1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your JONSBO D401 ATX PC Case. Please read this manual carefully before using the product to ensure proper installation and safe operation.
JONSBO D401 ATX Case Product Overview Video

JONSBO D401 ATX PC Case with Exoskeleton Frame Design and Dual 360 Water Cooling Support
2. Warnings & Safety Information
- Do not use in humid environments.
- Do not disassemble internal components without authorization.
- Ensure adequate ventilation to prevent overheating.
- Avoid high-temperature and high-humidity environments.
- Do not forcibly compress or deform the case.
- Prevent liquids from entering the interior.
3. Setup Instructions
3.1 Initial Placement
- Place the JONSBO D401 ATX PC Case on a stable, level surface to prevent accidental tipping or damage.
3.2 Component Installation
The D401 chassis features an exoskeleton frame design with a double-sided transparent glass for a panoramic view, and a brushed sun-patterned panel. It supports a 270-degree field of view and is designed for easy installation and maintenance.

Product Overview: The D401 chassis features an exoskeleton frame, double-sided transparent glass, and a dark gray metallic texture coating. It offers a 270-degree view and supports dual 360 water cooling, balancing performance, heat dissipation, and aesthetics.
- Install the motherboard (ATX, MicroATX, Mini-ITX compatible) and other components such as the CPU, RAM, and storage drives.
Motherboard and Cable Management
The chassis is compatible with ATX back-plug motherboards and offers ample space for cable management, with 43mm of back-line space for standard motherboards and 50mm for back-plug motherboards (including connectors/plugs).

Rear view of the D401 case, highlighting cable management space and compatibility with ATX back-plug motherboards.
Storage Drive Installation
The D401 supports various storage configurations:
- Back side: 2 x 2.5" SSD or 1 x 3.5" HDD + 1 x 2.5" SSD
- Power compartment: 1 x 2.5" SSD or 1 x 3.5" HDD

Diagram illustrating hard disk support and installation locations within the D401 case.
Power Supply Installation
The case features separate upper and lower compartments for power supply installation, ensuring independent air ducts and stable operation. It supports ATX PS2 power supplies up to 200mm in length.

Illustration of the separate power supply positions in the D401 case, designed for optimal airflow.
Cooling System Installation
The D401 is designed for optimized thermal dissipation, supporting extensive air and water cooling solutions.
- Fan Support:
- Top: 3 x 120mm or 2 x 140mm fans (optional)
- Side: 3 x 120mm fans (optional)
- Rear: 1 x 120mm fan (optional)
- Power compartment: 3 x 120mm fans (optional)
- Water Cooling Support:
- Top plate: 240/280/360mm radiators (optional)
- Side: 360mm radiators (optional)

Air-cooled solution recommendation for the D401 case, showing fan placements and CPU cooler height support (up to 169mm).

Water-cooled solution recommendation for the D401 case, illustrating radiator and fan placements for dual 360mm setups.
Graphics Card Installation
The D401 supports graphics cards up to 439mm in length and features a rotating PCIE slot for vertical GPU installation. This allows for personalized display of chassis accessories.
Tips for Vertical GPU Installation:
- Vertical installation can be achieved by flipping the original backplane or purchasing a third-party adapter bracket separately.
- The original backboard provides adapter direction. Due to the suspended placement of the graphics card, it is necessary to install a graphics card bracket for lifting to avoid transportation damage.
- The graphics card adapter cable needs to be purchased separately.

Diagram showing the rotating PCIE slot for vertical graphics card installation.

Illustration of graphics card length support, showing a maximum GPU length of 439mm.
4. Operating Instructions
- Once all components are installed and secured, connect the power cord to the power supply unit and a wall outlet.
- Press the power button located on the side-mounted interface to power on the system.
4.1 Front Panel Connectivity
The side-mounted interface provides convenient access to essential ports:
- 1 x USB 3.2 Gen2 Type-C (10Gbps)
- 2 x USB 3.0 (5Gbps)
- 1 x Integrated headphone audio (2-in-1)
- Power button
- Reset button

Diagram of the side-mounted interface, detailing USB ports, audio jack, power, and reset buttons.
5. Maintenance
5.1 Cleaning and Dust Management
The D401 features a bottom magnetic dustproof net for convenient and fast maintenance and cleaning, helping to keep the chassis clean and improve airflow.

Illustration of the removable bottom magnetic dustproof net for easy cleaning.
5.2 Tool-Free Disassembly
The front panel, left panel, and right panel adopt a buckle method for screw-free fixation, allowing for convenient updates and maintenance.

Diagram demonstrating the three-sided tool-free disassembly feature for easy access to internal components.
6. Troubleshooting (FAQs)
- Unit fails to power on: Check all power connections to ensure they are securely plugged in.
- Poor heat dissipation: Clean any accumulated dust from the case and components. Consider adding additional fans to improve airflow. The case supports up to 10 fans.
- Excessive noise: Verify that all screws, especially those holding fans and components, are securely tightened. Loose screws can cause vibrations and noise.
7. Specifications
| Feature | Specification |
|---|---|
| Product Model | D401 |
| Color | Silver Grey |
| Product Dimensions (D*W*H) | 480.1mm * 250.8mm * 513.6mm (including footrest) |
| Materials | SPCC & SGCC steel plate, ABS plastic, Tempered glass |
| Compatible Motherboards | ATX, M-ATX, MINI-ITX |
| Drive Bays (Back side) | 2 x 2.5" SSD or 1 x 3.5" HDD + 1 x 2.5" SSD |
| Drive Bays (Power compartment) | 1 x 2.5" SSD or 1 x 3.5" HDD |
| Front Ports | 1 x USB 3.2 Gen2 Type-C, 2 x USB 3.0, 1 x AUDIO + MIC (2-in-1) |
| Fan Support (Top) | 3 x 120mm or 2 x 140mm (optional) |
| Fan Support (Side) | 3 x 120mm (optional) |
| Fan Support (Rear) | 1 x 120mm (optional) |
| Fan Support (Power compartment) | 3 x 120mm (optional) |
| Water Cooling Support (Top) | 240/280/360mm radiators (optional) |
| Water Cooling Support (Side) | 360mm radiators (optional) |
| Power Supply Support | ATX PS2 ≤ 200mm |
| Max CPU Cooler Height | ≤ 169mm |
| Max Graphics Card Length | ≤ 439mm |
| Net Weight | 8.1kg |

Detailed dimensions of the JONSBO D401 ATX PC Case.

Summary of key features including exoskeleton framework, 10 fan slots, ATX back insertion support, dual 360 water cooling, upper and lower compartment structure, and long graphics card support.
8. User Tips
- The JONSBO D401 is praised for its aesthetic design. Take advantage of the transparent glass panels and ample space to showcase your components and RGB lighting for a visually appealing build.
9. Warranty & Support
9.1 Warranty Information
The JONSBO D401 ATX PC Case comes with a 1-year warranty from the date of purchase.
9.2 Additional Resources
For more detailed information, diagrams, or specific installation guides, you may refer to the official user manual PDF available here.