1. Introduction
Thank you for choosing the WOLFBOX jump starter with air compressor. This manual provides detailed instructions to ensure a great user experience and your safety. Please read all instructions carefully before using this product and keep this manual for future reference.
Important Notes
- It is recommended to charge the product upon receiving it. You can start charging the device using the included charging cable while reading this manual. (Note: This product does not include an adapter).
- This device is designed for vehicles (equipment) with 12V batteries. Using it with other types of batteries may be dangerous. Please read and understand all safety information before use.
2. Packing List
Please check the contents of your package:
- WOLFBOX Jump Starter with Air Compressor (Main Unit)
- Smart Battery Clamps
- Air Hose
- USB-C to USB-C Charger Cable
- EVA Pack (Carrying Case)
- User Manual
- Air Nozzles:
- Long American Nozzle
- American Needle Nozzle
- French to American Nozzle

3. Components and Functions
Familiarize yourself with the different parts and controls of your WOLFBOX device:

- Pressure Unit Switch: Toggles between pressure units (PSI, BAR, KPA, Kg/cm²).
- Mode Switch: Cycles through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
- LED Flashlight Switch: Activates and changes LED light modes.
- Pressure Increase/Decrease Buttons: Adjusts preset pressure values.
- Power/Inflation Start/Stop Button: Powers the device on/off and starts/stops inflation.
- Inflation Port: Connects the air hose for inflation.
- Display Screen: Shows battery level, current pressure, preset pressure, mode, and other functions.
- USB-A Output Port (QC3.0 5V/9V/12V): For charging external devices.
- USB-C Input/Output Port (Max power: PD65W): For charging the main unit and external devices.
- 12V Car Start Port: Connects the smart battery clamps for jump starting.
- 15V/10A Output Port: For specific 15V/10A devices.
Button Descriptions
- Power On: Press the power button for 3 seconds to turn on the device. The screen will display the battery level, current pressure, preset pressure, unit, and mode.
- Indications: Upon powering on, all indicator lights will light up for 1 second, then display the battery level, mode unit, preset pressure, and current pressure.
- Start Inflation: Press the power button briefly to start inflation; press again to stop.
- Pressure Unit: Press the "PSI" button briefly to switch the pressure unit; press the "M" button briefly to switch modes.
- Adjust Pressure: Use the "+" and "-" buttons to adjust the preset pressure value. Units: KPA: ±5; BAR: ±0.1; PSI: ±1; kg/cm²: ±0.1. Press and hold for 1 second to quickly adjust the preset value. If the maximum value is reached, it will return to the minimum value and vice versa.
4. LED Display Instructions
The 3.8-inch dual-value digital display screen provides clear information:

- Battery Level: Shows the remaining charge.
- Modes: Indicates the selected inflation mode (Car, Motorcycle, Bicycle, Ball).
- Real-Time Value: Displays the current pressure.
- Preset Value: Shows the target pressure for inflation.
- Pressure Unit: Indicates the selected pressure unit (BAR, PSI, KPA, Kg/cm²).
- Fast Charge Indicator: Lights up when fast charging is active.
- Output: Indicates power output to external devices.
- Input: Indicates power input for charging the unit.
- Low Temperature Alarm: Alerts when the battery temperature is too low for safe operation.
- High Temperature Alarm: Alerts when the battery temperature is too high for safe operation.
5. Setup and Operation
5.1. How to Jump Start a 12V Vehicle
(Ensure Battery Level >50%)
- Insert the blue connector of the smart battery clamp into the 12V Car Start Port on the main unit, ensuring the clamp indicator light is off.
- Correctly connect the clamps to the car battery terminals: red clamp to the positive terminal (+) and black clamp to the negative terminal (-).
- Follow the instructions provided by the clamp indicator lights for the next steps:

Green light steady on: Indicates correct connection and power supply, enabling emergency startup.

Normal Start Mode: Attach clamps, ensure green indicator, start vehicle. Red light steady on: Indicates incorrect polarity connection. Please reconnect correctly. Wait until the green light is steady on before performing emergency startup.
Green light flashing: Indicates low battery voltage. Press the BOOST button and wait for the green light to stay on steadily. Complete the startup procedure within 30 seconds.

BOOST Start Mode: Attach clamps, long press BOOST, start vehicle. Neither red nor green light is on: Indicates the battery may be completely damaged. Ensure correct polarity connection, then press the BOOST button. Wait for the green light to stay on steadily. Complete the startup procedure within 30 seconds.
- Turn the car ignition switch to the START position.
- After the car starts, remove the battery clamps.
5.2. Inflating Tires and Other Items
The WOLFBOX jump starter includes a 160PSI air compressor for various inflation needs.

