Introduction
This manual provides essential information for the installation, operation, and maintenance of your Teverun Fighter Supreme 7260R 180mm Brake Disc. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Safety Information
- Always ensure the brake disc is installed by a qualified technician or an experienced individual. Incorrect installation can lead to serious injury.
- Do not attempt to modify the brake disc or the scooter's braking system. Modifications can compromise safety and performance, and the manufacturer will not be responsible for any issues arising from such changes.
- Regularly inspect the brake disc for wear, damage, or contamination. Replace immediately if any issues are found.
- Use only original or approved replacement parts.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Brake Disc |
| Model | 7260R |
| Diameter | 180mm |
| Compatibility | Teverun Fighter Supreme Electric Scooter (7260R model) |
| Material | High-grade metal alloy |
| Origin | Mainland China |
| Customization | Not customizable |

Figure 1: Teverun 7260R 180mm Brake Disc (single unit)

Figure 2: 1 PCS Teverun 7260R 180mm Brake Disc

Figure 3: 2 PCS Teverun 7260R 180mm Brake Discs
Installation Guide
This section outlines the general steps for installing the Teverun 7260R 180mm Brake Disc. Professional installation is highly recommended.
- Preparation: Ensure the scooter is powered off and secured on a stable stand. Gather necessary tools (e.g., hex keys, torque wrench, brake cleaner).
- Wheel Removal: Carefully remove the wheel assembly from the scooter that requires the brake disc replacement.
- Old Disc Removal: Locate the mounting bolts securing the old brake disc to the wheel hub. Unscrew these bolts and remove the old disc.
- Hub Cleaning: Clean the wheel hub's mounting surface thoroughly to remove any dirt, grease, or old threadlocker residue.
- New Disc Installation: Align the new Teverun 7260R 180mm Brake Disc with the mounting holes on the wheel hub. Insert the mounting bolts and tighten them gradually in a star pattern to the scooter manufacturer's specified torque. Use threadlocker if recommended.
- Brake Caliper Adjustment: Reinstall the wheel assembly. Adjust the brake caliper to ensure proper alignment with the new disc, allowing for smooth rotation without rubbing. Ensure brake pads are clean and in good condition.
- Testing: Before riding, manually spin the wheel to check for any rubbing or misalignment. Perform static brake tests to ensure proper braking function.

Figure 4: Teverun Fighter Supreme Electric Scooter with brake disc in place.
Operating the Brake System
The Teverun 7260R 180mm Brake Disc is designed for optimal braking performance on compatible Teverun electric scooters. To ensure safe operation:
- Always test your brakes before each ride.
- Apply brakes smoothly and progressively. Avoid sudden, harsh braking, especially at high speeds or on slippery surfaces.
- Be aware of your surroundings and anticipate braking needs.
- In wet conditions, braking performance may be reduced. Apply brakes earlier and more gently.
Maintenance
Regular maintenance is crucial for the longevity and performance of your brake disc.
Daily Checks:
- Visually inspect the brake disc for any signs of damage, cracks, or excessive wear.
- Check for any oil, grease, or other contaminants on the disc surface. Clean immediately if found using a dedicated brake cleaner.
Weekly/Monthly Checks:
- Clean the brake disc with a dedicated brake cleaner to remove accumulated dust and debris.
- Inspect brake pads for wear and replace if they are below the minimum thickness specified by the scooter manufacturer.
- Ensure all mounting bolts are securely tightened.
Replacement:
- Replace the brake disc if it shows signs of warping, deep grooves, or if its thickness falls below the manufacturer's minimum specification.
- Consider replacing both front and rear discs simultaneously for balanced braking performance, if applicable to your scooter model.
Troubleshooting
- Squealing or Grinding Noise:
- This often indicates contaminated brake pads or disc, worn pads, or improper caliper alignment. Clean the disc and pads, check pad wear, and adjust the caliper.
- Reduced Braking Performance:
- Could be due to worn brake pads, contaminated disc, air in the hydraulic system (if applicable), or a warped disc. Inspect components and address as needed. If hydraulic, bleeding the brakes might be required by a professional.
- Brake Rubbing:
- Usually caused by a misaligned brake caliper or a warped brake disc. Realign the caliper or replace the disc if warped.
User Tips
- For optimal performance, allow a short "bed-in" period for new brake discs and pads. This involves several moderate stops to properly seat the pads to the disc.
- Avoid touching the brake disc surface with bare hands, as oils can contaminate it and reduce braking efficiency.
- Store your scooter in a dry environment to prevent rust or corrosion on brake components.
Warranty and Support
This Teverun brake disc is designed for durability and performance. For specific warranty details, please refer to the purchase documentation or contact your retailer.
For technical support or any queries regarding this product, please contact the seller directly. Do not attempt repairs beyond basic maintenance if you are unsure.