Introduction
Thank you for choosing the Womier L75 Wireless Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, and maintain your keyboard to ensure optimal performance and longevity. The Womier L75 features a 75% layout, tri-mode connectivity (Bluetooth, 2.4GHz wireless, and wired USB), a gasket structure for enhanced typing feel, hot-swappable switches, and customizable RGB backlighting.
Key Features
- 75% Layout: Compact design retaining essential keys.
- Tri-Mode Connectivity: Seamless switching between Bluetooth, 2.4GHz wireless, and wired USB.
- Gasket Structure: Provides a softer, more cushioned typing experience.
- Multi-Function Knob: Controls both multimedia and backlight settings.
- Crystal Jelly Keycaps: Durable PBT plastic keycaps with dye-sublimation printing.
- 16 Dynamic RGB & Side Light: Customizable multicolor backlighting.
- Programmable Software: Allows for RGB design, key remapping, and macro editing.
- 4000 mAh Battery: Long-lasting power for wireless use.
- Hot-Swappable Switches: Supports 3-pin & 5-pin mechanical switches for easy customization.
Package Contents
Please check the package for the following items:
- Womier L75 Wireless Mechanical Keyboard
- USB-C Cable (for wired connection and charging)
- 2.4GHz Wireless Receiver
- Keycap Puller
- Switch Puller
- User Manual
Setup Instructions
1. Initial Charging
Before first use, it is recommended to fully charge the keyboard. Connect the keyboard to a USB power source using the provided USB-C cable. The battery indicator lights will show charging status.
2. Connectivity Modes
The Womier L75 supports three connection modes: 2.4GHz Wireless, Bluetooth, and Wired USB. Use the switch on the side of the keyboard to select your desired mode.
2.1. 2.4GHz Wireless Connection
- Flip the mode switch on the side of the keyboard to '2.4G'.
- Plug the 2.4GHz wireless receiver into an available USB port on your device.
- The keyboard should connect automatically.
2.2. Bluetooth Connection
- Flip the mode switch on the side of the keyboard to 'BT'.
- On your device, enable Bluetooth and search for new devices.
- Select 'Womier L75' from the list of available devices to pair.
2.3. Wired USB Connection
- Flip the mode switch on the side of the keyboard to 'Wired'.
- Connect the USB-C cable to the keyboard and the other end to a USB port on your device.
- The keyboard will function as a wired device and charge simultaneously.
3. Operating System Switch
Use the 'Win/Mac' switch on the side of the keyboard to toggle between Windows and macOS layouts for optimal key functionality.
Operating Instructions
1. Multi-Function Knob Control
The knob located on the top right of the keyboard serves dual purposes: lighting control and multimedia control. Long press the knob for 5 seconds to switch between these two modes.
1.1. Lighting Control Mode
- Click: Switch between different lighting effects.
- Rotate: Adjust the backlight brightness (clockwise for brighter, counter-clockwise for dimmer).
1.2. Multimedia Mode
- Click: Play/Pause media.
- Rotate: Adjust volume (clockwise for volume up, counter-clockwise for volume down).
2. RGB Backlight Control (FN Combinations)
The 16.8 million RGB backlight can be adjusted using the following FN key combinations:
- FN + \|: Light Mode Switching
- FN + Left Arrow: Decrease Backlit speed
- FN + Right Arrow: Increase Backlit speed
- FN + Up Arrow: Increase Backlit brightness
- FN + Down Arrow: Decrease Backlit brightness
- FN + PgUp: Light Color Switching
- FN + PgDn: Custom lighting (requires software)
- FN + Backspace: ON/OFF RGB
- FN + Tab: Side Light Mode Switching
3. Programmable Software
The Womier L75 features an easy programmable driver that allows for advanced customization. You can:
- RGB Design: Create your own unique backlight effects.
- Remap Keys: Customize every key to improve efficiency.
- Macro Editing: Combine multiple shortcuts into a single key.
Please download the official software from the Womier website for full functionality.