- Select Mode & Preset Values: Turn on the device. Use the Mode Switch to select the appropriate inflation mode (Car, Motorcycle, Bicycle, Ball, or Custom). Use the Pressure Increase/Decrease Buttons to set the desired pressure.
- Connect the Air Hose: Attach the air hose to the inflation port on the device, then connect the appropriate air nozzle to the item you wish to inflate (e.g., tire valve, ball valve).
- Start Inflation: Press the Power/Inflation Start/Stop Button to begin inflation. The device will automatically stop when the preset pressure is reached.

The device can inflate multiple tires on a single charge:
- Sedan (245/75 R17): Approximately 25 tires
- SUV (275/65 R18): Approximately 18 tires
- Pickup (315/70 R17): Approximately 6 tires
6. General Operation
6.1. Charging Electronic Devices
The WOLFBOX jump starter can also function as a power bank to charge your phone, tablet, and other electronic devices.
- Connect the USB plug of the adapter cable to the USB-C output port or USB-A output port on the main unit.
- Connect the charging head to your phone/tablet or other electronic device.
- Press and hold the power button for 3 seconds to turn on the device and start charging the electronic device.
Note: Charging cannot occur if the device is not powered on.

- Both USB-C and USB-A ports can work simultaneously. The "OUT" and "Battery Level" indicators will be on.
- Removing one port will not affect the other.
- If both USB-A and USB-C are removed, the device will auto shut down after 90 seconds.
- If the device is turned off while charging, it will stop charging the external device. Upon turning back on, it will resume charging.
6.2. Charging the Main Unit
To ensure your WOLFBOX jump starter is ready when you need it, keep it charged.
- Connect the USB-C to USB-C charger cable to a suitable charger (not included), then plug the charger into a power outlet.
- Insert the USB-C plug into the USB-C input port on the main unit.

6.3. Switching LED Light Modes
The built-in 400-lumen LED flashlight provides powerful lighting for roadside emergencies.
- Press and hold the power button for 3 seconds to turn on the device.
- Then, press the LED Flashlight Switch briefly to activate the LED light function.
- Briefly press the LED Flashlight Switch again to switch between light modes: constant light, white flashing light, and SOS.
Note: The LED flashlight cannot be used if the device is not powered on.

