance, or troubleshooting not covered in this manual, FAZY offers 24/7 service support. Our online engineers are available to answer your questions and provide guidance.

Please contact FAZY customer service through the platform where you purchased the product for support inquiries.