4. Keyboard Shortcuts
The keyboard includes dedicated shortcuts for both Windows and macOS environments. Ensure the 'Win/Mac' switch is set correctly for your operating system.
| Combination | Function |
|---|---|
| FN + F1 | My Computer |
| FN + F2 | |
| FN + F3 | Home |
| FN + F4 | Search |
| FN + F5 | Refresh |
| FN + F6 | Music |
| FN + F7 | Previous Track |
| FN + F8 | Pause/Play |
| FN + F9 | Next Track |
| FN + F10 | Mute |
| FN + F11 | Volume - |
| FN + F12 | Volume + |
| Key | Function |
|---|---|
| F1 | Screen Brightness - |
| F2 | Screen Brightness + |
| F3 | Mission Control |
| F4 | Search |
| F5 | Call out Siri |
| F6 | Screenshot |
| F7 | Previous Track |
| F8 | Pause/Play |
| F9 | Next Track |
| F10 | Mute |
| F11 | Volume - |
| F12 | Volume + |
Maintenance
1. Cleaning Your Keyboard
- Disconnect the keyboard from all power sources and devices before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and casing.
- For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Avoid spraying liquids directly onto the keyboard.
2. Replacing Keycaps and Switches (Hot-Swappable)
The Womier L75 features hot-swappable sockets, allowing you to change switches without soldering. It supports both 3-pin and 5-pin mechanical switches.
- Remove Keycap: Use the keycap puller to gently pull the keycap straight up.
- Remove Switch: Use the switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
- Install New Switch: Align the pins of the new switch with the holes on the PCB. Gently push the switch down until it clicks into place. Ensure the pins are not bent.
- Install New Keycap: Place the new keycap onto the stem of the switch and press down firmly.
Troubleshooting
- Keyboard not responding: Ensure the correct connectivity mode (2.4G, BT, Wired) is selected. Check battery level and charge if necessary. For wired mode, ensure the USB-C cable is securely connected.
- 2.4GHz connection issues: Try plugging the receiver into a different USB port. Ensure no strong interference sources are nearby.
- Bluetooth connection issues: Ensure Bluetooth is enabled on your device and the keyboard is in pairing mode. Try unpairing and re-pairing the keyboard.
- Backlight not working or incorrect: Check FN key combinations for backlight control (brightness, mode, color). Ensure RGB is not turned off (FN + Backspace).
- Keys not registering: If specific keys are not working, try removing and re-inserting the switch for that key, as it might not be seated correctly.
- Software not detecting keyboard: Ensure the keyboard is connected via wired USB mode when using the programmable software.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | womier |
| Model | L75 |
| Keyboard Standard | Mini Keyboard (75% Layout) |
| Type | 2.4Ghz Wireless, Bluetooth, USB Wired |
| Operation Style | Mechanical |
| Switches Hot Swap | Yes (Supports 3-pin & 5-pin) |
| Switches Manufacturer | GATERON (Womier POM Beige Switch) |
| Keycup Material | PBT plastic |
| Keycup Printing | Dye-sublimation |
| Backlight Type | Multicolor RGB |
| Battery Included | Yes (4000 mAh) |
| Interface Type | USB-C |
| Language | English |
| Application | Desktop, Laptop, Number, Tablet |
| Certification | CE |
| Dimensions (L x W x H) | 329mm x 143mm x 33mm (back) / 23mm (front) |
| Weight | Approx. 1.3 kg (packaged) |
Womier POM Beige Switch Specifications:
- Operating Force: 50 ± 5gf
- Conduction Stroke: 1.8 ± 0.4mm
- Total Travel: 3.8 ± 0.2mm
User Tips
- Experiment with Switches: Since the keyboard is hot-swappable, don't hesitate to try different switch types to find your preferred typing feel.
- Customize with Software: Take advantage of the programmable software to personalize your RGB lighting, remap keys for specific workflows, and create macros for complex tasks.
- Battery Management: For optimal battery life, consider using wired mode when at your desk and switching to wireless for portability.
- Firmware Updates: Periodically check the Womier official website for any firmware updates that might improve performance or add new features.
Warranty and Support
Womier products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Womier website or contact their customer service directly. Keep your proof of purchase for warranty claims.