6.4. Temperature Protection
- When the battery temperature reaches $55^{\circ}C$, temperature protection activates. When it drops to $45^{\circ}C$, protection is lifted, allowing charging. The high-temperature icon is highlighted in protection mode.
- When the battery temperature drops below $0^{\circ}C$, temperature protection activates during charging. When it rises above $5^{\circ}C$, protection is lifted, allowing charging. The low-temperature icon is highlighted during protection. If the NTC disconnects, low-temperature protection activates, prohibiting output. When lifted, output resumes, and the icon is highlighted.
6.5. Auto Shut-Down Mechanism
To protect the battery life of the jump starter, an automatic shut-down mechanism is designed for prolonged standby times:
- If the LED light is on, the device will automatically shut down after 4 hours.
- If the LED light is off and the device is in standby mode, it will shut down after 2 minutes.
7. Maintenance and Storage
- Charging Frequency: The unit is designed to retain charge for 6-12 months. For a longer lifespan, it is recommended to charge it every 3 months.
- Storage Conditions: Do not store the product in environments with temperatures exceeding $60^{\circ}C$ ($140^{\circ}F$). Charge the product only within a temperature range of $0^{\circ}C$ to $45^{\circ}C$ ($32^{\circ}F$ to $113^{\circ}F$).
- Physical Care: Do not drop the product. If the product suffers an impact or damage, have it inspected by a qualified battery technician.
- Cleaning: Ensure all battery terminals are clean before connecting the clamps. Dirty or corroded battery terminals may reduce performance.
- Disposal: Dispose of lithium battery products according to local regulations at the end of their life. If the main unit leaks, dispose of it with appropriate measures.
8. Troubleshooting
If the following operations do not solve your issue, please stop using the device and contact customer service.
8.1. Jump Starter Error Information/Causes/Solutions
| Error Information | Cause | Solution |
|---|---|---|
| Red light steady | Clamps reversed | Correct polarity |
| Green light flashing | Low car battery voltage | Use boost function |
| Red light steady for 30s then off | 8 starts within 10 mins | Wait 10 mins |
| Low temperature protection icon | Low temperature protection below $0^{\circ}C$ | Protection is lifted above $5^{\circ}C$ |
| Over-temperature protection icon | Over-temperature protection above $55^{\circ}C$ | Protection is lifted below $45^{\circ}C$ |
8.2. Air Pump Error Information/Causes/Solutions
| Error Information | Cause | Solution |
|---|---|---|
| 1 or 4 battery bars flashing, high temp icon on. Surface temp >$120^{\circ}C$ | Overheating | Wait until temp <$100^{\circ}C$ |
| 1 battery bar flashing | Over-discharged battery | Charge the device |
| 1 or 3 battery bars flashing | Over-current or short circuit protection | Press power button to clear |
| 1 or 2 battery bars flashing. Tire pressure not reaching 20kpa within 50 seconds | Leakage in system | Check for leaks |
9. Technical Specifications
| Parameter | MegaVolt24 Air / JS24 Air | MegaVolt16 Air |
|---|---|---|
| Battery Capacity | 88.8Wh / 24000mAh | 59.2Wh / 16000mAh |
| Start Current | 1000A | 600A |
| Peak Current | 4000A | 3000A |
| USB-C Input/Output | PD65W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A) | |
| USB-A Output | QC3.0 18W (5V/3A, 9V/2A, 12V/1.5A) | |
| DC Output | 14V-16V | |
| Operating Temperature | -20°C ~ 60°C / -4°F ~ 140°F | |
| Full Charge Time | 1.5-2 hours approx | 1-1.5 hours approx |
| Dimensions (L*W*H) | 238.5*134*54.8mm | |
| Weight | 1550g | 1410g |
10. User Tips
- The WOLFBOX jump starter is robust and capable of starting larger vehicles like tractors and providing sufficient air for pickup truck tires.
- Always ensure the battery clamps are correctly connected to avoid polarity issues.
- The device's display is clear and easy to use for monitoring pressure and battery status.
- Remember to charge the unit regularly, especially every three months, to maintain optimal battery health and extend its lifespan.
11. Warranty and Customer Support
11.1. WOLFBOX Two (2) Year Limited Warranty
WOLFBOX provides a two (2) year limited warranty for this product. Please refer to the full warranty terms provided with your purchase or on the official WOLFBOX website for details.
11.2. Customer Service Center
If you have any problems with the function or installation, please feel free to reach us:
- Email: service.wolfbox@gmail.com
- Phone: +1 888 296 8399
- Website: wolfbox.com/contact-us


12. Safety Warnings and Precautions
Please read and adhere to all safety warnings to prevent injury or damage to the device.
- Read the manual carefully before using this product.
- This product is for 12V vehicle starting only. Using it on other vehicles may be dangerous.
- Avoid reversing the polarity of the clamps, as it can cause a short circuit leading to internal cell overheating or even fire.
- Do not use if the battery clamps or cables are damaged.
- Do not use as a replacement for a car battery.
- Do not leave the product connected to the car battery after starting the vehicle.
- Before starting, ensure all battery terminals are clean and the clamps are properly connected. Dirty or corroded battery terminals may reduce performance.
- Do not start the car more than 3 times in a row. Allow a 2-minute interval between starts to prevent overheating.
- After starting, remove the product from the car battery within 30 seconds to avoid damage.
- Do not short-circuit the battery clamps.
- Keep out of reach of children.
- Do not use as a toy.
- Do not expose the product to water or immerse it in water.
- Do not operate the product in explosive environments, such as near flammable liquids, gases, or dust.
- Do not modify or disassemble the product. Repairs should only be performed by qualified technicians.
- Do not expose the product to extreme heat or fire.
- Ensure someone is within hearing range or close enough to help you while using the product.
- Remove metallic accessories like rings, bracelets, and necklaces before using the product.
- Do not drop the product. If the product suffers an impact or damage, have it inspected by a qualified battery technician.
- Do not store the product in environments with temperatures exceeding $60^{\circ}C$ ($140^{\circ}F$).
- Charge the product only within a temperature range of $0^{\circ}C$ to $45^{\circ}C$ ($32^{\circ}F$ to $113^{\circ}F$).
- Do not start the vehicle while charging the main unit.
- If the main unit leaks, dispose of it with appropriate measures.
- In extreme conditions, battery leakage may occur. If liquid leaks from the product, do not handle it with bare hands. In case of skin contact, wash immediately with soap and water. If it contacts the eyes, rinse with cold running water for at least 10 minutes and seek medical attention.
- Dispose of lithium battery products according to local regulations at the end of their life.
- After using the product to start a vehicle, do not charge it immediately.
- Do not use the clamps to power other equipment.